This section describes the commands executed in the system management software environment.

The following commands are supported:

addboard()

assign, connect and configure a board to a domain

addtag()

assign a domain name (tag) to a domain

cancelcmdsync()

command synchronization commands

console()

access the domain console

dca()

domain configuration agent

deleteboard()

unconfigure, disconnect and unassign a system board from a domain

deletetag()

remove the domain tag name associated with the domain

disablecomponent()

add the specified component to the specified blacklist file

dsmd()

domain status monitoring daemon

dxs()

domain X server

enablecomponent()

remove the specified component from the specified blacklist

esmd()

environmental status monitoring daemon

flashupdate()

update the Flash PROMs located on the CPU boards, MaxCPU boards and system controllers (SC)

fomd()

failover management daemon

frad()

FRU access daemon

help()

display help information for SMS commands

hpost()

Sun Fire 15K/12K power-on self-test (POST) control application

hwad()

hardware access daemon

initcmdsync()

command synchronization commands

kmd()

SMS key management daemon

mand()

management network daemon

mld()

message logging daemon

moveboard()

move a board from one domain to another

osd()

OpenBoot PROM server daemon

pcd()

platform configuration database daemon

poweroff()

control power off

poweron()

control power up

rcfgadm()

remote configuration administration

reset()

send reset to all CPU ports of a specified domain

resetsc()

reset the other system controller (SC)

runcmdsync()

prepare a specified script for recovery after a failover

savecmdsync()

command synchronization commands

setbus()

perform dynamic bus reconfiguration on active expanders in a domain

setdatasync()

modify the data propagation list used in data synchronization

setdate()

set the date and time for the system controller (SC) or a domain

setdefaults()

remove all instances of a previously active domain

setfailover()

modify the state of the system controller (SC) failover mechanism

setkeyswitch()

change the position of the virtual keyswitch

setobpparams()

set up OpenBoot PROM variables for a domain

setupplatform()

set up the available component list for domains

showboards()

show the assignment information and status of the boards

showbus()

display the bus configuration of expanders in active domains

showcmdsync()

display the current command synchronization list

showcomponent()

display the blacklist status for a component

showdatasync()

display the status of system controller (SC) data synchronization for failover

showdate()

display the date and time for the system controller (SC) or a domain

showdevices()

display system board devices and resource usage information

showenvironment()

display the environmental data

showfailover()

manage or display system controller (SC) failover status

showkeyswitch()

display the position of the virtual keyswitch

showlogs()

display message log files

showobpparams()

display OpenBoot PROM bring up parameters for a domain

showplatform()

display the board available component list and domain state for each of the domains

showxirstate()

display CPU dump information after sending a reset pulse to the processors

smsbackup()

back up the SMS environment

smsconfig()

configures the SMS environment

smsconnectsc()

accesses a remote SC console

smsrestore()

restore the SMS environment

smsversion()

change the active version of SMS to another co-resident version of the SMS software

ssd()

SMS startup daemon

tmd()

task management daemon