NAME | SYNOPSIS | AVAILABILITY | DESCRIPTION | OPTIONS | USAGE | EXAMPLES | NOTES | SEE ALSO
SUNWvts
vtsprobe is a utility that displays the device and configuration information contained in the SunVTS kernel. The output includes the SunVTS assigned group for the device, the device name, the device instance, the testname attached to this device, and the configuration information obtained from the device-specific test probe.
Specifies manufacturing mode, which displays the probe information in a format that is easy to read using script files.
Specifies the hostname to connect to and get the device and configuration information. If not specified, the current host will be used.
After the SunVTS kernel is up and running, you may type vtsprobe at the shell prompt to get the probe output. (See the sunvts (1M) man page for more information on how to start up SunVTS.
Running vtsprobe on a sun4m SPARCclassic produces the following output:
% vtsprobe
Processor(s)
system(systest)
System Configuration=sun4m SPARCclassic
System clock frequency=50 MHz
SBUS clock frequency=25 MHz
fpu(fputest)
Architecture=sparc
Type=TI TMS390S10 or TMS390S15 microSPARC chip
Memory
kmem(vmem)
Total: 143120KB
mem(pmem)
Physical Memory size=24 Mb
SCSI-Devices(esp0)
c0t2d0(rawtest)
Capacity: 638.35MB
Controller: esp0
Vendor: MICROP
SUN Id: 1588-15MBSUN0669
Firmware Rev: SN0C
Serial Number: 1588-15MB103
c0t2d0(fstest)
Controller: esp0
c0t3d0(rawtest)
Capacity: 404.65MB
Controller: esp0
Vendor: SEAGATE
SUN Id: ST1480 SUN0424
Firmware Rev: 8628
Serial Number: 00836508
c0t3d0(fstest)
Capacity: 404.65MB
Controller: esp0
Vendor: SEAGATE
SUN Id: ST1480 SUN0424
Firmware Rev: 8628
Serial Number: 00836508
c0t3d0(fstest)
Controller: esp0
c0t6d0(cdtest)
Controller: esp0
tape1(tapetest)
Drive Type: Exabyte EXB-8500 8mm Helical Scan
Network
isdn0(isdntest)
NT Port TE Port
le0(nettest)
Host_Name: ctech84
Host Address: 129.146.210.84
Host ID: 8001784b
Domain Name: scsict.Eng.Sun.COM
Comm.Ports
zs0(sptest)
Port a -- zs0 /dev/term/a : /devices/ ... a
Port b -- zs1 /dev/term/b : /devices/ ... b
Graphics
cgthree0(fbtest)
OtherDevices
bpp0(bpptest)
Logical name: bpp0
sound0(audio)
Audio Device Type: AMD79C30
sound1(audio)
Audio Device Type: DBRI Speakerbox
spd0(spdtest)
Logical name: spd0
|
The output of vtsprobe is highly dependent on the device being correctly configured into the system (so that a SunVTS probe for the device can be run successfully on it) and on the availability of a device-specific test probe.
If the device is improperly configured or if there is no probing function associated with this device, vtsprobe cannot print any information associated with it.
NAME | SYNOPSIS | AVAILABILITY | DESCRIPTION | OPTIONS | USAGE | EXAMPLES | NOTES | SEE ALSO