Skip Navigation Links | |
Exit Print View | |
SPARC Enterprise M3000/M4000/M5000/ M8000/M9000 Servers Product Notes for XCP Version 1112 |
Hardware, Firmware, and Software Compatibility
Obtaining Oracle Solaris Patches
2. Information About XCP 1112 Firmware
Mandatory Upgrade to XCP Version 1112
XCP Support for RAID-Capable IOUA Cards in M8000/M9000 Servers
Updating the OpenBoot PROM Firmware
Upgrading From a Version Earlier Than XCP 1050
Upgrading an M8000/M9000 Server From a Version Earlier Than XCP 1082
Domain Restart Required After Certain Type of XCP Upgrade
XCP Functionality Issues and Limitations
XCP Known Issues (CRs) and Workarounds
Sun Flash Accelerator F20 PCIe Card
Identifying Degraded Memory in a System
To Identify Degraded Memory in a System
Enabling the Web Console SMF Service
To Enable the Web Console SMF Service
Software Functionality Issues and Limitations
Oracle Solaris OS Issues (CRs) and Workarounds
Known Issues in All Supported Oracle Solaris Releases
Issues Fixed in Oracle Solaris 10 8/11
Issues Fixed in Oracle Solaris 10 9/10
Issues Fixed in Oracle Solaris 10 10/09
Issues Fixed in Oracle Solaris 10 5/09
Issues Fixed in Oracle Solaris 10 10/08
Issues Fixed in Oracle Solaris 10 5/08
Issues Fixed in Oracle Solaris 10 8/07
Software Documentation Updates
Important Notes, Issues and Workarounds – All M-Series Servers
Booting From a WAN Boot Server
Booting Multiple Systems From a Single J4200 JBOD Storage Array
Notes on the Use of USB Memory
Hardware Functionality Issues and Limitations
Important Notes, Issues and Workarounds – M3000 Servers Only
Important Notes, Issues and Workarounds – M4000/M5000 and M8000/M9000 Servers Only
Warning Label on M9000 Server AC Section
Sun Crypto Accelerator 6000 Cards
Patches for Emulex PCI Express (PCIe) Cards
Hardware Functionality Issues and Limitations
Hardware Documentation Updates for the M3000 Server
The following Emulex cards require drivers supplied in patch 120222-27:
XSEFC402AF Sun StorageTek Enterprise Class 4-Gigabit Dual-Port Fiber Channel PCIe HBA
XSEFC401AF Sun StorageTek Enterprise Class 4-Gigabit Single-Port Fiber Channel PCIe HBA
This section describes known issues in this release.
For power-on after power-off, wait at least 30 seconds before turning the system power back on by using the main line switch or the circuit breakers on the distribution panel.
For servers that have the B-type plug, confirm that a 15A overcurrent protection device is available outside the server. If one is not available, prepare an external 15A overcurrent protection that can be achieved by means of no-fuse breakers (NFBs) or fuses. The B-type plug refers to plugs other than grounding-type ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15.
Connecting a SAS device containing multiple SAS targets to the onboard external SAS interface is not supported. Instead, use a Sun StorageTek Host Bus Adaptor (SG-XPCIE8SAS-E-Z).