Solaris 7 (Intel Platform Edition) Device Configuration Guide
- Previous: Preconfiguration Information
- Next: Symbios Logic (also NCR) 53C810, 53C810A, 53C815, 53C820, 53C825, 53C825A, 53C860, 53C875, 53C875J, 53C876, 53C895 HBAs
Configuration Procedure
-
Boot DOS from the diskette drive.
-
Insert a copy of the DPT Utility diskette in the diskette drive.
-
Type DPTFMT and press Enter.
-
Press Enter to begin, and again to continue.
-
Press <F3> to enter SCSI ID 0 and LUN 0, and press <F3> to continue.
-
Use the down arrow to select MS-DOS and PC DOS.
-
Press Enter to write out the drive geometry, and press Enter to reboot.
-
Insert the user copy diskette of the ECU (CF.EXE) containing the !DPTxxx.CFG files.
-
At the A:> prompt, type CFG and press Enter.
-
At the Viewer Edit Details screen, press Enter.
-
Press the down arrow to the DPT SCSI HBA to select parameters and set them as follows:
o Bus:
|
Enabled
|
o IDE Boot Address:
|
Primary
|
o Option ROM Address:
|
Default
|
o SCSI ID HBA:
|
Default 7
|
o WD1003:
|
Emulation off for both drive 0 and 1
|
-
Press <F10> to save your changes.
-
Insert a copy of the boot diskette.
-
Press Enter to reboot DOS.
- Previous: Preconfiguration Information
- Next: Symbios Logic (also NCR) 53C810, 53C810A, 53C815, 53C820, 53C825, 53C825A, 53C860, 53C875, 53C875J, 53C876, 53C895 HBAs
- © 2010, Oracle Corporation and/or its affiliates