Sun Java System Application Server Enterprise Edition 8.2 Performance Tuning Guide

Tuning HADB

The Application Server uses the high-availability database (HADB) to store persistent session state data. To optimize performance, tune the HADB according to the load of the Application Server. The data volume, transaction frequency, and size of each transaction can affect the performance of the HADB, and consequently the performance of Application Server.

This section discusses following topics:

Disk Use

This section discusses how to calculate HADB data device size and explains the use of separate disks for multiple data devices.

Calculating HADB Data Device Size

When the HADB database is created, specify the number, and size of each data device. These devices must have room for all the user data to be stored. In addition, allocate extra space to account for internal overhead as discussed in the following section.

If the database runs out of device space, the HADB returns error codes 4593 or 4592 to the Application Server.

Note –

See Sun Java System Application Server Enterprise Edition 8.2 Error Message Reference for more information on these error messages.

HADB also writes these error messages to history files. In this case, HADB blocks any client requests to insert, or update data. However, it will accept delete operations.

HADB stores session states as binary data. It serializes the session state and stores it as a BLOB (binary large object). It splits each BLOB into chunks of approximately 7KB each and stores each chunk as a database row (context row is synonymous with tuple, or record) in pages of 16KB.

There is some small memory overhead for each row (approximately 30 bytes). With the most compact allocation of rows (BLOB chunks), two rows are stored in a page. Internal fragmentation can result in each page containing only one row. On average, 50% of each page contains user data.

For availability in case of node failure, HADB always replicates user data. An HADB node stores its own data, plus a copy of the data from its mirror node. Hence, all data is stored twice. Since 50% of the space on a node is user data (on average), and each node is mirrored, the data devices must have space for at least four times the volume of the user data.

In the case of data refragmentation, HADB keeps both the old and the new versions of a table while the refragmentation operation is running. All application requests are performed on the old table while the new table is being created. Assuming that the database is primarily used for one huge table containing BLOB data for session states, this means the device space requirement must be multiplied by another factor of two. Consequently, if you add nodes to a running database, and want to refragment the data to use all nodes, you must have eight times the volume of user data available.

Additionally, you must also account for the device space that HADB reserves for its internal use (four times that of the LogBufferSize). HADB uses this disk space for temporary storage of the log buffer during high load conditions.

Tuning Data Device Size

To increase the size of the HADB data devices, use the following command:

hadbm set TotalDatadeviceSizePerNode

This command restarts all the nodes, one by one, to apply the change. For more information on using this command, seeConfiguring HADB in Sun Java System Application Server Enterprise Edition 8.2 High Availability Administration Guide.

Note –

hadbm does not add data devices to a running database instance.

Placing HADB files on Physical Disks

For best performance, data devices should be allocated on separate physical disks. This applies if there are nodes with more than one data device, or if there are multiple nodes on the same host.

Place devices belonging to different nodes on different devices. Doing this is especially important for Red Hat AS 2.1, because HADB nodes have been observed to wait for asynchronous I/O when the same disk is used for devices belonging to more than one node.

An HADB node writes information, warnings, and errors to the history file synchronously, rather than asynchronously, as output devices normally do. Therefore, HADB behavior and performance can be affected any time the disk waits when writing to the history file. This situation is indicated by the following message in the history file:

BEWARE - last flush/fputs took too long

To avoid this problem, keep the HADB executable files and the history files on physical disks different from those of the data devices.

Memory Allocation

It is essential to allocate sufficient memory for HADB, especially when it is co-located with other processes.

The HADB Node Supervisor Process (NSUP) tracks the time elapsed since the last time it performed monitoring. If the time exceeds a specified maximum (2500 ms, by default), NSUP restarts the node. The situation is likely when there are other processes in the system that compete for memory, causing swapping and multiple page faults. When the blocked node restarts, all active transactions on that node are aborted.

If Application Server throughput slows and requests abort or time out, make sure that swapping is not the cause. To monitor swapping activity on Unix systems, use this command:

vmstat -S

In addition, look for this message in the HADB history files. It is written when the HADB node is restarted, where M is greater than N:

Process blocked for .M. sec, max block time is .N. sec

The presence of aborted transactions will be signaled by the error message

HADB00224: Transaction timed out or HADB00208: Transaction aborted.


For best performance, all HADB processes (clu_xxx_srv) must fit in physical memory. They should not be paged or swapped. The same applies for shared memory segments in use.

You can configure the size of some of the shared memory segments. If these segments are too small, performance suffers, and user transactions are delayed or even aborted. If the segments are too large, then the physical memory is wasted.

You can configure the following parameters:


The HADB stores data on data devices, which are allocated on disks. The data must be in the main memory before it can be processed. The HADB node allocates a portion of shared memory for this purpose. If the allocated database buffer is small compared to the data being processed, then disk I/O will waste significant processing capacity. In a system with write-intensive operations (for example, frequently updated session states), the database buffer must be big enough that the processing capacity used for disk I/O does not hamper request processing.

The database buffer is similar to a cache in a file system. For good performance, the cache must be used as much as possible, so there is no need to wait for a disk read operation. The best performance is when the entire database contents fits in the database buffer. However, in most cases, this is not feasible. Aim to have the “working set” of the client applications in the buffer.

Also monitor the disk I/O. If HADB performs many disk read operations, this means that the database is low on buffer space. The database buffer is partitioned into blocks of size 16KB, the same block size used on the disk. HADB schedules multiple blocks for reading and writing in one I/O operation.

Use the hadbm deviceinfo command to monitor disk use. For example, hadbm deviceinfo --details will produce output similar to this:

NodeNo   TotalSize       FreeSize        Usage
0        512             504             1%
1        512             504             1%

The columns in the output are:

Tuning DataBufferPoolSize

To change the size of the database buffer, use the following command:

hadbm set DataBufferPoolSize

This command restarts all the nodes, one by one, for the change to take effect. For more information on using this command, see Configuring HADB in Sun Java System Application Server Enterprise Edition 8.2 High Availability Administration Guide.


Before it executes them, HADB logs all operations that modify the database, such as inserting, deleting, updating, or reading data. It places log records describing the operations in a portion of shared memory referred to as the (tuple) log buffer. HADB uses these log records for undoing operations when transactions are aborted, for recovery in case of node crash, and for replication between mirror nodes.

The log records remain in the buffer until they are processed locally and shipped to the mirror node. The log records are kept until the outcome (commit or abort) of the transaction is certain. If the HADB node runs low on tuple log, the user transactions are delayed, and possibly timed out.

Tuning LogBufferSize

Begin with the default value. Look for HIGH LOAD informational messages in the history files. All the relevant messages will contain tuple log or simply log, and a description of the internal resource contention that occurred.

Under normal operation the log is reported as 70 to 80% full. This is because space reclamation is said to be “lazy.” HADB requires as much data in the log as possible, to recover from a possible node crash.

Use the following command to display information on log buffer size and use:

hadbm resourceinfo --logbuf

For example, output might look like this:

Node No.     Avail         Free Size
0            44            42
1            44            42

The columns in the output are:


The node internal log (nilog) contains information about physical (as opposed to logical, row level) operations at the local node. For example, it provides information on whether there are disk block allocations and deallocations, and B-tree block splits. This buffer is maintained in shared memory, and is also checked to disk (a separate log device) at regular intervals. The page size of this buffer, and the associated data device is 4096 bytes.

Large BLOBs necessarily allocate many disk blocks, and thus create a high load on the node internal log. This is normally not a problem, since each entry in the nilog is small.

Tuning InternalLogbufferSize

Begin with the default value. Look out for HIGH LOAD informational messages in the history files. The relevant messages contain nilog, and a description of the internal resource contention that occurred.

Use the following command to display node internal log buffer information:

hadbm resourceinfo --nilogbuf

For example, the output might look something like this:

Node No.     Avail         Free Size
0            11            11
1            11            11

To change the size of the nilog buffer, use the following command:

hadbm set InternalLogbufferSize

The hadbm restarts all the nodes, one by one, for the change to take effect. For more information on using this command, see Configuring HADB in Sun Java System Application Server Enterprise Edition 8.2 High Availability Administration Guide.

Note –

If the size of the nilog buffer is changed, the associated log device (located in the same directory as the data devices) also changes. The size of the internal log buffer must be equal to the size of the internal log device. The command hadbm set InternalLogBufferSize ensures this requirement. It stops a node, increases the InternalLogBufferSize, re initializes the internal log device, and brings up the node. This sequence is performed on all nodes.


Each row level operation requires a lock in the database. Locks are held until a transaction commits or rolls back. Locks are set at the row (BLOB chunk) level, which means that a large session state requires many locks. Locks are needed for both primary, and mirror node operations. Hence, a BLOB operation allocates the same number of locks on two HADB nodes.

When a table refragmentation is performed, HADB needs extra lock resources. Thus, ordinary user transactions can only acquire half of the locks allocated.

If the HADB node has no lock objects available, errors are written to the log file. For more information , see Chapter 14, HADB Error Messages, in Sun Java System Application Server Enterprise Edition 8.2 Error Message Reference.

Calculating the number of locks

To calculate the number of locks needed, estimate the following parameters:

Note –

Locks are held for both primary records and hot-standby records. Hence, for insert, update and delete operations a transaction will need twice as many locks as the number of records. Read operations need locks only on the primary records. During refragmentation and creation of secondary indices, log records for the involved table are also sent to the fragment replicas being created. In that case, a transaction needs four times as many locks as the number of involved records. (Assuming all queries are for the affected table.)


If refragmentation is performed, the number of locks to be configured is:

Nlocks = 4x (y/7000 + 2) = 2xy/3500 + 2x

Otherwise, the number of locks to be configured is:

Nlocks = 2x (y/7000 + 2) = xy/3500 + 4x

Tuning NumberOfLocks

Start with the default value. Look for exceptions with the indicated error codes in the Application Server log files. Remember that under normal operations (no ongoing refragmentation) only half of the locks might be acquired by the client application.

To get information on allocated locks and locks in use, use the following command:

hadbm resourceinfo --locks

For example, the output displayed by this command might look something like this:

Node No.     Avail             Free            Waits
0            50000             50000           na
1            50000             50000           na


This section describes some of the timeout values that affect performance.

JDBC connection pool timeouts

These values govern how much time the server waits for a connection from the pool before it times out. In most cases, the default values work well. For detailed tuning information, see Tuning JDBC Connection Pools.

Load Balancer timeouts

Some values that may affect performance are:

For more information on configuring the load balancer plug-in, see Configuring the Load Balancer in Sun Java System Application Server Enterprise Edition 8.2 High Availability Administration Guide.

HADB timeouts

The sql_client time out value may affect performance.

Operating System Configuration

The following section describes configuration of the operating system.


If the number of semaphores is too low, HADB can fail and display this error message:

No space left on device

This can occur either while starting the database, or during run time. Since the semaphores are provided as a global resource by the operating system, the configuration depends on all processes running on the host, and not the HADB alone. In Solaris, configure the semaphore settings by editing the /etc/system file.

To run the nodes, NNODES (the number of nodes submitted implicitly by --hosts option to the HADB) and NCONNS connections (HADB configuration parameter NumberOfSessions, default value being 100) per host, use the following semaphore settings:

set semsys:seminfo_semmap = <default=10> + NNODES
set semsys:seminfo_semmni = <default=10> + NNODES
set semsys:seminfo_semmns = <default=60> + (NNODES * 8)
set semsys:seminfo_semmnu = <default=30> + NNODES + NCONNS

If you plan to run multiple nodes per host, make sure semmap = NNODES. Use the sysinfo and sysdef commands to inspect the settings.

Shared Memory

Set the maximum shared memory size to the total amount of physical RAM. Additionally, set the maximum number of shared memory segments per process to six or more to accommodate the HADB processes. Set the number of system-wide, shared memory identifiers based on the number of nodes running on the host.


In Solaris 9, because of the kernel changes, the hmsys:shminfo_shmseg variable is obsolete. In Solaris 8, add the following settings to the /etc/system file:

set shmsys:shminfo_shmmax = 0xffffffff
set shmsys:shminfo_shmseg = <default=6>
set shmsys:shminfo_shmmni = <default=100> + (6 * NNODES)

Default values are for Solaris 8. Add HADB resource requirements to the previous value of the variables regardless of whether they are the default values.

Note –

You must reboot the host after changing these settings.


To increase the shared memory to 512 MB, run the following commands:

echo 536870912 > /proc/sys/kernel/shmmax
echo 536870912 > /proc/sys/kernel/shmall

Where the file shmmax contains the maximum size of a single shared memory segment, and shmall contains the total shared memory to be made available.

This value is large enough for a standard HADB node that uses default values. If the default values are changed, consider changing these values, as well.

To make these changes permanent, add those lines to /etc/rc.local on your Linux machine. With Redhat Linux, you can also modify sysctl.conf to set the kernel parameters.