The Java ES installer must be mounted on the host computer system where you will install Directory Server. See the section 2.2 Downloading and Mounting the Java Enterprise System 2005Q4 Installer in this manual.
Use the following as your checklist or installing two Directory Server:
As a root user, log in to the Directory Server 3SP host.
Start the installer with the nodisplay option. Example:
# cd /mnt/Solaris_sparc # ./installer -nodisplay
When prompted, provided the following information:
|
Press Enter. |
|
|
Press Enter. |
|
|
Enter y. |
|
|
Enter 8 to select “English only.” |
|
|
Enter 6,20. Be sure you've specified Sun Java System Administration Server 5 2005Q4 and Sun Java System Directory Server 5 2005Q4. |
|
|
Press Enter. |
|
|
If upgrades are required, enter 1 to upgrade shared components. |
|
|
Accept the default value for each product. |
|
|
Enter 1 to continue. |
|
|
Enter 1 to configure now. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
For this example, enter admin123. |
|
|
Enter the same password again. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
For this example, enter admin123. |
|
|
Enter the same password again. |
|
|
Accept the default value. |
|
|
For this example, enter 11111111. |
|
|
Enter the same password again. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Enter 1390. |
|
|
Enter dc=siroe,dc=com. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Enter 1 to choose “The new instance will be the configuration directory server.” |
|
|
Enter 1 to store data in the new directory server. |
|
|
Enter 4 to choose “Populate with no data.” |
|
|
Enter n. |
|
|
Accept the default value. |
|
|
Enter 1391. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
For this example, enter admin123. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Enter 1 to install now. |
(Optional) During installation, you can monitor the log to watch for installation errors. Example:
# cd /var/sadm/install/logs
# tail —f Java_Enterprise_System_install.B xxxxxx
Upon successful installation, enter ! to exit.
Verify that Directory Server was successfully installed.
As a root user, log in to Directory Server 3SP.
Start the Directory Server.
# cd /var/opt/mps/serverroot/slapd-DirectoryServer-3SP # ./stop-slapd; ./start-slapd
Use the tail command to monitor the Directory Server error log and see that the server successfully starts up.
# tail -50 logs/errors
Use the netstat command to verify that the Directory Server port is open and listening.
# netstat -an | grep 1390 * 1390 *.* 0 0 49152 0 LISTEN
Start the Administration Server that manages Directory Server.
cd /var/opt/mps/serverroot ./stop-admin; ./start-admin
Installation is successful if the Administration Server displays a start-up message.
Use the netstat command to verify that the Administration Server port is open and listening.
# netstat -an | grep 1391 * 1391 *.* 0 0 49152 0 LISTEN
As a root user, log in to the Directory Server 4SP host.
Start the installer with the nodisplay option. Example:
# cd /mnt/Solaris_sparc # ./installer -nodisplay
When prompted, provided the following information:
|
Press Enter. |
|
|
Press Enter. |
|
|
Enter y. |
|
|
Enter 8 to select “English only.” |
|
|
Enter 6,20. Be sure you've specified Sun Java System Administration Server 5 2005Q4 and Sun Java System Directory Server 5 2005Q4. |
|
|
Press Enter. |
|
|
If upgrades are required, enter 1 to upgrade shared components. |
|
|
Accept the default value for each product. |
|
|
Enter 1 to continue. |
|
|
Enter 1 to configure now. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
For this example, enter admin123. |
|
|
Enter the same password again. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
For this example, enter admin123. |
|
|
Enter the same password again. |
|
|
Accept the default value. |
|
|
For this example, enter 11111111. |
|
|
Enter the same password again. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Enter 1390. |
|
|
Enter dc=siroe,dc=com. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Enter 1 to choose “The new instance will be the configuration directory server.” |
|
|
Enter 1 to store data in the new directory server. |
|
|
Enter 4 to choose “Populate with no data.” |
|
|
Enter n. |
|
|
Accept the default value. |
|
|
Enter 1391 |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
For this example, enter admin123. |
|
|
Accept the default value. |
|
|
Accept the default value. |
|
|
Enter 1 to install now. |
(Optional) During installation, you can monitor the log to watch for installation errors. Example:
# cd /var/sadm/install/logs
# tail —f Java_Enterprise_System_install.B xxxxxx
Upon successful installation, enter ! to exit.
Verify that Directory Server was successfully installed.
As a root user, log in to Directory Server 4SP.
Start the Directory Server.
# cd /var/opt/mps/serverroot/slapd-DirectoryServer-4SP # ./stop-slapd; ./start-slapd
Use the tail command to monitor the Directory Server error log and verify that the server successfully starts up.
# tail -50 logs/errors
Use the netstat command to verify that the Directory Server port is open and listening.
# netstat -an | grep 1390 * 1390 *.* 0 0 49152 0 LISTEN
Start the Administration Server that manages Directory Server.
cd /var/opt/mps/serverroot ./stop-admin; ./start-admin
Installation is successful if the Administration Server displays a start-up message.
Use the netstat command to verify that the Administration Server port is open and listening.
# netstat -an | grep 1391 * 1391 *.* 0 0 49152 0 LISTEN