Three commands are used to display system and device configuration information.
Command |
Man Page |
Description |
---|---|---|
prtconf |
Displays system configuration information, including total amount of memory and the device configuration as described by the system's device hierarchy. The output displayed by this command depends upon the type of system. |
|
sysdef |
Displays device configuration information including system hardware, pseudo devices, loadable modules, and selected kernel parameters. |
|
dmesg |
Displays system diagnostic messages as well as a list of devices attached to the system since the last reboot. |
For information on the device names that are used to identify devices on the system, see Device Naming Conventions.
The following driver-related message might be displayed by the prtconf and sysdef commands:
device, instance #number (driver not attached) |
This message does not always mean that a driver is unavailable for this device. This message means that no driver is currently attached to the device instance because there is no device at this node or the device is not in use. Drivers are loaded automatically when the device is accessed and unloaded when the device is not in use.
Use the output of the prtconf and sysdef commands to identify which disk, tape, and CD-ROM devices are connected to the system. The output of these commands display the driver not attached messages next to the device instances. Since these devices are always being monitored by some system process, the driver not attached message is usually a good indication that there is no device at that device instance.
For example, the following prtconf output identifies a device at instance #3 and instance #6, which is probably a disk device at target 3 and a CD-ROM device at target 6 of the first SCSI host adapter (esp, instance #0).
$ /usr/sbin/prtconf . . . esp, instance #0 sd (driver not attached) st (driver not attached) sd, instance #0 (driver not attached) sd, instance #1 (driver not attached) sd, instance #2 (driver not attached) sd, instance #3 sd, instance #4 (driver not attached) sd, instance #5 (driver not attached) sd, instance #6 . . . |
You can glean the same device information from the sysdef output.
Use the prtconf command to display system configuration information.
# /usr/sbin/prtconf |
Use the sysdef command to display system configuration information that include pseudo devices, loadable modules, and selected kernel parameters.
# /usr/sbin/sysdef |
The following prtconf output is displayed on a SPARC based system.
# prtconf System Configuration: Sun Microsystems sun4u Memory size: 128 Megabytes System Peripherals (Software Nodes): SUNW,Ultra-5_10 packages (driver not attached) terminal-emulator (driver not attached) deblocker (driver not attached) obp-tftp (driver not attached) disk-label (driver not attached) SUNW,builtin-drivers (driver not attached) sun-keyboard (driver not attached) ufs-file-system (driver not attached) chosen (driver not attached) openprom (driver not attached) client-services (driver not attached) options, instance #0 aliases (driver not attached) memory (driver not attached) virtual-memory (driver not attached) pci, instance #0 pci, instance #0 ebus, instance #0 auxio (driver not attached) power, instance #0 SUNW,pll (driver not attached) se, instance #0 su, instance #0 su, instance #1 ecpp (driver not attached) fdthree, instance #0 . . . |
The following sysdef output is displayed from an x86 based system.
# sysdef * Hostid * 29f10b4d * * i86pc Configuration * * * Devices * +boot (driver not attached) memory (driver not attached) aliases (driver not attached) chosen (driver not attached) i86pc-memory (driver not attached) i86pc-mmu (driver not attached) openprom (driver not attached) options, instance #0 packages (driver not attached) delayed-writes (driver not attached) itu-props (driver not attached) isa, instance #0 motherboard (driver not attached) pnpADP,1542, instance #0 asy, instance #0 asy, instance #1 lp, instance #0 (driver not attached) fdc, instance #0 fd, instance #0 fd, instance #1 (driver not attached) kd (driver not attached) kdmouse (driver not attached) . . . |
Display device information with the dmesg command.
# /usr/sbin/dmesg |
The dmesg output is displayed as messages on the system console and identifies which devices are connected to the system since the last reboot.
The following dmesg output is displayed from a SPARC based system.
# dmesg Jan 3 08:44:41 starbug genunix: [ID 540533 kern.notice] SunOS Release 5.9 ... Jan 3 08:44:41 starbug genunix: [ID 913631 kern.notice] Copyright 1983-2002 ... Jan 3 08:44:41 starbug genunix: [ID 678236 kern.info] Ethernet address = ... Jan 3 08:44:41 starbug unix: [ID 389951 kern.info] mem = 131072K (0x8000000) Jan 3 08:44:41 starbug unix: [ID 930857 kern.info] avail mem = 121888768 Jan 3 08:44:41 starbug rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz) . . . # |
The following dmesg output is displayed from an x86 based system.
# dmesg Jan 2 07:21:46 naboo genunix: [ID 540533 kern.notice] SunOS Release 5.9 Version ... Jan 2 07:21:46 naboo genunix: [ID 913631 kern.notice] Copyright 1983-2002 ... Jan 2 07:21:46 naboo genunix: [ID 897550 kern.info] Using default device ... Jan 2 07:21:46 naboo unix: [ID 168242 kern.info] mem = 130684K (0x7f9f000) Jan 2 07:21:46 naboo unix: [ID 930857 kern.info] avail mem = 116547584 Jan 2 07:21:46 naboo rootnex: [ID 466748 kern.info] root nexus = i86pc Jan 2 07:21:46 naboo rootnex: [ID 349649 kern.info] pci0 at root: ... Jan 2 07:21:46 naboo genunix: [ID 936769 kern.info] pci0 is /pci@0,0 Jan 2 07:21:46 naboo genunix: [ID 678236 kern.info] Ethernet address = ... . . . |