setcsn(1M) enables you to record the chassis serial number that identifies a Sun Fire high-end system. The chassis serial number is printed on a label located on the front of the system chassis, near the bottom center.

If you are upgrading to SMS 1.4 from an earlier SMS version, you must run the setcsn command to record the chassis serial number. The chassis serial number can be recorded only once. This command verifies the specified serial number, and if the number was previously recorded, this command will not allow you to set a different serial number.

Run this command on the main system controller. The chassis serial number is maintained as part of the platform configuration information.

The following options are supported:

-c chassis_serial_ number

Specifies the chassis serial number for a Sun Fire high-end system. You obtain this number from a label on the front of the system chassis, near the bottom center. The serial number can be a maximum of 20 alphanumeric characters.

-h

Help. Displays usage descriptions. Note – Use alone. Any option specified in addition to -h is ignored.

Group Privileges Required

The following exit values are returned:

0

Successful completion.

2

Usage error.

4

Permission error.

See attributes(5) for descriptions of the following attributes:

()pcd(1m), showplatform(1m)