This manual provides the following information:
Late-breaking news (this chapter)
End-of-support statements (Chapter 2)
Open issues (Chapter 3)
Sun(TM) Enterprise(TM) 10000 server issues (Chapter 4)
Sun Enterprise 3x00, 4x00, 5x00, and 6x00 server issues (Chapter 5)
This manual supplements the Solaris 7 11/99 Sun Hardware Platform Guide and the Solaris 7 11/99 Release Notes.
This section covers issues that were discovered after these release notes were printed.
The tcp_rexmit_interval_max parameter value shown in the example on page 9 of the SunFDDI6.0 on the Sun Enterprise 10000 Server document is incorrect. This value should be 60000 not 6000. The corrected example is shown below:
# ndd -set /dev/tcp tcp_rexmit_interval_max 60000
WorkShop 5 is included as try-and-buy in the Solaris media kits. There may be new patches recommended for WorkShop. These patches can be downloaded from:
http://access1.sun.com/workshop/.*
You may have received a Solaris(TM) Server Media Kit to upgrade systems to the Solaris 7 11/99 operating environment. Please note that your service contract entitles you to use only those products that apply to your original Solaris operating environment license.
If you are upgrading from an existing version of Solaris and have installed unbundled products, either from Sun or from a different company, you must ensure that all those products are supported on Solaris 7 11/99 prior to upgrading. Depending on the status of each unbundled product, you have three options for each unbundled product:
Verify that the existing version of the unbundled product is supported on the Solaris 7 11/99 operating environment.
Acquire and install a new version of the unbundled product, which is supported on the Solaris 7 11/99 operating environment. Note that in this case you may need to remove the previous version of the unbundled product prior to upgrading to the Solaris 7 11/99 operating environment. See the unbundled product documentation for more details.
Remove the unbundled product prior to upgrading to the Solaris 7 11/99 operating environment.
For additional information contact the supplier of the unbundled product or your service provider or go to:
http://sunsolve.sun.com/sunsolve/pubpatches/patches.html
Table 1-1 lists the documents available on the Supplement CD:
Table 1-1 Documents on the Supplement CD
Path |
Comment |
---|---|
Docs/HWPG/EOS.html |
List of future end-of-support peripheral products |
Docs/HWPG/HWPG_en.ps |
Solaris 7 11/99 Sun Hardware Platform Guide |
Docs/ShowMeTV1.3/UserGuide/UG_en.ps |
ShowMe TV 1.3 User's Guide |
Docs/README_en.html/ |
Readme file for Solaris 7 11/99 Sun Computer Systems Supplement CD |
Docs/E10K_SunFDDI/SunFDDI6e10k.ps | Information on using SunFDDI(TM) 6.0 on the Sun Enterprise 10000 system |
Docs/SSP3.2/ENTSSPREFMAN.ps | Man pages for SSP 3.2 |
Docs/SSP3.2/SSPinstall.ps | Installation manual for SSP 3.2 |
Docs/SSP3.2/ssp.ps | User manual for SSP 3.2 |
Docs/SunForum2.0/UserGuide/SunForumUserGuide.ps | User guide for SunForum 2.0 |
The _en indicates an English language document. Other languages may be indicated, depending on locale.
The Supplement CD also contains other documentation in AnswerBook(TM) packages and in man page packages. The documentation in AnswerBook packages can only be read through the AnswerBook2(TM) server software provided on the Solaris Documentation CD. Documents in the man page packages can only be read through the man command. Refer to the Solaris 7 11/99 Sun Hardware Platform Guide for details on installing these packages from the Supplement CD.
Some sun4u systems need to be updated to a higher level of OpenBoot(TM) firmware in the flash PROM before they can run the 64-bit mode of the Solaris 7 11/99 operating environment. Systems that can only run the 32-bit mode (such as those in the sun4c, sun4d, and sun4m platform groups) do not require updated firmware to run Solaris 7 11/99 software.
The only systems that may require this flash PROM update are the following:
Ultra(TM) 1
Ultra 2
Ultra 450 and Sun Enterprise 450
Sun Enterprise 3000, 4000, 5000, and 6000 systems
See the Solaris 7 11/99 Sun Hardware Platform Guide for instructions for determining whether your system needs a flash PROM update and for instructions on performing that update.
For the Ultra and Ultra 2 systems, an antistatic wrist strap may be required for the update. If you need a wriststrap, send e-mail to strap@eng.sun.com
This CD provides video clips that illustrate how to perform steps involving hardware that are part of the procedures for updating the Flash PROM on some sun4u systems.
The video clips on this CD can be accessed several ways. Some software products are present on this CD to facilitate viewing of the videos directly from the CD. Do not use the AnswerBook2 server software or the ShowMe TV software on this CD to install these products permanently on a system. Instead, use the Solaris 7 11/99 Documentation CD to install AnswerBook2 server software and use the Supplement CD to install ShowMe TV software.
The video clips on the Flash PROM Update Multimedia AnswerBook CD have English language audio tracks. The volume level for the audio tracks is set to minimum. If you want to hear the English language audio track, you must adjust the audio level.