To Install the Prestoserve Patch on an Ultra 2 System
If you installed the Prestoserve 2.4.2 software and are using an Ultra 2 platform (200MHz or 300MHz), you must take the following steps to provide compatibility:
-
Edit the /etc/system file by adding the following information:
set fas:fas_enable_sbus64 = 0
-
Reboot your system.
-
Use pkgadd to add the SUNWprsto package.
-
Add the Prestoserve patch (103043-08).
Note -
If the above steps are not followed, your Ultra 2 system may panic.