/opt/SUNWvts/bin/sxtest standard_arguments -o dev=device_name, lock=E(nable)/D(isable),tm=to_module#,cmem=n,vram=n,md=XXX
Table 38-3 sxtest Command Line Syntax
Argument |
Explanation |
---|---|
dev=device_name |
Specifies the device_name to be tested. |
lock=E(nable)/D(isable) |
Enables/disables frame buffer locking. See "Testing Multiple Frame Buffers" in Chapter 3 of the SunVTS 3.0 User's Guide for details. Frame buffer locking is enabled by default on the window server running the OpenWindows software. |
tm=to_module# |
Specifies an ending module number; use these last four arguments to narrow sxtest to a specific test scope. |
cmem=0|4 |
Enables or disables the contiguous memory; choose either 1 to enable or 0 to disable. Note: You must choose disable (0) if your system is equipped with less then 4 Mbytes of contiguous memory. |
cgfourteen0=0|4|8 |
Enables or disables the video random access memory; choose 1 to enable or 0 to disable. |
md=vis+alu+... |
Selects which modules are tested in a pass. |
64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".