The following list shows all component variables for the other IPMI target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system
Example: sunfire-v60x-host
Description: Virtual host name for the target system
Default value: :[installPath]-target
Description: Optional description of the target
Example: test v60x
Description: Mac address
Example: 00:0E:0C:07:E9:31
Description: IP address
Example: 10.42.42.77
Description: Network mask
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86)
Default value: x86
Description: Kernel architecture (sun4u, i86pc)
Default value: i86pc
Description: Size of disk
Default value: 20GB
Description: Default router to use for network connectivity
Example: 10.42.42.1
Description: Default router IP address for Solaris deployments.
Example: 10.42.42.1
Description: Network interface to configure for Solaris deployments.
Default value: PRIMARY
Description: Additional network interfaces to configure for Solaris deployments.
Example: bge1!netB 255.255.255.0 myhost-netB 192.168.1.0
Description: Configures IP Multipathing for Solaris deployments.
Example: qfe0_qfe4!database-net l 10.0.0.1 10.0.0.2 24 oracle-db 10.0.0.3 apache 10.0.0.4
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
Description: Name of parent for RA
Default value: masterserver
Description: Whether RA parent is an MS or an LD
Default value: MS
Description: Name or IP address of RA host
Default value: :[installPath]
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
Description: Whether RA has SSL authorization (y,n)
Default value: N
Description: Port for RA
Default value: 1131
Description: Advanced parameters for RA
Description: Network interfaces to use to provision Linux to target hosts. Use this variable for Linux OS profiles created with JET.
Default value: eth0
Description: Additional network interfaces to configure for RedHat Linux deployments. Use this variable for RedHat Linux OS profiles created with JET.
Example: eth1!--ip 1.2.3.4 --netmask 255.255.255.0 --bootproto static
Description: Additional network interfaces to configure for SuSe Linux deployments. Use this variable for SuSe Linux OS profiles created with JET.
Example: th1!static!onboot!1.2.3.4!255.255.255.0!1.2.3.255
Description: GUID of the target specified within {}
The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Example: {3AE45192-159D-11D8-AEF3-001083FDFE8A}
Description: Disk type (for example, SCSI, IDE)
Default value: scsi
Description: IPMI IP address
Example: 10.5.133.135
Description: User id to access IPMI
Description: Encrypted password to access IPMI
Description: Path to IPMI HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jar
Description: IPMI version
Default value: 1.5
Description: Does the network management interface provide power on/off service?
Default value: true
Description: Does the network management interface provide boot service (disk, then network)?
Default value: false
Description: Does the network management interface provide console service?
Default value: false