This table describes the enctest error messages, probable causes, and recommended actions.
Table 12-6 enctest Error Messages
|
Error Message |
Probable Cause(s) |
Recommended Action |
---|---|---|---|
8000 |
Failed to open device. |
System error. Cable loose or disconnected or device not configured. |
Verify the cable is properly connected and the device configured.Contact your authorized Sun service representative. |
8001 |
Failed to communicate with the enclosure |
System error. Cable loose or disconnected or device not configured. |
Verify the cable is properly connected and the device configured.Contact your authorized Sun service representative. |
8002 |
Cannot proceed further due to lack of memory |
Heavy system load. |
Please try later. |
8003 |
unrecoverable|critical|non-critical informational condition detected in the enclosure |
|
|
8004 |
Failed to obtain list of enclosure elements |
System error |
Contact your authorized Sun service representative. |
8005 |
Failed to obtain status of an enclosure element |
System error |
Contact your authorized Sun service representative. |
8006 |
Failed to set the status of an enclosure element |
System error |
Contact your authorized Sun service representative. |