Before You Set Up a PPPoE Tunnel

Your preconfiguration activities depend on whether you configure the client side or server side of the tunnel. In either instance, you or your organization must contract with a telephone company. The telephone company provides the DSL lines for clients, and some form of bridging and possibly an ATM pipe for access servers. In most contracts, the telephone company assembles its equipment at your site.

Before Configuring a PPPoE Client

PPPoE client implementations usually consist of the following equipment:

• Personal computer or other system used by an individual

• DSL modem, which is usually installed by the telephone company or Internet access provider

• (Optional) A hub, if more than one client is involved, as is true for corporate DSL consumers

• (Optional) A splitter, usually installed by the provider

Many different DSL configurations are possible, which depends on the user or corporation's needs and the services that are offered by the provider.

Table 30-6 Planning for PPPoE Clients

Information	Action
If setting up a home PPPoE client for an individual or yourself, get any setup information that is outside the scope of PPPoE.	Ask the telephone company or ISP if it requires any setup procedures.
If setting up PPPoE clients at a corporate site, get the names of users to get PPPoE clients. If you configure remote PPPoE clients, it might be your responsibility to give users information for getting DSL equipment into their homes.	Ask management at your company for a list of authorized users.
Find out what interfaces are available on the PPPoE client.	Run the ifconfig -a command on each machine for interface names.
(Optional) Get the password for the PPPoE client.	Ask users for passwords that they prefer or assign them. Note that this password is used for link authentication, not for UNIX login.

Before Configuring a PPPoE Server

Planning for a PPPoE access server involves working with the telephone company that provides your connection to its data service network. The telephone company installs its lines, often ATM pipes, at your site, and provides some sort of bridging into your access server. You need to configure the Ethernet interfaces that access the services your company provides, for example, Internet access, as well as the Ethernet interfaces from the telephone company's bridge.

Table 30-7 Planning for a PPPoE Access Server

Information	Action
Interfaces that are used for lines from data service network	Run the ifconfig -a command to identify interfaces.
Types of services to provide from the PPPoE server	Ask management, network planners for their requirements and suggestions.
(Optional) Types of services to provide to the consumers	Ask management, network planners for their requirements and suggestions.
(Optional) Host names and passwords for remote clients	Ask network planners and other individuals at your site responsible for contract negotiations. The host names and passwords are used for PAP or CHAP authentication, not UNIX login.