Network
|
Is
the system connected to a network?
|
Yes/No
|
DHCP
|
Can the system use
Dynamic Host Configuration Protocol (DHCP) to configure its network interfaces?
|
Yes/No
|
Host Name
|
Host name that you choose for the system.
|
|
IP Address
|
If you are not using
DHCP, supply the IP address for the system.
Example: 129.200.9.1
|
|
Subnet
|
If you are not using
DHCP, is the system part of a subnet?
If yes, what is the netmask
of the subnet?
Example: 255.255.0.0
|
Yes/No
|
IPv6
|
Do you want to enable IPv6 on this machine?
|
Yes/No
|
Kerberos
|
Do you want
to configure Kerberos security on this machine?
If yes, gather
this information:
|
Yes/No
|
Default Realm:
Administration Server:
First KDC:
(Optional) Additional KDCs:
|
|
Name Service
|
Which name service should
this system use?
|
NIS+/NIS/DNS/LDAP/None
|
Domain Name
|
If the system uses
a name service, supply the name of the domain in which the system resides.
|
|
NIS+ and NIS
|
Do you want to specify a name server or let the installation program find
one?
If you want to specify a name server, provide the following
information.
|
Specify One/Find One
|
Server's host name:
|
Server's IP Address:
|
DNS
|
Provide
IP addresses for the DNS server. You must enter at least one IP address, but
you can enter up to three addresses.
| |
Server's IP Address(es):
|
You can enter a list of domains to search when a DNS query is made.
|
Search Domain:
|
LDAP
|
Provide the following information about your LDAP profile.
| |
Profile Name:
|
Profile Server:
|
IP Address:
|
If
you specify a proxy credential level in your LDAP profile, gather this information.
|
Proxy-bind distinguished name:
|
Proxy-bind password:
|
Default Route
|
Do you want to specify a default route IP address or let the Solaris Web Start installation
program or Solaris suninstall program find one?
The default route provides a bridge that forwards traffic between two physical
networks. An IP address is a unique number that identifies each host on a
network.
You have the following choices:
-
You can specify the IP address. An /etc/defaultrouter file is created with the specified IP address. When the system
is rebooted, the specified IP address becomes the default route.
-
You can let the software detect an IP address.
-
The Solaris suninstall program detects an IP address when the system
is rebooted.
-
The Solaris Web Start installation program can detect a default
route. However, the system must be on a subnet that has a router that advertises
itself by using the ICMP router discovery protocol.
-
You can choose None if you do not have a router or do not
want the software to detect an IP address at this time. The software automatically
tries to detect an IP address on reboot.
|
Specify One/Find One/None
|
Host IP address:
|
Time Zone
|
How do you want to specify your default time zone?
|
Geographic region
Offset from
GMT
Time zone file
|
Locales
|
For which geographic regions do you want to install support?
|
|
SPARC: Power Management
(only available on SPARC systems that support Power
Management)
|
Do you want to
use Power Management?
Note –
If your system has Energy Star version
3 or later, you are not prompted for this information.
|
Yes/No
|
Proxy Server Configuration
(only available in the Solaris Web Start program)
|
Do you have a direct connection to the Internet or do you need to use a proxy
server to gain access to the Internet?
If you use a proxy server,
provide the following information.
|
Direct Connection/Proxy
Server
|
Host:
Port:
|
Automatic reboot or CD/DVD ejection
|
Reboot automatically after software
installation?
Eject CD/DVD automatically after software installation?
|
Yes/No
Yes/No
|
Disk Space Reallocation
|
Do you want the installation program to automatically
re-lay out file systems on your disks?
If yes, which file systems
should be used for auto-layout?
Example: /, /opt, /var
If no, you must provide
information for file system configuration.
|
Yes/No
|
SPARC: 64–bit
|
Do you want to install support for 64–bit
applications?
|
Yes/No
|