Post Transfer Raw
Commands
|
Specifies the FTP raw commands to be used directly after the file-transfer
command. For example, some SITE commands use a ; (semi-colon) to separate
the command set, as displayed in this example:
SITE RECFM=FB;SITE LRECL=50;SITE BLOCKSIZE=32750;SITE
|
TRACKS;SITE PRI=5;SITE SEC=5
|
These commands are sent one by one, in the sequence they are listed.
Note –
Certain combinations of post-transfer raw commands can cause the
loss of data if there is a failure on the FTP server. For example, if the
inbound post-transfer command is Delete ,
and your post-transfer raw commands fail, the deleted file is not recoverable.
|
One or more valid FTP raw commands.
Note –
These commands are sent to the FTP server directly and are not
interpreted by the adapter in any way.
|
Pre Transfer Raw Commands
|
Specifies the FTP raw commands to be used directly before the
file-transfer command. For example, some SITE commands use a ; (semi-colon)
to separate the command set:
SITE RECFM=FB;SITE LRECL=50;SITE BLOCKSIZE=32750;SITE
|
TRACKS;SITE PRI=5;SITE SEC=5
|
These commands are sent one by one, in the sequence they are listed.
|
One or more valid FTP raw commands.
Note –
These commands are sent to the FTP server directly and are not
interpreted by the adapter in any way.
|