Table 3-8 describes the read-only link partner capabilities.
Table 3-8 Read-Only Link Partner CapabilitiesParameter | Values | Description |
---|---|---|
lp_autoneg_cap |
01 |
= No auto-negotiation = Auto-negotiation |
lp_100T4_cap |
01 |
= No 100BASE-T4= 100BASE-T4 |
lp_100fdx_cap |
01 |
= No100Mbit/sec full-duplex transmission= 100Mbit/sec full-duplex |
lp_100hdx_cap |
01 |
= No 100Mbit/sec half-duplex transmission= 100Mbit/sec half-duplex |
lp_10fdx_cap |
01 |
= No 10Mbit/sec full-duplex transmission= 10Mbit/sec full-duplex |
lp_10hdx_cap |
01 |
= No 10Mbit/sec half-duplex transmission= 10Mbit/sec half-duplex |
If the link partner is not capable of auto-negotiation (when lp_autoneg_cap is 0) the information described in Table 3-8 is not relevant and the parameter value = 0.
If the link partner is capable of auto-negotation (when lp_autoneg_cap is 1) then the speed and mode information is displayed when you use auto-negotiation and get the link partner capabilities.