| | | |
I |
|
| identifiant réseau ( ) ( ) ( ) |
|
| informations système, afficher ( ) |
|
| initialisation du système, réinitialiser d'abord les terminaux et l'affichage ( ) |
|
| initialisation réseau PXE (Preboot eXecution Environment) ( ) |
|
| initialisation via connexion WAN |
| | création |
| | | clé de chiffrement ( ) |
| | exemples |
| | | fichier wanboot.conf ( ) |
|
| installation |
| | comparaison de méthodes ( ) |
| | configuration système requise ( ) |
| | en comparaison avec une mise à niveau ( ) |
| | initialisation via connexion WAN, description ( ) |
| | présentation des tâches ( ) |
| | recommandations relatives à l'espace disque ( ) |
| | Solaris Flash archives, description ( ) |
|
| installation à partir du réseau, avec PXE ( ) |
|
| installation de systèmes clone |
| | installation initiale ( ) |
| | mise à jour ( ) |
|
| installation et initialisation via connexion WAN |
| | alias des périphériques dans l'OBP ( ) |
| | attaques de déni de service ( ) |
| | authentification client |
| | | conditions requises ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | authentification du serveur |
| | | conditions requises ( ) |
| | authentification serveur |
| | | spécification dans le fichier wanboot.conf ( ) |
| | binaires altérés ( ) |
| | caractéristiques requises |
| | | serveur Web ( ) |
| | caractéristiques requises pour le serveur Web ( ) |
| | certificats numériques |
| | | division ( ) |
| | | exigences ( ) |
| | | formatage ( ) |
| | | insertion ( ) |
| | chiffrement de données |
| | | à l'aide d'HTTPS ( ) |
| | | à l'aide d'une clé de chiffrement ( ) |
| | | via HTTPS ( ) |
| | clé de chiffrement |
| | | affichage de la valeur ( ) |
| | | création ( ) |
| | | installation ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | clé de hachage |
| | | affichage de la valeur ( ) |
| | | création ( ) |
| | | installation ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | clé privée |
| | | extraction à partir du fichier PKCS#12 ( ) |
| | | insertion dans le fichier keystore ( ) |
| | | utilisation pour l'authentification client ( ) |
| | configuration minimale requise pour le client ( ) |
| | authentification client |
| | | configuration ( ) |
| | command ewanbootutil |
| | | création d'un certificat de confiance ( ) |
| | | création d'une clé de chiffrement ( ) |
| | commande ickey ( ) |
| | commande set-security-key ( ) |
| | commande wanbootutil |
| | | affichage de la valeur d'une clé de chiffrement ( ) |
| | | affichage de la valeur de la clé de ( ) |
| | | affichage de la valeur de la clé de chiffrement ( ) |
| | | création d'une clé de chiffrement ( ) |
| | | création d'une clé de hachage ( ) ( ) |
| | | création d'une clé privée ( ) |
| | commandes ( ) |
| | commandewanbootutil |
| | | affichage de la valeur d'une clé de hachage ( ) |
| | configuration |
| | | authentification client et serveur ( ) ( ) ( ) |
| | | prise en charge du service DHCP ( ) |
| | | serveur d'initialisation via connexion WAN ( ) |
| | | serveur de journalisation ( ) |
| | configuration et fichiers de sécurité, description ( ) |
| | configuration minimale requise |
| | | espace disque client ( ) |
| | | espace disque du serveur d'installation ( ) |
| | | mémoire client ( ) |
| | | OBP pour le client ( ) |
| | | prise en charge de la version SSL ( ) |
| | | proxy Web ( ) |
| | | serveur d'initialisation via connexion WAN ( ) |
| | | serveur de journalisation ( ) |
| | | service DHCP ( ) |
| | | système d'exploitation pour le serveur Web ( ) |
| | | unité centrale client CPU ( ) |
| | configuration non sécurisée |
| | | conditions requises ( ) |
| | | description ( ) |
| | | tâches nécessaires à l'installation ( ) |
| | configuration sécurisée |
| | | conditions requises ( ) |
| | | description ( ) |
| | | tâches à effectuer ( ) |
| | configurations de sécurité, description ( ) |
| | configurations des serveurs, description ( ) |
| | copie du programme wanboot-cgi ( ) |
| | création |
| | | archive Solaris Flash ( ) |
| | | clé de hachage ( ) |
| | | fichier de configuration système ( ) |
| | | fichier de règles ( ) |
| | | fichier wanboot.conf ( ) |
| | | fichiersysidcfg ( ) |
| | | profil ( ) |
| | | scripts de début ( ) |
| | | scripts de fin ( ) |
| | déroulement des événements ( ) |
| | description ( ) |
| | avec support DHCP ( ) |
| | /etc/netboot répertoire |
| | | description ( ) |
| | exemples |
| | | à l'aide du chiffrement ( ) |
| | | activation de l'authentification serveur ( ) |
| | | configuration d'un serveur de journalisation ( ) ( ) |
| | | configuration du réseau ( ) |
| | | copie du programme wanboot-cgi ( ) |
| | | création d'une archive Solaris Flash ( ) |
| | | création d'une clé de chiffrement ( ) ( ) |
| | | création d'une clé de hachage ( ) ( ) |
| | | création de la miniracine de l'initialisation via connexion WAN ( ) |
| | | création du fichier de configuration système ( ) |
| | | création du profil JumpStart personnalisé ( ) |
| | | création du répertoire /etc/netboot ( ) |
| | | création du répertoire/etc/netboot ( ) |
| | | création fichier rules ( ) |
| | | création fichier sysidcfg ( ) |
| | | fichier de configuration système ( ) ( ) |
| | | fichier sysidcfg ( ) |
| | | fichier wanboot.conf ( ) ( ) |
| | | insertion d'un certificat de confiance ( ) ( ) |
| | | insertion de la clé privée client ( ) ( ) |
| | | insertion du certificat client ( ) ( ) |
| | | installation à partir d'un CD local ( ) |
| | | installation avec service DHCP ( ) |
| | | installation d'une clé de chiffrement dans l'OBP ( ) ( ) |
| | | installation d'une clé de chiffrement sur un client en cours de fonctionnement ( ) |
| | | installation d'une clé de hachage dans l'OBP ( ) ( ) |
| | | installation d'une clé de hachage sur un client en cours de fonctionnement ( ) |
| | | installation du programme wanboot ( ) |
| | | installation interactive ( ) |
| | | installation non interactive ( ) ( ) |
| | | installation sans surveillance ( ) ( ) |
| | | permet l'authentification client ( ) |
| | | permet l'authentification du serveur ( ) |
| | | préparation de certificats numériques ( ) |
| | | profil JumpStart personnalisé ( ) |
| | | répertoire /etc/netboot ( ) |
| | | répertoire document racine ( ) |
| | | vérification de l'alias de périphérique net ( ) ( ) ( ) |
| | | vérification de la prise en charge par l'OBP client ( ) ( ) |
| | exigences |
| | | certificats numériques ( ) |
| | fichier de configuration système |
| | | création ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | | syntaxe ( ) |
| | fichier wanboot.conf |
| | | création ( ) |
| | | validation ( ) |
| | informations requises pour l'installation ( ) |
| | installation d'un client |
| | | méthodes d'installation ( ) |
| | | tâches requises ( ) |
| | installation d'une clé de chiffrement ( ) |
| | | avec la commande ickey ( ) |
| | | dans l'OBP client ( ) |
| | | sur un client en cours de fonctionnement ( ) |
| | | avec la commande set-security-key ( ) |
| | installation d'une clé de hachage ( ) |
| | | avec la commande ickey ( ) |
| | | dans l'OBP client ( ) |
| | | sur un client en cours de fonctionnement ( ) |
| | | avec la commande set-security-key ( ) |
| | installation du programme wanboot ( ) |
| | installation interactive ( ) |
| | installation non interactive ( ) ( ) |
| | installation sans surveillance ( ) ( ) |
| | à partir d'un CD local ( ) |
| | miniracine de l'initialisation via connexion WAN |
| | | création ( ) |
| | | description ( ) |
| | | stockage dans le répertoire document racine ( ) |
| | miniracine de l'installation et d'initialisation via connexion WAN |
| | | spécification dans le fichier wanboot.conf ( ) |
| | paramètres du fichier wanboot.conf ( ) |
| | partage des fichiers de configuration et de sécurité |
| | | réseau complet ( ) |
| | | sous-réseau complet ( ) |
| | | spécifique à un client ( ) |
| | planification |
| | | agencement des serveurs ( ) |
| | | partage des fichiers de configuration et de sécurité ( ) |
| | | répertoire document racine ( ) |
| | | stockage de la configuration et des fichiers de sécurité ( ) |
| | | stockage des fichiers d'installation ( ) |
| | préparation des certificats numériques ( ) |
| | programme bootlog-cgi ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | programme wanboot |
| | | installation ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | | stockage dans le répertoire document racine ( ) |
| | programme wanboot-cgi ( ) |
| | | copie vers le serveur d'initialisation via connexion WAN ( ) |
| | | spécification dans le fichier wanboot.conf ( ) |
| | programmewanboot |
| | | description ( ) |
| | protection de données |
| | | à l'aide de certificats numériques ( ) |
| | protection des données |
| | | à l'aide d'une clé de chiffrement ( ) |
| | | à l'aide d'une clé de hachage ( ) |
| | questions de sécurité ( ) |
| | questions relatives à la confidentialité des clés de chiffrement ( ) |
| | questions relatives à la confidentialité des clés de hachage ( ) |
| | répertoire /etc/netboot |
| | | création ( ) |
| | | définition des autorisations ( ) |
| | répertoire document racine |
| | | description ( ) |
| | | exemple ( ) |
| | | fichiers ( ) |
| | authentification serveur |
| | | configuration ( ) |
| | serveur de journalisation |
| | | spécification dans le fichier wanboot.conf ( ) |
| | stockage du programme wanboot-cgi ( ) |
| | support OBP ( ) |
| | syntaxe du fichier wanboot.conf ( ) |
| | configuration minimale requise ( ) |
| | planification |
| | | configuration minimale requise ( ) |
| | vérification de la prise en charge par l'OBP client ( ) |
| | vérification des alias des périphériques dans l'OBP ( ) |
| | vérification du fichier de règles ( ) |
|
| installation et initialisation via connexion WAN répertoire |
| | /etc/netboot |
| | | exemple ( ) |
|
| installation et nitialisation via connexion WAN |
| | planification |
| | | /etc/netboot répertoire ( ) |
|
| installation JumpStart personnalisée ( ) |
| | avec installation et initialisation via connexion WAN ( ) |
| | en comparaison avec d'autres méthodes d'installation ( ) |
| | exemples ( ) ( ) |
| | | configuration de systèmes de marketing ( ) |
| | | configuration des systèmes du groupe technique ( ) |
| | | configuration du site ( ) ( ) |
| | | création de profil marketing ( ) |
| | | création du profil technique ( ) |
| | | édition du fichier des règles ( ) ( ) |
| | | en réseau ( ) |
| | | hors réseau ( ) |
| | | initialiser et installer ( ) |
| | | installation des systèmes du groupe Marketing ( ) |
| | | profil d'installation et initialisation via connexion WAN ( ) |
| | | profil de l'installation et initialisation via connexion WAN ( ) |
| | | profil Solaris Flash ( ) |
| | | répertoire JumpStart ( ) ( ) |
| | | script check ( ) |
| | | Solaris Flash profil ( ) ( ) |
| | | système autonome ( ) |
| | fonctions facultatives ( ) |
| | | présentation ( ) |
| | | programme d'installation spécifiques à l'organisation ( ) |
| | | scripts de début ( ) ( ) |
| | | scripts de fin ( ) ( ) |
| | initialisation et installation ( ) |
| | ligne tip et ( ) ( ) |
| | mise à niveau ( ) |
| | mots-clés de profil ( ) |
| | préparatifs ( ) ( ) |
| | présentation ( ) |
|
| installation par initialisation via connexion WAN, quand utiliser ( ) |
|
| installation réseau |
| | Voir aussi installation et initialisation via connexion WAN | |
| | à l'aide du CD ( ) ( ) ( ) |
| | à l'aide du DVD ( ) ( ) |
| | avec DHCP ( ) |
| | conditions ( ) |
| | description ( ) |
| | exemple d'installation et initialisation via connexion WAN ( ) |
| | installation JumpStart personnalisée |
| | | exemple ( ) |
| | préparation ( ) |
| | utilisation d'un support multiplates-formes ( ) |
| | utilisation de PXE ( ) |
|
| interface IDE |
| | analyse de la surface ( ) |
| | traçage des blocs erronés ( ) |
|
| interface réseau, préconfiguration ( ) |
|
| IPv6, préconfiguration ( ) |
|
| IRQ, préconfiguration ( ) |