auditon(2) (man pages section 2: System Calls)

man pages section 2: System Calls

auditon(2)

NAME

auditon- manipulate auditing

SYNOPSIS

cc [ flag ... ] file ... -lbsm -lsocket -lnsl -lintl [ library ... ]
#include <sys/param.h>
#include <bsm/audit.h>

cmd

data

length

DESCRIPTION

The auditon() function performs various audit subsystem control operations. The cmd argument designates the particular audit control command. The data argument is a pointer to command-specific data. The length argument is the length in bytes of the command-specific data.

The following commands are supported:

A_GETCOND

Return the system audit on/off/disabled condition in the integer long pointed to by data. The following values may be returned:

AUC_AUDITING: Auditing has been turned on.
AUC_DISABLED: Auditing system has not been enabled.
AUC_NOAUDIT: Auditing has been turned off.
AUC_NOSPACE: Auditing has blocked due to lack of space in audit partition.

A_SETCOND

Set the system's audit on/off condition to the value in the integer long pointed to by data. The BSM audit module must be enabled by bsmconv(1M) before auditing can be turned on. The following audit states may be set:

AUC_AUDITING: Turns on audit record generation.
AUC_NOAUDIT: Turns off audit record generation.

A_GETCLASS

Return the event to class mapping for the designated audit event. The data argument points to the au_evclass_map structure containing the event number. The preselection class mask is returned in the same structure.

A_SETCLASS

Set the event class preselection mask for the designated audit event. The data argument points to the au_evclass_map structure containing the event number and class mask.

A_GETKMASK

Return the kernel preselection mask in the au_mask structure pointed to by data. This is the mask used to preselect non-attributable audit events.

A_SETKMASK

Set the kernel preselection mask. The data argument points to the au_mask structure containing the class mask. This is the mask used to preselect non-attributable audit events.

A_GETPINFO

Return the audit ID, preselection mask, terminal ID and audit session ID of the specified process in the auditpinfo structure pointed to by data.

Note that A_GETPINFO may fail if the termial ID contains a network address longer than 32 bits. In this case, the A_GETPINFO_ADDR command should be used.

A_GETPINFO_ADDR

Returns the audit ID, preselection mask, terminal ID and audit session ID of the specified process in the auditpinfo_addr structure pointed to by data.

A_SETPMASK

Set the preselection mask of the specified process. The data argument points to the auditpinfo structure containing the process ID and the preselection mask. The other fields of the structure are ignored and should be set to NULL.

A_SETUMASK

Set the preselection mask for all processes with the specified audit ID. The data argument points to the auditinfo structure containing the audit ID and the preselection mask. The other fields of the structure are ignored and should be set to NULL.

A_SETSMASK

Set the preselection mask for all processes with the specified audit session ID. The data argument points to the auditinfo structure containing the audit session ID and the preselection mask. The other fields of the structure are ignored and should be set to NULL.

A_GETQCTRL

Return the kernel audit queue control parameters. These control the high and low water marks of the number of audit records allowed in the audit queue. The high water mark is the maximum allowed number of undelivered audit records. The low water mark determines when threads blocked on the queue are wakened. Another parameter controls the size of the data buffer used by auditsvc(2) to write data to the audit trail. There is also a parameter that specifies a maximum delay before data is attempted to be written to the audit trail. The audit queue parameters are returned in the au_qctrl structure pointed to bydata.

A_SETQCTRL

Set the kernel audit queue control parameters as described above in the A_GETQCTRL command. The data argument points to the au_qctrl structure containing the audit queue control parameters. The default and maximum values 'A/B' for the audit queue control parameters are:

high water: 100/10000 (audit records)
low water: 10/1024 (audit records)
output buffer size: 1024/1048576 (bytes)
delay: 20/20000 (hundredths second)

A_GETCWD

Return the current working directory as kept by the audit subsystem. This is a path anchored on the real root, rather than on the active root. The data argument points to a buffer into which the path is copied. The length argument is the length of the buffer.

A_GETCAR

Return the current active root as kept by the audit subsystem. This path may be used to anchor an absolute path for a path token generated by an application. The data argument points to a buffer into which the path is copied. The length argument is the length of the buffer.

A_GETSTAT

Return the system audit statistics in the audit_stat structure pointed to by data.

A_SETSTAT

Reset system audit statistics values. The kernel statistics value is reset if the corresponding field in the statistics structure pointed to by the data argument is CLEAR_VAL. Otherwise, the value is not changed.

A_SETFSIZE

Set the maximum size of an audit trail file. When the audit file reaches the designated size, it is closed and a new file started. If the maximum size is unset, the audit trail file generated by auditsvc() will grow to the size of the file system. The data argument points to the au_fstat_t structure containing the maximum audit file size in bytes. The size can not be set less than 0x80000 bytes.

A_GETFSIZE

Return the maximum audit file size and current file size in the au_fstat_t structure pointed to by the data argument.

A_GETPOLICY

Return the audit policy flags in the integer long pointed to by data.

A_SETPOLICY

Set the audit policy flags to the values in the integer long pointed to by data. The following policy flags are recognized:

AUDIT_CNT: Do not suspend processes when audit storage is full or inaccessible. The default action is to suspend processes until storage becomes available.
AUDIT_AHLT: Halt the machine when a non-attributable audit record can not be delivered. The default action is to count the number of events that could not be recorded.
AUDIT_ARGV: Include in the audit record the argument list for a member of the exec(2) family of functions. The default action is not to include this information.
AUDIT_ARGE: Include the environment variables for the execv(2) function in the audit record. The default action is not to include this information.
AUDIT_SEQ: Add a sequence token to each audit record. The default action is not to include it.
AUDIT_TRAIL: Append a trailer token to each audit record. The default action is not to include it.
AUDIT_GROUP: Include the supplementary groups list in audit records. The default action is not to include it.
AUDIT_PATH: Include secondary paths in audit records. Examples of secondary paths are dynamically loaded shared library modules and the command shell path for executable scripts. The default action is to include only the primary path from the system call.

RETURN VALUES

Upon successful completion, auditon() returns 0. Otherwise, -1 is returned and errno is set to indicate the error.

ERRORS

The auditon() function will fail if:

E2BIG: The length field for the command was too small to hold the returned value.
EFAULT: The copy of data to/from the kernel failed.
EINVAL: One of the arguments was illegal, or BSM has not been installed.
EPERM: The process's effective user ID is not superuser.

USAGE

The auditon() function can be invoked only by processes with superuser privileges.

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Interface Stability	Stable
MT-Level	MT-Safe

NOTES

The functionality described in this man page is available only if the Basic Security Module (BSM) has been enabled. See bsmconv(1M) for more information.

SunOS 5.9 Last Revised 18 Aug 1999