The following list shows all component variables for the Sun IPMI target host. .
This list has been augmented to support the Sun Fire x2100, x4100, and x4200 systems. A new variable, device_type, is provided to enable you to specify the IPMI system type. This variable accepts the following values.
sunfirev20z
sunfirev40z
sunfirex2100
sunfirex4100
sunfirex4200
The variable prompts in the browser interface indicate whether a variable must not be set for a specific device type.
The new variable console_service specifies whether to disable console service on IPMI target hosts. The default value for this variable is true.
For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system.
Example: sunfire-v20z-host
Description: Virtual host name for the target system.
Default value: :[installPath]-target
Description: Optional description of the target.
Example: test v20z
Description: Mac address.
Example: 00:0E:0C:07:E9:31
Description: IP address.
Example: 10.42.42.77
Description: Network mask.
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86).
Default value: x86
Description: Kernel architecture (sun4u, i86pc).
Default value: i86pc
Description: Size of disk.
Example: 20GB
Description: Default router to use for network connectivity
Example:10.42.42.1
Description: Default router IP address for Solaris deployments.
Example: 10.42.42.1
Description: Network interface to configure for Solaris deployments.
Default value: PRIMARY
Description: Additional network interfaces to configure for Solaris deployments.
Example: bge1!netB 255.255.255.0 myhost-netB 192.168.1.0
Description: Configures IP Multipathing for Solaris deployments.
Example: qfe0_qfe4!database-net l 10.0.0.1 10.0.0.2 24 oracle-db 10.0.0.3 apache 10.0.0.4
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False).
Default value: TRUE
Description: Name of parent for Remote Agent (RA).
Default value: masterserver
Description: Whether RA parent is an MS (masterserver) or an LD (local distributor).
Default value: MS
Description: Name or IP address for RA host.
Default value: :[installPath]
Description: Type of RA connection (raw, ssl, ssh).
Default value: raw
Description: Whether RA has SSL authorization (y,n).
Default value: N
Description: Port for RA.
Default value: 1131
Description: Advanced parameters for RA.
Description: Network interfaces to use to provision Linux to target hosts. Use this variable for Linux OS profiles created with JET.
Default value: eth0
Description: Additional network interfaces to configure for RedHat Linux deployments. Use this variable for RedHat Linux OS profiles created with JET.
Example: eth1!--ip 1.2.3.4 --netmask 255.255.255.0 --bootproto static
Description: Additional network interfaces to configure for SuSe Linux deployments. Use this variable for SuSe Linux OS profiles created with JET.
Example: th1!static!onboot!1.2.3.4!255.255.255.0!1.2.3.255
Description: GUID of the target specified within {}
The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Description: Specifies the system type. For example, sunfirev20z, sunfirev40z, sunfirex2100, sunfirex4100, sunfirex4200
Default value: sunfirev20z
Description: IPMI IP address
Example: 10.5.133.135
Description: User ID to access IPMI
Description: Encrypted Password to access IPMI
Description:Specifies whether the provisioning software should use the boot net option to install the target host (true/false).
Default value: true
Description: Specifies if the provisioning software should use the console provided by the network management interface (true/false).
Default value: true
Description: SSH user ID to access the remote management interface.
Description: Encrypted SSH password to access the remote management interface.