1. Overview of the Oracle VM Server for SPARC Software
2. Installing and Enabling Software
4. Setting Up Services and the Control Domain
12. Performing Other Administration Tasks
File Names (file) and Variable Names (var-name)
Virtual Disk Server backend and Virtual Switch Device Names
Configuration Name (config-name)
Connecting to a Guest Console Over a Network
Stopping a Heavily Loaded Domain Can Time Out
Operating the Oracle Solaris OS With Oracle VM Server for SPARC
OpenBoot Firmware Not Available After Oracle Solaris OS Has Started
Save Your Current Domain Configurations to the SP
Do Not Use the psradm(1M) Command on Active CPUs in a Power-Managed Domain
Result of Oracle Solaris OS Breaks
Results From Halting or Rebooting the Control Domain
Using Logical Domains With the Service Processor
Reset the Domain Configuration to the Default or Another Configuration
Configuring Domain Dependencies
Determining Where Errors Occur by Mapping CPU and Memory Addresses
Determine the Real Memory Address
Examples of CPU and Memory Mapping
Using Universally Unique Identifiers
Virtual Domain Information Command and API
A. Oracle VM Server for SPARC Physical-to-Virtual Conversion Tool
B. Oracle VM Server for SPARC Configuration Assistant
C. Logical Domains Manager Discovery
D. Using the XML Interface With the Logical Domains Manager
The virtual network terminal server daemon, vntsd(1M), enables you to provide access for multiple domain consoles using a single TCP port. At the time of domain creation, the Logical Domains Manager assigns a unique TCP port to each console by creating a new default group for that domain's console. The TCP port is then assigned to the console group as opposed to the console itself. The console can be bound to an existing group using the set-vcons subcommand.
The following example shows binding the console for three different domains (ldg1, ldg2, and ldg3) to the same console group (group1).
primary# ldm set-vcons group=group1 service=primary-vcc0 ldg1 primary# ldm set-vcons group=group1 service=primary-vcc0 ldg2 primary# ldm set-vcons group=group1 service=primary-vcc0 ldg3
# telnet localhost 5000 primary-vnts-group1: h, l, c{id}, n{name}, q:
You are prompted to select one of the domain consoles.
primary-vnts-group1: h, l, c{id}, n{name}, q: l DOMAIN ID DOMAIN NAME DOMAIN STATE 0 ldg1 online 1 ldg2 online 2 ldg3 online
Note - To re-assign the console to a different group or vcc instance, the domain must be unbound; that is, it has to be in the inactive state. Refer to the Oracle Solaris 10 OS vntsd(1M) man page for more information about configuring and using SMF to manage vntsd and using console groups.