Table 2-8 describes the read-only link partner capabilities.
Table 2-8 Read-Only Link Partner Capabilities
Parameter |
Values |
---|---|
lp_autoneg_cap |
0 = No auto-negotiation 1 = Auto-negotiation |
lp_100fdx_cap |
0 = No100 Mbit/sec full-duplex transmission 1 = 100Mbit/sec full-duplex |
lp_100hdx_cap |
0 = No 100 Mbit/sec half-duplex transmission 1 = 100 Mbit/sec half-duplex |
lp_10fdx_cap |
0 = No 10 Mbit/sec full-duplex transmission 1 = 10 Mbit/sec full-duplex |
lp_10hdx_cap |
0 = No 10 Mbit/sec half-duplex transmission 1 = 10 Mbit/sec half-duplex |
If the link partner is not capable of auto-negotiation (when lp_autoneg_cap is 0) the information described in Table 2-8 is not relevant and the parameter value = 0.
If the link partner is capable of auto-negotiation (when lp_autoneg_cap is 1), the speed and mode information are displayed when you use auto-negotiation and get the link partner capabilities.