test

Sun Cluster Software Installation Guide for Solaris OS

ProcedureHow to Install Cluster Control Panel Software on an Administrative Console

Note –

You are not required to use an administrative console. If you do not use an administrative console, perform administrative tasks from one designated node in the cluster.

This procedure describes how to install the Cluster Control Panel (CCP) software on an administrative console. The CCP provides a single interface from which to start the cconsole(1M), ctelnet(1M), and crlogin(1M) tools. Each of these tools provides a multiple-window connection to a set of nodes, as well as a common window. You can use the common window to send input to all nodes at one time.

You can use any desktop machine that runs the Solaris 8 or Solaris 9 OS as an administrative console. In addition, you can also use the administrative console as a documentation server. If you are using Sun Cluster on a SPARC based system, you can use the administrative console as a Sun Management Center console or server as well. See Sun Management Center documentation for information about how to install Sun Management Center software. See the Sun Cluster 3.1 8/05 Release Notes for Solaris OS for additional information about how to install Sun Cluster documentation.

Before You Begin

Ensure that a supported version of the Solaris OS and any Solaris patches are installed on the administrative console. All platforms require at least the End User Solaris Software Group.

Steps

  1. Become superuser on the administrative console.

  2. Insert the Sun Cluster 2 of 2 CD-ROM in the CD-ROM drive of the administrative console.

    If the volume management daemon vold(1M) is running and is configured to manage CD-ROM devices, the daemon automatically mounts the CD-ROM on the /cdrom/cdrom0/ directory.

  3. Change to the Solaris_arch/Product/sun_cluster/Solaris_ver/Packages/ directory, where arch is sparc or x86, and where ver is 8 for Solaris 8, 9 for Solaris 9, or 10 for Solaris 10 .


    # cd /cdrom/cdrom0/Solaris_arch/Product/sun_cluster/Solaris_ver/Packages/

  4. Install the SUNWccon package.


    # pkgadd -d . SUNWccon

  5. (Optional) Install the SUNWscman package.


    # pkgadd -d . SUNWscman

    When you install the SUNWscman package on the administrative console, you can view Sun Cluster man pages from the administrative console before you install Sun Cluster software on the cluster nodes.

  6. (Optional) Install the Sun Cluster documentation packages.

    Note –

    If you do not install the documentation on your administrative console, you can still view HTML or PDF documentation directly from the CD-ROM. Use a web browser to view the Solaris_arch/Product/sun_cluster/index.html file on the Sun Cluster 2 of 2 CD-ROM, where arch is sparc or x86.

    1. Determine whether the SUNWsdocs package is already installed on the administrative console.


      # pkginfo | grep SUNWsdocs
application SUNWsdocs     Documentation Navigation for Solaris 9

      If the SUNWsdocs package is not yet installed, you must install it before you install the documentation packages.

    2. Choose the Sun Cluster documentation packages to install.

      The following documentation collections are available in both HTML and PDF format:

      Collection Title 

      HTML Package Name 

      PDF Package Name 

      Sun Cluster 3.1 9/04 Software Collection for Solaris OS (SPARC Platform Edition) 

      SUNWscsdoc

      SUNWpscsdoc

      Sun Cluster 3.1 9/04 Software Collection for Solaris OS (x86 Platform Edition) 

      SUNWscxdoc

      SUNWpscxdoc

      Sun Cluster 3.x Hardware Collection for Solaris OS (SPARC Platform Edition) 

      SUNWschw

      SUNWpschw

      Sun Cluster 3.x Hardware Collection for Solaris OS (x86 Platform Edition) 

      SUNWscxhw

      SUNWpscxhw

      Sun Cluster 3.1 9/04 Reference Collection for Solaris OS 

      SUNWscref

      SUNWpscref

    3. Install the SUNWsdocs package, if not already installed, and your choice of Sun Cluster documentation packages.

      Note –

      All documentation packages have a dependency on the SUNWsdocs package. The SUNWsdocs package must exist on the system before you can successfully install a documentation package on that system.


      # pkgadd -d . SUNWsdocs pkg-list

  7. Change to a directory that does not reside on the CD-ROM and eject the CD-ROM.


    # eject cdrom

  8. Create an /etc/clusters file on the administrative console.

    Add your cluster name and the physical node name of each cluster node to the file.


    # vi /etc/clusters
clustername node1 node2

    See the /opt/SUNWcluster/bin/clusters(4) man page for details.

  9. Create an /etc/serialports file.

    Add an entry for each node in the cluster to the file. Specify the physical node name, the hostname of the console-access device, and the port number. Examples of a console-access device are a terminal concentrator (TC), a System Service Processor (SSP), and a Sun Fire system controller.


    # vi /etc/serialports
node1 ca-dev-hostname port
node2 ca-dev-hostname port
    node1, node2

    Physical names of the cluster nodes

    ca-dev-hostname

    Hostname of the console-access device

    port

    Serial port number

    Note these special instructions to create an /etc/serialports file:

    • For a Sun Fire 15000 system controller, use telnet(1) port number 23 for the serial port number of each entry.

    • For all other console-access devices, use the telnet serial port number, not the physical port number. To determine the telnet serial port number, add 5000 to the physical port number. For example, if a physical port number is 6, the telnet serial port number is 5006.

    • For Sun Enterprise 10000 servers, also see the /opt/SUNWcluster/bin/serialports(4) man page for details and special considerations.

  10. (Optional) For convenience, set the directory paths on the administrative console.

    1. Add the /opt/SUNWcluster/bin/ directory to the PATH.

    2. Add the /opt/SUNWcluster/man/ directory to the MANPATH.

    3. If you installed the SUNWscman package, also add the /usr/cluster/man/ directory to the MANPATH.

  11. Start the CCP utility.


    # /opt/SUNWcluster/bin/ccp &

    Click the cconsole, crlogin, or ctelnet button in the CCP window to launch that tool. Alternately, you can start any of these tools directly. For example, to start ctelnet, type the following command:


    # /opt/SUNWcluster/bin/ctelnet &

    See the procedure “How to Remotely Log In to Sun Cluster” in Beginning to Administer the Cluster in Sun Cluster System Administration Guide for Solaris OS for additional information about how to use the CCP utility. Also see the ccp(1M) man page.

Next Steps

Determine whether the Solaris OS is already installed to meet Sun Cluster software requirements.