次の手順に従って、現時点で実行レベル 0 になっているシステムを実行レベル 3 でブートします。
ok boot |
自動ブート処理では、一連のスタートアップメッセージ表示して、システムを実行レベル 3 にします。
詳細については、boot(1M) のマニュアルページを参照してください。
システムが実行レベル 3 になっていることを確認します。
ブートプロセスが正常に終了すると、ログイン画面かログインプロンプトが表示されます。
hostname console login: |
次の例は、システムを実行レベル 3 でブートしたときに表示されるメッセージを示しています。
ok boot Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz) OpenBoot 3.15, 128 MB memory installed, Serial #number. Ethernet address number, Host ID: number. Rebooting with command: boot Boot device: disk:a File and args: SunOS Release 5.9 Version Generic 64-bit Copyright (c) 1983-2002 by Sun Microsystems, Inc. configuring IPv4 interfaces: hme0. Hostname: starbug The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c0t0d0s7: is clean. /dev/rdsk/c0t0d0s4: is clean. NIS domainname is Solar.COM starting rpc services: rpcbind keyserv ypbind done. Setting netmask of hme0 to 255.255.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway starbug syslog service starting. Print services started. volume management starting. The system is ready. starbug console login: |