Sun StorEdge A3500 Cabling Diagrams

Installing a Sun StorEdge A3500 Storage System

Figure A-3 Installing a StorEdge A3500 Storage System: An Example

image:Illustration: The illustration shows the SE 3500 cabled to two nodes as shared storage.

For more sample configurations, see the Sun StorEdge A3500/A3500FC Hardware Configuration Guide.

For the procedure about how to install the cables, see the Sun StorEdge A3500/A3500FC Controller Module Guide.

Adding a Sun StorEdge A3500 Storage System

Connect the differential SCSI cable between the node and the controller module, as shown in Figure A-4. Ensure that the entire SCSI bus length to each storage array is less than 25 m. This measurement includes the cables to both nodes, as well as the bus length that is internal to each storage array, node, and host adapter.

Figure A-4 Cabling a StorEdge A3500 Storage System: An Example, Part 1

image:Illustration: The preceding context describes the graphic.

Figure A-5 Cabling a StorEdge A3500 Storage System: An Example, Part 2

image:Illustration: Node B is connected to both controllers in the storage system.

Skip Navigation Links
Exit Print View
	Oracle Solaris Cluster 3.3 With StorEdge A1000 Array, Netra st A1000 Array, or StorEdge A3500 System Manual For Solaris OS (SPARC Platform Edition)