Name service, domain name, name server 

name_service=NIS, NIS+, DNS, LDAP, NONE

Options for NIS and NIS+: {domain_name=domain_name name_server=hostname(ip_address)}

name_service=NIS {domain_name=west.arp.com name_server=timber(129.221.2.1)}

name_service=NIS+ {domain_name=west.arp.com. name_server=timber(129.221.2.1)}

Options for DNS: {domain_name=domain_name name_server=ip_address,ip_address, ip_address (three maximum) search=domain_name,domain_name,domain_name,domain_name,domain_name, domain_name (six maximum, total length less than or equal to 250 characters)}

name_service=DNS {domain_name=west.arp.com name_server=10.0.1.10,10.0.1.20 search=arp.com,east.arp.com}

Choose only one value for name_service. Include either, both, or neither the domain_name and name_server keywords, as needed. If neither keyword is used, omit the curly braces {}.

Options for LDAP: {domain_name=domain_name profile=profile_name profile_server=ip_address proxy_dn="proxy_bind_dn" proxy_password=password}

name_service=LDAP 
{domain_name=west.arp.com 
profile=default 
profile_server=129.221.2.1 
proxy_dn="cn=proxyagent,ou=profile,
dc=west,dc=arp,dc=com" 
proxy_password=password}

The proxy_dn and proxy_password keywords are optional. The proxy_dn value must be enclosed in double quotes.

Network interface, host name, Internet Protocol (IP) address, netmask, DHCP, IPv6 

network_interface=NONE, PRIMARY, or value

• NONE turns off networking

• PRIMARY is the first up, non-loopback interface that is found on the system. The order is the same as with “ifconfig.” If no interfaces are up, then the first non-loopback interface is used. If no non-loopback interfaces are found, then the system is set to NON-NETWORKED.

• value specifies an interface such as le0 or hme0.

network_interface=primary {dhcp protocol_ipv6=yes}

If DHCP is not to be used, specify: {hostname=host_name default_route=ip_address or NONE ip_address=ip_address netmask=netmask protocol_ipv6=yes_or_no}

If you do not use DHCP, you are not required to specify protocol_ipv6=yes and default_route. But, a JumpStart installation requires protocol_ipv6 to be specified now or you are prompted interactively later.

network_interface=le0 {hostname=feron default_route=129.146.88.1 ip_address=129.146.88.210 netmask=255.255.0.0 protocol_ipv6=no}

Choose only one value for network_interface. Include any combination or none of the hostname, ip_address, and netmask keywords, as needed. If you do not use any of these keywords, omit the curly braces ({}).

Root password 

root_password=root_password

Encrypted from /etc/shadow.

Security policy 

security_policy=kerberos, NONE

Options for Kerberos: {default_realm=FQDN admin_server=FQDN kdc=FQDN1, FQDN2, FQDN3}

(FQDN is a fully qualified domain name)

security_policy=kerberos 
{default_realm=Yoursite.COM 
admin_server=krbadmin.Yoursite.COM 
kdc=kdc1.Yoursite.COM, 
kdc2.Yoursite.COM}

You can list a maximum of three key distribution centers (KDCs), but at least one is required.

Language in which to display the install program and desktop 

system_locale=locale

The /usr/lib/locale directory or Chapter 40, Locale Values (Reference) provides the valid locale values.

Terminal type 

terminal=terminal_type

The subdirectories in the /usr/share/lib/terminfo directory provide the valid terminal values.

Time zone 

timezone=timezone

The directories and files in the /usr/share/lib/zoneinfo directory provide the valid time zone values. The time zone value is the name of the path relative to the /usr/share/lib/zoneinfo directory. For example, the time zone value for mountain standard time in the United States is US/Mountain. The time zone value for Japan is Japan. You can also specify any valid Olson time zone.

Date and time 

timeserver=localhost, hostname, ip_addr

If you specify localhost as the time server, the system's time is assumed to be correct. If you are not running a name service and you specify the hostname or ip_addr of a system, that system's time is used to set the time.

IA: Monitor type 

monitor=monitor_type

On the system you want to install, run kdmconfig -d filename. Append output to sysidcfg file.

IA: Keyboard language, keyboard layout 

keyboard=keyboard_language {layout=value}

On the system you want to install, run kdmconfig -d filename. Append output to sysidcfg file.

IA: Graphics card, screen size, color depth, display resolution 

display=graphics_card {size=screen_size depth=color_depth resolution=screen_resolution}

On the system you want to install, run kdmconfig -d filename. Append output to sysidcfg file.

IA: Pointing device, number of buttons, IRQ level 

pointer=pointing_device {nbuttons=number_buttons irq=value}

On the system you want to install, run kdmconfig -d filename. Append output to sysidcfg file.