|
Error Message |
Probable Cause(s) |
Recommended Action |
---|---|---|---|
6000 |
Mailbox loopback failed |
FC_AL board, System software. |
Replace FC_AL board. If the problem persists, contact your authorized Sun service provider. |
6001 |
Error parsing command line options |
Error in command line. |
Check your command line and re-enter it if necessary. |
6002 |
Can not associate device with string. |
New hardware added since VTS probe or system software. |
Stop all testing and re-probe. If the problem persists, contact your authorized Sun service provider. |
6003 |
FW Stop command returned data, expected 0. |
IFP Firmware or a system software. |
Reload IFP firmware. If the problem persists, contact your authorized Sun service provider. |
6004 |
Command #data (cmd=value) did not successfully complete, status: Obs 0xvalue, Exp 0xvalue |
IFP Firmware or a system software.
|
Reload IFP firmware. If the problem persists, contact your authorized Sun service provider. |
6005 |
Chained command number data failed to complete. |
IFP Firmware or a system software.
|
Reload IFP firmware. If the problem persists, contact your authorized Sun service provider. |
6006 |
data errors were observed during this cycle. |
|
|
6007 |
Command chain aborted: data commands queued, data commands run |
|
|
6008 |
Command Issued: mbox[0]=0xvalue, mbox[1]=0xvalue, mbox[2]=0xvalue, mbox[3]=0xvalue, mbox[4]=0xvalue, mbox[5]=0xvalue, mbox[6]=0xvalue, mbox[7]=0xvalue |
|
|
6009 |
Result Mboxes: mbox[0]=0xvalue, mbox[1]=0xvalue, mbox[2]=0xvalue, mbox[3]=0xvalue, mbox[4]=0xvalue, mbox[5]=0xvalue, mbox[6]=0xvalue, mbox[7]=0xvalue |
|
|
6010 |
HCCR=0xvalue, BUS_SEMA=0xvalue, ISR=0xvalue, ICR=0xvalue, CDMA_COUNT=0xvalue, CDMA_ADDR=0xvalue |
|
|
6011 |
CDMA_STATUS=0xvalue, CDMA_CONTROL=0xvalue, RDMA_COUNT=0xvalue, RDMA_ADDR=0xvalue, RDMA_STATUS=0xvalue, RDMA_CONTROL=0xvalue |
|
|
6012 |
TDMA_COUNT=0xvalue, TDMA_ADDR=0xvalue, TDMA_STATUS=0xvalue, TDMA_CONTROL=0xvalue, RISC_PSR=0xvalue, RISC_IVR=0xvalue |
|
|
6013 |
RISC_REGS: RR0=0xvalue, RR1=0xvalue, RR2=0xvalue, RR3=0xvalue, RR4=0xvalue, RR5=0xvalue, RR6=0xvalue, RR7=0xvalue |
|
|
6014 |
RISC_REGS: RR8=0xvalue, RR9=0xvalue, RR10=0xvalue, RR11=0xvalue, RR12=0xvalue, RR13=0xvalue, RR14=0xvalue, RR15=0xvalue |
|
|
6015 |
RISC_PCR=0xvalue, RISC_RAR0=0xvalue, RISC_RAR1=0xvalue, RISC_LCR=0xvalue, RISC_PC=0xvalue, RISC_SP=0xvalue |
|
|
6016 |
REQUEST_IN=0xvalue, REQUEST_OUT=0xvalue, RESPONSE_IN=0xvalue, RESPONSE_OUT=0xvalue |
|
|
6017 |
CURRENT_REQ_PTR=0xvalue, BASE_REQ_PTR=0xvalue, CURRENT_RESP_PTR=0xvalue, BASE_RESP_PTR=0xvalue |
|
|
6018 | Interface at string is currently not testable, there may be devices attached. | ||
6019 | Bad option passed to test: string | ||
6020 | No device detected for ifpdata | ||
6021 | Cannot associate an IFP device with string. | ||
6021 | No IFP devices detected on this system. | ||
8000 |
string: invalid file descriptor data passed in. |
Programming error or system software. |
If the problem persists, contact your authorized Sun service provider. |
8001 |
string: IOCTL call failed: string. |
wrong/missing IFP driver. |
Contact your system administrator to load correct driver. If the problem persists, contact your authorized Sun service provider. |
8002 |
string: Firmware checksum failed, Rec: value, Exp: 0x0 |
Unsupported or bad firmware loaded or bad ifp controller. |
Load the correct ifp driver. If the problem persists, contact your authorized Sun service provider. |
8003 |
string: Get Revision mailbox command failed, return code 0xvalue. |
Incorrect ifp firmware loaded or a system software problem. |
Load the correct ifp driver. If the problem persists, contact your authorized Sun service provider. |
8004 |
Bad device name passed to test: string | Wrong entry on command line. |
Check and retype the command line. If the problem persists, contact your authorized Sun service provider. |
8005 |
Bad option passed to test: string | Wrong entry on command line. | Check and retype the command line If the problem persists, contact your authorized Sun service provider. |
8006 | Open of IFP device string failed; string | System software problem. |
Contact your system administrator. If the problem persists, contact your authorized Sun service provider. |
8007 | Open of /etc/path_to_inst file failed; string | System software problem. |
Contact your system administrator. If the problem persists, contact your authorized Sun service provider. |
8008 | Get firmware revision IOCTL failed: string |
System software problem. |
Contact your system administrator. If the problem persists, contact your authorized Sun service provider. |
8009 | Device string is untestable, devices attached to loop | Devices attached to controller or a system software problem. | Remove interface connections and try again. |
8010 | Open ctrlr string as RDWR failed. Reason: string | Device name incorrect (command line only), or a system software problem. | Check and re-enter the command line. If the problem persists, contact your authorized Sun service provider. |
8011 | Device string is untestable, reason: string | Device name is incorrect (command line only), or the wrong driver is installed or a system software problem. | Check and re-enter the command line. Verify that the correct driver is installed. If problem persists, contact your authorized Sun service provider. |