Synopsis

scha_cmds

- command standard output for scha_cluster_get, scha_control, scha_resource_get, scha_resourcegroup_get, scha_resourcetype_get, scha_resource_setstatus

 scha-command -O optag...

Description

The Oracle Solaris Cluster scha_cluster_get(1HA), scha_control(1HA), scha_resource_get(1HA), scha_resourcegroup_get(1HA), scha_resourcetype_get(1HA), and scha_resource_setstatus(1HA) commands are command-line implementations of the callback methods for resource types. See rt_callbacks(1HA).

Resource types represent services that are controlled by the cluster's Resource Group Manager (RGM) facility. These commands provide a command-line interface to the functionality of the scha_calls(3HA) C functions.

The get commands access cluster configuration information. All of these commands have the same general interface. These commands all take an -O optag operand. This operand indicates the information to be accessed. These commands all send the results to the standard output (stdout) as formatted strings. Additional arguments might be needed depending on the command and the value of optag. For information about the format of different optag results, see the “Results Format” section.

Note - optag options, for all scha commands, are not case sensitive. You can use any combination of uppercase and lowercase letters when you specify optag options.

The scha_control(1HA) command also takes an -O optag option that indicates a control operation, but does not produce output to standard output.

The scha_resource_setstatus(1HA) command sets the STATUS and STATUS_MSG properties of a resource that is managed by the RGM.

Result Formats

The format of strings that are output to the standard output by the commands depends on the type of the result that is indicated by the optag that you include with the -O option. Formats for each type are specified in the following table. Format notation is described in formats(5).

Result Type	Format on Standard Output
`boolean`	`TRUE\n` or `FALSE\n`
`enum`	`%s\n`, the string name of an `enum` value.
`extension`	`%s\n`, the type attribute of the extension property, which is one of the following values: `STRING`, `INT`, `BOOLEAN`, `ENUM`, or `STRINGARRAY`. Following the type information, the property value is output according to the formats for each type as follows: `STRING` as `string`, `INT` as `int`, `BOOLEAN` as `boolean`, `ENUM` as `enum`, `STRINGARRAY` as `string_array`.
`int`	`%d\n`
`status`	`%s\n%s\n`, the first string is the status, which is one of the following `enum` values: `DEGRADED`, `FAULTED`, `OFFLINE`, `ONLINE`, or `UNKNOWN`. The second string is the status message.
`string`	`%s\n`
`string_array`	Each element in the array is output in the format `%s\n`. An asterisk, indicating all nodes, zones, or resources, can be returned for the `GLOBAL_RESOURCES_USED` and `INSTALLED_NODES` properties.
`unsigned_int`	`%u\n`
`unsigned_int_array`	Each element in the array is output in the format `%u\n`

`optag` Result Types

The following table specifies the valid optag values for different commands as well as the type of the result that is output according to the formats specified in the previous table.

`optag` Values for `scha_cluster_get`(1HA)	Result Type
`ALL_NODEIDS`	`unsigned_int_array`
`ALL_NODENAMES`	`string_array`
`ALL_NONGLOBAL_ZONES`	`string`
`ALL_NONGLOBAL_ZONES_NODEID`	`string`
`ALL_PRIVATELINK_HOSTNAMES`	`string_array`
`ALL_RESOURCEGROUPS`	`string_array`
`ALL_RESOURCETYPES`	`string_array`
`ALL_ZONES`	`string`
`ALL_ZONES_NODEID`	`string`
`CLUSTERNAME`	`string`
`NODEID_LOCAL`	`unsigned_int`
`NODEID_NODENAME`	`unsigned_int`
`NODENAME_LOCAL`	`string`
`NODENAME_NODEID`	`string`
`NODESTATE_LOCAL`	`enum` (`UP`, `DOWN`)
`NODESTATE_NODE`	`enum` (`UP`, `DOWN`)
`PRIVATELINK_HOSTNAME_LOCAL`	`string`
`PRIVATELINK_HOSTNAME_NODE`	`string`
`SYSLOG_FACILITY`	`int`
`ZONE_LOCAL`	`string`

`optag` Values for `scha_control`(1HA)
`CHANGE_STATE_OFFLINE`
`CHANGE_STATE_ONLINE`
`CHECK_GIVEOVER`
`CHECK_RESTART`
`GIVEOVER`
`IGNORE_FAILED_START`
`RESOURCE_DISABLE`
`RESOURCE_IS_RESTARTED`
`RESOURCE_RESTART`
`RESTART`

`optag` Values for `scha_resource_get`(1HA)	Result Type
`AFFINITY_TIMEOUT`	`int`
`ALL_EXTENSIONS`	`string_array`
`BOOT_TIMEOUT`	`int`
`CHEAP_PROBE_INTERVAL`	`int`
`CHEAP_PROBE_INTERVAL`	`int`
`EXTENSION`	`extension`
`EXTENSION_NODE`	`extension`
`FAILOVER_MODE`	`enum` (`NONE`, `HARD`, `SOFT`, `RESTART_ONLY`, `LOG_ONLY` )
`FINI_TIMEOUT`	`int`
`GROUP`	`string`
`INIT_TIMEOUT`	`int`
`LOAD_BALANCING_POLICY`	`string`
`LOAD_BALANCING_WEIGHTS`	`string_array`
`MONITORED_SWITCH`	`enum` (`DISABLED`, `ENABLED`)
`MONITORED_SWITCH_NODE`	`enum` (`DISABLED`, `ENABLED`)
`MONITOR_CHECK_TIMEOUT`	`int`
`MONITOR_START_TIMEOUT`	`int`
`MONITOR_STOP_TIMEOUT`	`int`
`NETWORK_RESOURCES_USED`	`string_array`
`NUM_RESOURCE_RESTARTS`	`int`
`NUM_RESOURCE_RESTARTS_ZONE`	`int`
`NUM_RG_RESTARTS`	`int`
`NUM_RG_RESTARTS_ZONE`	`int`
`ON_OFF_SWITCH`	`enum` (`DISABLED`, `ENABLED`)
`ON_OFF_SWITCH_NODE`	`enum` (`DISABLED`, `ENABLED`)
`PORT_LIST`	`string_array`
`POSTNET_STOP_TIMEOUT`	`int`
`PRENET_START_TIMEOUT`	`int`
`R_DESCRIPTION`	`string`
`RESOURCE_DEPENDENCIES`	`string_array`
`RESOURCE_DEPENDENCIES_OFFLINE_RESTART`	`string_array`
`RESOURCE_DEPENDENCIES_RESTART`	`string_array`
`RESOURCE_DEPENDENCIES_WEAK`	`string_array`
`RESOURCE_PROJECT_NAME`	`string`
`RESOURCE_STATE`	`enum` (`ONLINE`, `OFFLINE`, `START_FAILED`, `STOP_FAILED`, `MONITOR_FAILED`, `ONLINE_NOT_MONITORED`, `STARTING`, `STOPPING`)
`RESOURCE_STATE_NODE`	`enum` (see `RESOURCE_STATE` for values)
`RETRY_COUNT`	`int`
`RETRY_INTERVAL`	`int`
`SCALABLE`	`boolean`
`START_TIMEOUT`	`int`
`STATUS`	`status`
`STATUS_NODE`	`status`
`STOP_TIMEOUT`	`int`
`THOROUGH_PROBE_INTERVAL`	`int`
`TYPE`	`string`
`TYPE_VERSION`	`string`
`UDP_AFFINITY`	`boolean`
`UPDATE_TIMEOUT`	`int`
`VALIDATE_TIMEOUT`	`int`
`WEAK_AFFINITY`	`boolean`

`optag` Values for `scha_resource_get`(1HA) and `scha_resourcetype_get`(1HA)	Result Type
`API_VERSION`	`int`
`BOOT`	`string`
`FAILOVER`	`boolean`
`FINI`	`string`
`GLOBAL_ZONE`	`boolean`
`INIT`	`string`
`INIT_NODES`	`enum` (`RG_PRIMARIES`, `RT_INSTALLED_NODES` )
`INSTALLED_NODES`	`string_array`. An asterisk (`*`) is returned to indicate all nodes.
`IS_LOGICAL_HOSTNAME`	`boolean`
`IS_SHARED_ADDRESS`	`boolean`
`MONITOR_CHECK`	`string`
`MONITOR_START`	`string`
`MONITOR_STOP`	`string`
`PER_NODE`	`boolean`
`PKGLIST`	`string_array`
`POSTNET_STOP`	`string`
`PRENET_START`	`string`
`PROXY`	`boolean`
`RT_BASEDIR`	`string`
`RT_DESCRIPTION`	`string`
`RT_SYSTEM`	`boolean`
`RT_VERSION`	`string`
`SINGLE_INSTANCE`	`boolean`
`START`	`string`
`STOP`	`string`
`UPDATE`	`string`
`VALIDATE`	`string`

`optag` Values for `scha_resourcegroup_get`(1HA)	Result Type
`AUTO_START_ON_NEW_CLUSTER`	`boolean`
`DESIRED_PRIMARIES`	`int`
`FAILBACK`	`boolean`
`GLOBAL_RESOURCES_USED`	`string_array` (an asterisk (`*`) is returned to indicate all resources)
`IMPLICIT_NETWORK_DEPENDENCIES`	`boolean`
`MAXIMUM_PRIMARIES`	`int`
`NODELIST`	`string_array`
`PATHPREFIX`	`string`
`PINGPONG_INTERVAL`	`int`
`RESOURCE_LIST`	`string_array`
`RG_AFFINITIES`	`string_array`
`RG_DEPENDENCIES`	`string_array`
`RG_DESCRIPTION`	`string`
`RG_IS_FROZEN`	`boolean`
`RG_MODE`	`enum` (`FAILOVER`, `SCALABLE`)
`RG_PROJECT_NAME`	`string`
`RG_SLM_CPU`	`decimal`
`RG_SLM_CPU_MIN`	`decimal`
`RG_SLM_PSET_TYPE`	`enum` (`DEFAULT`, `DEDICATED_STRONG`, `DEDICATED_WEAK`)
`RG_SLM_TYPE`	`enum` (`AUTOMATED`, `MANUAL`)
`RG_STATE`	`enum` (`UNMANAGED`, `ONLINE`, `OFFLINE`, `PENDING_ONLINE`, `PENDING_OFFLINE`, `ERROR_STOP_FAILED`, `ONLINE_FAULTED`, `PENDING_ONLINE_BLOCKED`)
`RG_STATE_NODE`	`enum` (see `RG_STATE` for values)
`RG_SYSTEM`	`boolean`
`SUSPEND_AUTOMATIC_RECOVERY`	`boolean`

Exit Status

One set of exit status codes is used for all scha commands.

The exit status codes are the numeric values of the scha_err_t return codes of the corresponding C functions as described in scha_calls(3HA).

Attributes

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	`SUNWscdev`
Interface Stability	Stable

Skip Navigation Links
Exit Print View
	Oracle Solaris Cluster Reference Manual