Ensure that you have completed the following tasks:
Read the guidelines and requirements in the following sections:
Set up the primary and secondary clusters as described in Connecting and Installing the Clusters.
Access nodeA as superuser.
nodeA is the first node of the primary cluster. For a reminder of which node is nodeA, see Figure 6–7.
Create a disk group on nodeA that contains four volumes: volume 1, vol01 through volume 4, vol04.
For information about configuring a disk group by using the VxVM software, see Chapter 4, SPARC: Installing and Configuring VERITAS Volume Manager.
Configure the disk group to create a disk device group.
nodeA# /usr/cluster/bin/scconf -a \ -D type=vxvm,name=devicegroup,nodelist=nodeA:nodeB |
The disk device group is called devicegroup.
Create the file system for the disk device group.
nodeA# /usr/sbin/newfs /dev/vx/rdsk/devicegroup/vol01 < /dev/null nodeA# /usr/sbin/newfs /dev/vx/rdsk/devicegroup/vol02 < /dev/null |
No file system is needed for vol03 or vol04, which are instead used as raw volumes.
Go to How to Configure a Disk Device Group on the Secondary Cluster.