SunVTS 3.0 Test Reference Manual

socaltest Error Messages

Table 32-3 socaltest Error Messages

Error Message 

Probable Cause(s) 

Recommended Action 

8000

Couldn't open device_name

SOC+ card not installed. 

Verify that the target SOC+ card is installed properly. 

8002

{SOC+ host adapter}--{host memory} loopback test failed!

Fault in DMA between host 

and SOC+ host adapter. 

Contact your authorized Sun service provider. 

8006

SOC+ host adapter external loopback test failed!

Loopback cable not connected. 

Connect loopback cable. 

OEC module faulty or not installed properly. 

Replace OEC module and retry. 

 

Contact your authorized Sun service provider. 

8009

SOC+ host adapter internal loopback test failed!

SOC+ host adapter is faulty or is not properly installed. 

Verify that the SOC+ host adapter is installed properly. 

Replace the host adapter and retry. 

Contact your authorized Sun service provider. 

8010

Failed ioctl ioctl_name

System error. 

Contact your authorized Sun service provider. 

8011

Host control buffer test failed

SOC+ host adapter is faulty. 

Replace the host adapter and retry. 

Contact your authorized Sun service provider. 

8012

SOC+ selftest fails

SOC+ host adapter is faulty. 

Replace the host adapter and retry. 

Contact your authorized Sun service provider. 

8013

XRAM test fails

SOC+ host adapter is faulty. 

Replace the host adapter and retry. 

Contact your authorized Sun service provider. 

8015 

Loopback frame test failed Mismatch in looped back frame Expected: value

Observed: value