sethostent(3NSL)
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUES | ERRORS | EXAMPLES | FILES | ATTRIBUTES | SEE ALSO | WARNINGS | NOTES
NAME
- gethostbyname, gethostbyname_r, gethostbyaddr, gethostbyaddr_r, gethostent, gethostent_r, sethostent, endhostent- get network host entry
SYNOPSIS
cc [ flag ... ] file ... -lnsl [ library ... ] #include <netdb.h>struct hostent *gethostbyname(const char *name);
struct hostent *gethostbyname_r(const char *name, struct hostent *result, char *buffer, intbuflen, int *h_errnop);
struct hostent *gethostbyaddr(const char *addr, int len, int type);
struct hostent *gethostbyaddr_r(const char *addr, int length, int type, struct hostent *result, char *buffer, int buflen, int *h_errnop);
struct hostent *gethostent(void);
struct hostent *gethostent_r(struct hostent *result, char *buffer, int buflen, int *h_errnop);
int sethostent(int stayopen);
int endhostent(void);
DESCRIPTION
These functions are used to obtain entries describing hosts. An entry may come from any of the sources for hosts specified in the /etc/nsswitch.conf file. See nsswitch.conf(4). Please take note that these functions have been superseded by the newer functions, getipnodebyname(3SOCKET), getipnodebyaddr(3SOCKET), and getaddrinfo(3SOCKET). The newer functions provide greater portability to applications when multithreading is done or technologies such as IPv6 are used. For example, the functions described below cannot be used with applications targeted to work with IPv6.
gethostbyname() searches for information for a host with the hostname specified by the character-string parameter name.
gethostbyaddr() searches for information for a host with a given host address. The parameter type specifies the family of the address. This should be one of the address families defined in <sys/socket.h>. See the NOTES section below for more information. Also see the EXAMPLES section below on how to convert a ``.'' separated Internet IP address notation into the addr parameter. The parameter len specifies the length of the buffer indicated by addr.
All addresses are returned in network order. In order to interpret the addresses, byteorder(3SOCKET) must be used for byte order conversion.
The functions sethostent(), gethostent(), and endhostent() are used to enumerate host entries from the database.
sethostent() sets (or resets) the enumeration to the beginning of the set of host entries. This function should be called before the first call to gethostent(). Calls to gethostbyname() and gethostbyaddr() leave the enumeration position in an indeterminate state. If the stayopen flag is non-zero, the system may keep allocated resources such as open file descriptors until a subsequent call to endhostent().
Successive calls to gethostent() return either successive entries or NULL, indicating the end of the enumeration.
endhostent() may be called to indicate that the caller expects to do no further host entry retrieval operations; the system may then deallocate resources it was using. It is still allowed, but possibly less efficient, for the process to call more host retrieval functions after calling endhostent().
Reentrant Interfaces
The functions gethostbyname(), gethostbyaddr(), and gethostent() use static storage that is reused in each call, making these functions unsafe for use in multi-threaded applications.
The functions gethostbyname_r(), gethostbyaddr_r(), and gethostent_r() provide reentrant interfaces for these operations.
Each reentrant interface performs the same operation as its non-reentrant counterpart, named by removing the ``_r'' suffix. The reentrant interfaces, however, use buffers supplied by the caller to store returned results, and are safe for use in both single-threaded and multi-threaded applications.
Each reentrant interface takes the same parameters as its non-reentrant counterpart, as well as the following additional parameters. The parameter result must be a pointer to a struct hostent structure allocated by the caller. On successful completion, the function returns the host entry in this structure. The parameter buffer must be a pointer to a buffer supplied by the caller. This buffer is used as storage space for the host data. All of the pointers within the returned struct hostent result point to data stored within this buffer. See RETURN VALUES. The buffer must be large enough to hold all of the data associated with the host entry. The parameter buflen should give the size in bytes of the buffer indicated by buffer. The parameter h_errnop should be a pointer to an integer. An integer error status value is stored there on certain error conditions. See ERRORS.
For enumeration in multi-threaded applications, the position within the enumeration is a process-wide property shared by all threads. sethostent() may be used in a multi-threaded application but resets the enumeration position for all threads. If multiple threads interleave calls to gethostent_r(), the threads will enumerate disjoint subsets of the host database.
Like their non-reentrant counterparts, gethostbyname_r() and gethostbyaddr_r() leave the enumeration position in an indeterminate state.
RETURN VALUES
struct hostent {
char *h_name; /* canonical name of host */
char **h_aliases; /* alias list */
int h_addrtype; /* host address type */
int h_length; /* length of address */
char **h_addr_list; /* list of addresses */
};
See the EXAMPLES section below for information about how to retrieve a ``.'' separated Internet IP address string from the h_addr_list field of struct hostent.
The functions gethostbyname(), gethostbyname_r(), gethostbyaddr(), and gethostbyaddr_r() each return a pointer to a struct hostent if they successfully locate the requested entry; otherwise they return NULL.
The functions gethostent() and gethostent_r() each return a pointer to a struct hostent if they successfully enumerate an entry; otherwise they return NULL, indicating the end of the enumeration.
The functions gethostbyname(), gethostbyaddr(), and gethostent() use static storage, so returned data must be copied before a subsequent call to any of these functions if the data is to be saved.
When the pointer returned by the reentrant functions gethostbyname_r(), gethostbyaddr_r(), and gethostent_r() is not NULL, it is always equal to the result pointer that was supplied by the caller.
The functions sethostent() and endhostent() return 0 on success.
ERRORS
The reentrant functions gethostbyname_r(), gethostbyaddr_r(), and gethostent_r() will return NULL and set errno to ERANGE if the length of the buffer supplied by caller is not large enough to store the result. See Intro(2) for the proper usage and interpretation of errno in multithreaded applications.
The reentrant functions gethostbyname_r() and gethostbyaddr_r() set the integer pointed to by h_errnop to one of these values in case of error.
On failures, the non-reentrant functions gethostbyname() and gethostbyaddr() set a global integer h_errno to indicate one of these error codes (defined in <netdb.h>): HOST_NOT_FOUND, TRY_AGAIN, NO_RECOVERY, NO_DATA, and NO_ADDRESS.
Note however that if a resolver is provided with a malformed address, or if any other error occurs before gethostbyname() is resolved, then gethostbyname() returns an internal error with a value of -1.
gethostbyname() will set h_errno to NETDB_INTERNAL when it returns a NULL value.
EXAMPLES
Example 1 Using gethostbyname()
Here is a sample program that gets the canonical name, aliases, and ``.'' separated Internet IP addresses for a given ``.'' separated IP address:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
main(int argc, const char **argv)
{
ulong_t addr;
struct hostent *hp;
char **p;
if (argc != 2) {
(void) printf("usage: %s IP-address\n", argv[0]);
exit (1);
}
if ((int)(addr = inet_addr(argv[1])) == -1) {
(void) printf("IP-address must be of the form a.b.c.d\n");
exit (2);
}
hp = gethostbyaddr((char *)&addr, sizeof (addr), AF_INET);
if (hp == NULL) {
(void) printf("host information for %s not found\n", argv[1]);
exit (3);
}
for (p = hp->h_addr_list; *p != 0; p++) {
struct in_addr in;
char **q;
(void) memcpy(&in.s_addr, *p, sizeof (in.s_addr));
(void) printf("%s\t%s", inet_ntoa(in), hp->h_name);
for (q = hp->h_aliases; *q != 0; q++)
(void) printf(" %s", *q);
(void) putchar('\n');
}
exit (0);
}
Note that the above sample program is unsafe for use in multithreadeded applications.
FILES
ATTRIBUTES
See attributes (5) for descriptions of the following attributes:
|
ATTRIBUTE TYPE |
ATTRIBUTE VALUE |
|---|---|
|
MT-Level |
See “Reentrant Interfaces” in DESCRIPTION. |
SEE ALSO
Intro(2), Intro(3), byteorder(3SOCKET), inet(3SOCKET), netdir(3NSL), hosts(4), netconfig(4), nsswitch.conf(4), attributes(5), netdb(3HEAD)
WARNINGS
The reentrant interfaces gethostbyname_r(), gethostbyaddr_r(), and gethostent_r() are included in this release on an uncommitted basis only, and are subject to change or removal in future minor releases.
NOTES
Programs that use the interfaces described in this manual page cannot be linked statically since the implementations of these functions employ dynamic loading and linking of shared objects at run time.
In order to ensure that they all return consistent results, gethostbyname(), gethostbyname_r(), and netdir_getbyname() are implemented in terms of the same internal library function. This function obtains the system-wide source lookup policy based on the inet family entries in netconfig(4) and the hosts: entry in nsswitch.conf(4). Similarly, gethostbyaddr(), gethostbyaddr_r(), and netdir_getbyaddr() are implemented in terms of the same internal library function. If the inet family entries in netconfig(4) have a ``-'' in the last column for nametoaddr libraries, then the entry for hosts in nsswitch.conf will be used; otherwise the nametoaddr libraries in that column will be used, and nsswitch.conf will not be consulted.
There is no analogue of gethostent() and gethostent_r() in the netdir functions, so these enumeration functions go straight to the hosts entry in nsswitch.conf. Thus enumeration may return results from a different source than that used by gethostbyname(), gethostbyname_r(), gethostbyaddr(), and gethostbyaddr_r().
All the functions that return a struct hostent must always return the canonical name in the h_name field. This name, by definition, is the well-known and official hostname shared between all aliases and all addresses. The underlying source that satisfies the request determines the mapping of the input name or address into the set of names and addresses in hostent. Different sources might do that in different ways. If there is more than one alias and more than one address in hostent, no pairing is implied between them.
The system will strive to put the addresses on the same subnet as that of the caller first.
When compiling multi-threaded applications, see Intro(3), Notes On Multithread Applications, for information about the use of the _REENTRANT flag.
Use of the enumeration interfaces gethostent() and gethostent_r() is discouraged; enumeration may not be supported for all database sources. The semantics of enumeration are discussed further in nsswitch.conf(4).
The current implementations of these functions only return or accept addresses for the Internet address family (type AF_INET).
The form for an address of type AF_INET is a struct in_addr defined in <netinet/in.h>. The functions described in inet(3SOCKET), and illustrated in the EXAMPLES section above, are helpful in constructing and manipulating addresses in this form.
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUES | ERRORS | EXAMPLES | FILES | ATTRIBUTES | SEE ALSO | WARNINGS | NOTES
- © 2010, Oracle Corporation and/or its affiliates