Defining the Current Status

The read-only parameters described in Table 3-2 explain the operational mode of the interface. These parameters define the current status.

Table 3-2 Read-Only Parameters Defining the Current Status


Parameter	Values	Description
`transceiver_inuse`	01	= Internal transceiver= External transceiver
`link_status`	01	Current link status= Link down= Link up
`link_speed`	01	Valid only if the link is up= 10 Mbps= 100 Mbps
`link_mode`	01	Valid only if the link is up= Half duplex= Full duplex