/opt/SUNWvts/bin/rsctest standard_arguments -o enet=E/D,epattype=seq+rand,esize=packet_size, epkts=number_packets,target=IP_address,etest=I+E+P,flash=E/D,seeprom=E/D, serial=E/D,sdatsize=data_size,slb=I+E,spattype=seq+rand, stest=u_u+c_c+d_d
Table 27-3 rsctest Command Line Syntax
Argument |
Explanation |
---|---|
enet=enable|disable |
Enable or disables RSC Ethernet test. |
epattype=seq+rand |
Predefined pattern options used for enet test. |
esize=packet_size |
The data size for each packet in the enet test. |
epkts=number_packets |
The number of packets to send for enet test. |
target=IP_address |
IP Address of target system for enet ping test. |
etest=Internal+External+Ping |
Test modes for RSC enet test. |
flash=enable|disable |
Enables or disables RSC flash checksum test. |
seeprom=enable|disable |
Enables or disables RSC SEEPROM checksum test. |
serial=enable|disable |
Enables or disables RSC serial test. |
sdatsize=data_size |
Data size for the rsc serial tests. |
slb=Internal+External |
Loopback type. External N/A on ports c&d. |
spattype=seq+rand |
Predefined pattern options used for RSC serial test. |
stest=u_u+c_c+d_d |
Defines port and configuration to use for rsc serial test. |
64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".