How to Configure a SCSI Device

SCSI disk c1t4d0 provides an example of configuring a SCSI device.

Only SCSI attachment points are listed. The attachment points displayed on your system will depend on your system configuration.

1. Become superuser.

2. Identify the device to be configured.

   cfgadm -al Ap_Id Receptacle Occupant Condition c0 connected configured unknown c0::dsk/c0t0d0 connected configured unknown c0::rmt/0 connected configured unknown c1 connected configured unknown c1::dsk/c1t10d0 connected configured unknown c1::dsk/c1t4d0 connected unconfigured unknown

3. Configure a specific SCSI device.

   # cfgadm -c configure c1::dsk/c1t4d0

4. Verify the SCSI device is configured.

   # cfgadm -al Ap_Id Receptacle Occupant Condition c0 connected configured unknown c0::dsk/c0t0d0 connected configured unknown c0::rmt/0 connected configured unknown c1 connected configured unknown c1::dsk/c1t10d0 connected configured unknown c1::dsk/c1t4d0 connected configured unknown