JBIMR0001
|
Severe
|
A fault cannot be set on an exchange already containing a message.
Pattern({0}).
Cause: A component attempted
to perform an action considered illegal by the JSR208 specification.
Action: Try and determine
the component causing the exception and report a problem to Sun against
that component.
Resource Key: FAULT_ON_MSG
|
JBIMR0002
|
SEVERE
|
Status cannot be set on an exchange already containing a message.
Pattern({0}).
Cause: A component attempted
to perform an action considered illegal by the JSR208 specification.
Action: Try and determine
the component causing the exception and report a problem to Sun against
that component.
Resource Key: STATUS_ON_MSG
|
JBIMR0003
|
SEVERE
|
Current exchange status is ERROR. Changing status to DONE is
not allowed.
Cause: A component attempted
to perform an action considered illegal by the JSR208 specification.
Action: During component
shutdown, this exception is possible while the component is in the
processing of cleaning up. Other messages in the log file may give
you a clue as to whether this is the situation. If this is not the
situation, determine the component causing the exception and report
a problem to Sun against that component.
Resource Key: ERROR_STATUS
|
JBIMR0005
|
SEVERE
|
Endpoint required to send message exchange.
Cause: Component code didn't
specify the required target endpoint for this message exchange.
Action: Try and determine
the component causing the exception and report a problem to Sun against
that component.
Resource Key: ADDR_NO_ENDPOINT
|
JBIMR0011
|
SEVERE
|
Can't find endpoint for service {0}
Cause: The requested service
name could not be translated into an known endpoint name.
Action: This is typically
one of the following problems:
-
A misconfiguration issue with a WSDL service description.
Check to see if this service name corresponds to something that is
should have been created by some component.
-
The component providing this service has not started.
Determine the component that should provide this service and check
that it is running and is configured to advertise this service.
-
The component providing the service has been shutdown
or the whole JBI installation is shutting down. These types of errors
are possible during the shutdown process.
Resource Key: CANT_FIND_ENDPOINT_FOR_SERVICE
|
JBIMR0012
|
SEVERE
|
Endpoint has been deactivated. Service({0}) Endpoint({1})
Cause: The endpoint has been
deactivated by the owning component.
Action: This could be the
type of error that can happen when a component or the JBI runtime
is being shutdown. It can also be a problem in the implementation
of a component. If no other shutdown messages occur in the log then
file a problem to Sun with the component that logged this error.
Resource Key: INACTIVE_ENDPOINT
|
JBIMR0014
|
SEVERE
|
Invalid message exchange pattern URI. Pattern({0})
Cause: Component requested
a Message Exchange Pattern not supported by this runtime.
Action: The set of legal
Message Exchange Patterns is relatively static. This likely means
there is a problem with the component that is getting this error.
Report a problem to Sun against the component.
Resource Key: INVALID_MEP_URI
|
JBIMR0017
|
SEVERE
|
The destination channel for this exchange is invalid or has
been deactivated.
Cause: The endpoint target
for this message is a component which is not active.
Action: This is a typical
condition that can result when a component is shutdown while other
components are using it. If this is not the case than report a problem
to Sun against the JBI NMR runtime.
Resource Key: INVALID_DESTINATION
|
JBIMR0018
|
SEVERE
|
Fault not supported in exchange pattern({0}).
Cause: A component either
attempted to create a fault or to set a fault on a Message Exchange
and the current state of the Message Exchange doesn't allow this operation.
Action: Report a problem
to Sun against the component that received this error.
Resource Key: FAULT_NOT_SUPPORTED
|
JBIMR0021
|
SEVERE
|
Attempt to perform operation inconsistent with exchange pattern.
Pattern({0}) {1}-State({2}).
Cause: Component attempted
to set the status or set a message on a Message Exchange and that
action is not allowed by the Message Exchange Pattern.
Action: Report a problem
to Sun against the component that received this error.
Resource Key: PATTERN_INCONSISTENT
|
JBIMR0022
|
WARNING
|
Operation unavailable - DeliveryChannel has been closed.
Cause: The Delivery Channel
is closed. No operations are allowed.
Action: This is a frequent
error to see when a component is shutting down. If this error observed
and is not related to a shutdown situation, a problem with the OpenESB
runtime and/or the component should be reported to Sun.
Resource Key: CHANNEL_CLOSED
|
JBIMR0023
|
SEVERE
|
Send operation not legal in current state. Pattern({0}) State({1})
Cause: A component attempted
a SEND operation which isn't allowed in the current state.
Action: Report this as a
problem to Sun against the component that received the error. This
exception can happen during shutdown of a component, and would be
considered normal in that case.
Resource Key: SEND_NOT_LEGAL
|
JBIMR0024
|
SEVERE
|
SendSynch operation not legal in current state. Pattern ({0})
{1}-State({2})
Cause: A component attempted
a SEND_SYNCH operation which isn't allowed in the current state.
Action: Report this as a
problem to Sun against the component that received the error. This
exception can happen during shutdown of a component, and would be
considered normal in that case.
Resource Key: SENDSYNCH_NOT_LEGAL
|
JBIMR0025
|
SEVERE
|
Unexpected illegal state change. Pattern ({0}) {1}-State ({2})
Cause: A component attempted
an operation that was allowed by the current state of the Message
Exchange.
Action: Report this as a
problem to Sun against the component that received this exception.
This exception is possible when a component is shutting down.
Resource Key: ILLEGAL_STATE_CHANGE
|
JBIMR0026
|
SEVERE
|
Error occurred getting default transaction from Transaction
manager.
Cause: A component requested
that a Message Exchange be associated with a transaction, but the
JBI NMR couldn't create a default transaction.
Action: The GlassFish transaction
support is either disabled or not functioning correctly. Check your
GlassFish configuration before reporting this problem to Sun.
Resource Key: CANT_GET_DEFAULT_TRANSACTION
|
JBIMR0027
|
SEVERE
|
Error attempting to suspend transaction.
Cause: Unexpected error from
GlassFish transaction manager.
Action: If nothing can be
found that points at the problem, report a problem to Sun against
the GlassFish transaction manager used by OpenESB.
Resource Key: CANT_SUSPEND
|
JBIMR0028
|
SEVERE
|
Transaction has not been suspended before send().
Cause: A component performed
a SEND operation but didn't suspend the transaction associated with
the sending thread.
Action: Report this as a
problem against the component getting the exception.
Resource Key: MUST_SUSPEND
|
JBIMR0029
|
SEVERE
|
Error attempting to resume transaction.
Cause: Unexpected error
from GlassFish transaction manager.
Action: If nothing can be
found that points at the problem, report a problem to Sun against
the GlassFish transaction manager used by OpenESB.
Resource Key: CANT_RESUME
|
JBIMR0030
|
SEVERE
|
Error attempting to resume invalid transaction.
Cause: Unexpected error from
GlassFish transaction manager.
Action: Report an problem
to Sun with the GlassFish transaction manager or OpenESB.
Resource Key: CANT_RESUME_INVALID
|
JBIMR0032
|
SEVERE
|
Deactivation failed - endpoint can only be deactived by component
which activated it.
Cause: A component attempted
to deactivate an endpoint it didn't own.
Action: Report this as a
problem to Sun against the component getting the exception.
Resource Key: DEACTIVATE_NOT_OWNER
|
JBIMR0033
|
SEVERE
|
Activated service name or endpoint name must not be null or
empty.
Cause: A component attempted
to active an endpoint with a null value or an empty name.
Action: Report this as a
problem against the component receiving the exception.
Resource Key: ACTIVATE_NOT_NULL
|
JBIMR0034
|
SEVERE
|
Endpoint ({0}) has already been activated by component {1}.
Cause: A component attempted
to activated an endpoint that was already active by another component.
Action: This is typically
a problem with the configuration of a component. If not, report this
problem to Sun against the component getting the exception.
Resource Key: DUPLICATE_ENDPOINT
|
JBIMR0035
|
WARNING
|
Message Exchange timed out.
Cause: A Message Exchange
ACCEPT actions timed out instead of completing.
Action: Normal exception
when timeouts are used. Report an problem to Sun against the component
if the error seems to be happening when not expected.
Resource Key: MESSAGE_TIMEOUT
|
JBIMR0036
|
SEVERE
|
Error occurred importing WSDL for service {0} : {1}
Cause: A component gave the
JBI NMR an incorrectly formatted description of the service.
Action: Report a problem
to Sun against the component that created the service. It likely isn't
the component that receives this exception.
Resource Key: WSDL_IMPORT_ERROR
|
JBIMR0038
|
SEVERE
|
Service connection already exists for interface {0}
Cause: A Service Assembly
was deployed that created an interface connection that already exists.
Action: Determine the conflicting
Service Assemblies and correct the interface names.
Resource Key: INTERFACE_CONNECTION_EXISTS
|
JBIMR0039
|
SEVERE
|
Service connection already exists for endpoint {0} {1} owned
by component {2}
Cause: A Service Assembly
was deployed that created an service connection that already exists.
Action: Determine the conflicting
Service Assemblies and correct the service names.
Resource Key: ENDPOINT_CONNECTION_EXISTS
|
JBIMR0040
|
SEVERE
|
Component did not return a descriptor for endpoint {0}
Cause: A component requested
an Message Exchange to be created targeting a particular operation
for a service. This operation could not be found in the endpoint description
returned by the owning component.
Action: This is commonly
a configuration issue where the abstract WSDL given to a client does
not match with the concrete WSDL given to a service. Look at the service
description and usages of the service. Can occasionally be a problem
with the component that owns the service. In this case report a problem
to Sun against the owning component.
Resource Key: ENDPOINT_NO_DESCRIPTOR
|
JBIMR0041
|
SEVERE
|
Operation {0} was not found in service {1}
Cause: A component requested
a Message Exchange to be created targeting a particular service. No
operation information was returned in the service description returned
by the owning component.
Action: This is commonly
a configuration issue where the abstract WSDL given to a client does
not match with the concrete WSDL given to a service. Look at the service
description and usages of the service. Can occasionally be a problem
with the component that owns the service. In this case report a problem
to Sun against the owning component.
Resource Key: NONEXISTENT_OPERATION
|
JBIMR0042
|
SEVERE
|
Can't find endpoint for interface {0}
Cause: The requested interface
name could not be translated into an known endpoint name.
Action: This is typically
one of the following problems:
-
A misconfiguration issue with a WSDL service description.
Check to see if this interface name corresponds to something that
is should have been created by some component.
-
The component providing this interface has not started.
Determine the component that should provide this interface and check
that it is running and is configured to advertise this interface.
-
The component providing the interface has been shutdown
or the whole JBI installation is shutting down. These types of errors
are possible during the shutdown process.
Resource Key: CANT_FIND_ENDPOINT_FOR_INTERFACE
|
JBIMR0043
|
SEVERE
|
Unable to match required capabilities to available service endpoint
Cause: A Message Exchange
was targeted at any instance of a particular service. No service instance
was found that both the consumer and provider could agree on.
Action: Typically this points
at a problem with the configuration of a consumer or provider component.
This is a rarely used feature, thus it requires detailed investigation
of the components involved. It may require reporting a problem to
Sun against both components.
Resource Key: CAPABILITY_NO_MATCH
|
JBIMR0044
|
SEVERE
|
Unable to locate activated endpoint for service connection {0}
{1}.
Cause: A component attempted
to send to a logical service endpoint, but no physical instance of
the endpoint currently exists.
Action: This typically means
one of two things: 1) The component that should create the physical
instance of the service endpoint is not running or hasn't completed
startup processing. This is typically resolved by starting the components
in a different order or restarting a failed component. 2) There is
a configuration problem with the component that should create the
physical instance. This is typically resolved by looking at the Service
Assembly descriptor.
Resource Key: SERVICE_CONNECTION_NO_ENDPOINT
|
JBIMR0045
|
SEVERE
|
Endpoint addresses can't be an External endpoint: {0} {1}
Cause: A component addressed
a MessageExchange with an External Endpoint. External Endpoints are
only used by binding components (like the HTTP Binding Component)
for their internal needs. They can't be used as a Message Exchange
target.
Action: Report a problem
to Sun against the component that received this exception.
Resource Key: EXTERNAL_ENDPOINT_NOT_VALID
|