Sun RSC Target Host Variables

The following list shows all component variables for the Sun RSC target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.

installPath

Description: Physical host name for the target system

Example: sunfire-v880-host

target_host

Description: Virtual host name for the target system

Default value: :[installPath]-target

description

Description: Optional description of the target

Example: test v880

ethernet_mac_address

Description: Mac address

Example: 00:0E:0C:07:E9:31

ethernet_ip_address

Description: IP address

Example: 10.42.42.77

ethernet_netmask

Description: Network mask

Default value: 255.255.255.0

architecture

Description: Target architecture (for example, sun4u)

Default value: sun4u

kernel_arch

Description: Kernel architecture (sun4u)

Default value: sun4u

disk_size

Description: Size of disk

Default value: 20GB

default_router

Description: Default router to use for network connectivity

Example: 10.42.42.1

sysidcfg_default_route

Description: Default router IP address for Solaris deployments.

Example: 10.42.42.1

sysidcfg_network_interface

Description: Network interface to configure for Solaris deployments.

Default value: PRIMARY

networkifs_base_config

Description: Additional network interfaces to configure for Solaris deployments.

Example: bge1!netB 255.255.255.0 myhost-netB 192.168.1.0

ipmp_networkifs_base_config

Description: Configures IP Multipathing for Solaris deployments.

Example: qfe0_qfe4!database-net l 10.0.0.1 10.0.0.2 24 oracle-db 10.0.0.3 apache 10.0.0.4

osp_control_service

Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)

Default value: TRUE

sps_ra_parent

Description: Name of parent for RA

Default value: masterserver

sps_ra_parent_type

Description: Whether RA parent is an MS or an LD

Default value: MS

sps_ra_host

Description: Name or IP address of RA host

Default value: :[ethernet_ip_address]

sps_ra_conn

Description: Type of RA connection (raw, ssl, ssh)

Default value: raw

sps_ra_ssl_auth

Description: Whether RA has SSL authorization (y,n)

Default value: N

sps_ra_port

Description: Port for RA

Default value: 1131

sps_ra_adv_parms

Description: Advanced parameters for RA

rsc_ip_address

Description: RSC IP address

Example: 10.5.133.135

rsc_access_userid

Description: User id to access RSC

rsc_access_password

Description: Encrypted password to access RSC

terminal_server_ip_address

Description: IP address of terminal server connected to this system

Example: 10.5.133.135

terminal_server_protocol

Description: Communication protocol to use to connect to the terminal server.

If you are using a Cyclades terminal server, set this variable to ssh.

Default value: telnet

terminal_server_port

Description: Port of terminal server

terminal_server_userid

Description: Terminal server user id

terminal_server_password

Description: Encrypted password for terminal server

terminal_server_type

Description: Terminal server type

Default value: Cisco2621

terminal_server_version

Description: Terminal server version

terminal_server_hal_jar

Description: Path to terminal server hardware abstraction layer (HAL) JAR file

If you are using a Cyclades terminal server, set this value to file:///opt/n1osp/drivers/cyclades/cycladesTS.jar

Default value: file:///opt/n1osp/drivers/cisco/c2621.jar