System Administration Guide: Naming and Directory Services (DNS, NIS, and LDAP)

Chapter 18 LDAP General Reference (Reference)

This chapter covers the following topics.

Blank Checklists

Table 18–1 Server Variable Definitions


Variable	Definition for _______ Network
Port number at which an instance of the directory server is installed (389)
Name of server
Replica server(s) (IP number:port number)
Directory manager [`dn: cn=directory manager`]
Domain name to be served
Maximum time (in seconds) to process client requests before timing out
Maximum number of entries returned for each search request

Table 18–2 Client Profile Variable Definitions


Variable	Definition for ________ Network
Profile name
Server list (defaults to the local subnet)
Preferred server list (listed in order of which server to try first, second, and so on)
Search scope (number of levels down through the directory tree. '`One`' or '`Sub`')
Credential used to gain access to server. The default is `anonymous`
Follow Referrals? ( a pointer to another server if the main server is unavailable) The default is `no`.
Search time limit (in seconds, default `30`) for waiting for server to return information.
Bind time limit (in seconds, default `30`) for contacting server. The default is seconds.
Authentication method Default is `none`.

Upgrade Information

Solaris 9 clients are compatible with directory servers set up to serve Solaris 9 clients. ldapclient(1M) can download such a profile and configure the client using version 1 profiles. To take advantage of new features built into Solaris 9 and to use the new security model, you must use version 2 profiles.

Servers can serve a mix of both old and new clients so that both clients see the same results from the server as long as schema mapping is not enabled and version 2 profiles are not configured to use special filters in serviceSearchDescriptors. Obviously if the server is not using the default schema, older clients cannot use that server as Solaris 9 clients cannot arbitrarily map their schema.

One additional change is that in Solaris naming clients, running ldap_cachemgr() was recommended, but optional. The ldap_cachemgr() must be running at all times. The daemon is required for the client to function properly.

New `automount` Schema

By default, Solaris 9 uses a new schema for automount entries instead of using generic NIS map schema which Solaris 8 clients used. This means that if you set up a server with Solaris 9 tools, Solaris 8 clients cannot see the automount entries. For sites where the server being setup is to serve both Solaris 8 and Solaris 9 clients, a profile can be created to map the schema to the old one before adding automounter entries. This would ensure that ldapaddent(1M) adds the entries using the old schema. However, note that this would also mean that all Solaris 9 clients must use a profile where the schema for automount is mapped.

You need to add the following mapping attributes to your profile for this mapping to take effect.

attributeMap: 		automount:automountMapName=nisMapName
attributeMap: 		automount:automountKey=cn
attributeMap: 		automount:automountInformation=nisMapEntry
objectclassMap: 	  automount:automountMap=nisMap
objectclassMap: 	  automount:automount=nisObject

LDAP Commands

There are two sets of LDAP-related commands in the Solaris operating environment. One set is the general LDAP tools, which do not require the client to be configured with LDAP naming services. The second set uses the common LDAP configuration on the client and therefore can only be used if the client is configured to use LDAP as its naming service.

General LDAP Tools

LDAP command-line tools support a common set of options, including authentication and bind parameters.

These commands can be used to manipulate directory entries directly. The ldapsearch(1), ldapmodify(1), ldapadd(1), and ldapdelete(1) tools support a common text-based format for representing directory information called the LDAP Data Interchange Format (LDIF).

LDAP Tools Requiring LDAP Naming Services

Table 18–3 Tools (From Section 1 Man Pages)


Tool	Function
ldapaddent(1M)	Used to create entries in LDAP containers from the corresponding `/etc` files. This tool allows populating the directory from files. For example, it reads `/etc/passwd` format file and populates `passwd` entries in the directory.
ldaplist(1)	Used to list contents of various services from the directory.
idsconfig(1M)	Used to set up Sun ONE Directory Server to serve LDAP naming service clients.

Example `pam.conf` File for `pam_ldap`

#
# Authentication management
#
# login service (explicit because of pam_dial_auth)
#
login   auth required           pam_authtok_get.so.1
login   auth required           pam_dhkeys.so.1
login   auth required           pam_dial_auth.so.1
login   auth sufficient         pam_unix_auth.so.1
login   auth required           pam_ldap.so.1 try_first_pass
#
# rlogin service (explicit because of pam_rhost_auth)
#
rlogin  auth sufficient         pam_rhosts_auth.so.1
rlogin  auth required           pam_authtok_get.so.1
rlogin  auth required           pam_dhkeys.so.1
rlogin  auth sufficient         pam_unix_auth.so.1
rlogin  auth required           pam_ldap.so.1 try_first_pass
#
# rsh service (explicit because of pam_rhost_auth)
#
rsh     auth sufficient         pam_rhosts_auth.so.1
rsh     auth required           pam_authtok_get.so.1
rsh     auth required           pam_dhkeys.so.1
rsh     auth sufficient         pam_unix_auth.so.1
rsh     auth required           pam_ldap.so.1 try_first_pass
#
# PPP service (explicit because of pam_dial_auth)
#
ppp     auth required           pam_authtok_get.so.1
ppp     auth required           pam_dhkeys.so.1
ppp     auth required           pam_dial_auth.so.1
ppp     auth sufficient         pam_unix_auth.so.1
ppp     auth required           pam_ldap.so.1 try_first_pass
#
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned for authentication

#
other   auth required           pam_authtok_get.so.1
other   auth required           pam_dhkeys.so.1
other   auth sufficient         pam_unix_auth.so.1
other   auth required           pam_ldap.so.1 try_first_pass
#
# passwd command (explicit because of a different authentication module)

#
passwd  auth sufficient         pam_passwd_auth.so.1
passwd  auth required           pam_ldap.so.1  try_first_pass
#
# cron service (explicit because of non-usage of pam_roles.so.1)
#
cron    account required        pam_projects.so.1
cron    account required        pam_unix_account.so.1
#
# Default definition for Account management
# Used when service name is not explicitly mentioned for account
management
#
other   account requisite       pam_roles.so.1
other   account required        pam_projects.so.1
other   account required        pam_unix_account.so.1
#
# Default definition for Session management
# Used when service name is not explicitly mentioned for session
management
#
other   session required        pam_unix_session.so.1
#
# Default definition for  Password management
# Used when service name is not explicitly mentioned for password
management
#
other   password required       pam_dhkeys.so.1
other   password required       pam_authtok_get.so.1
other   password required       pam_authtok_check.so.1
other   password sufficient     pam_authtok_store.so.1
other   password required       pam_ldap.so.1
#
# Support for Kerberos V5 authentication (uncomment to use Kerberos)
#
#rlogin         auth optional           pam_krb5.so.1 try_first_pass
#login          auth optional           pam_krb5.so.1 try_first_pass
#other          auth optional           pam_krb5.so.1 try_first_pass
#cron           account optional        pam_krb5.so.1
#other          account optional        pam_krb5.so.1
#other          session optional        pam_krb5.so.1
#other          password optional       pam_krb5.so.1 try_first_pass

Example `pam_conf` file for `pam_ldap` Configured for Password Management

# PAM configuration
#
# Authentication management
#
# login service (explicit because of pam_dial_auth)
#
login  auth     requisite pam_authtok_get.so.1
login  auth     required  pam_dhkeys.so.1
login  auth     required  pam_dial_auth.so.1
login  auth     binding   pam_unix_auth.so.1 server_policy
login  auth     required  pam_ldap.so.1
#
# rlogin service (explicit because of pam_rhost_auth)
#
rlogin  auth     sufficient pam_rhosts_auth.so.1
rlogin  auth     requisite  pam_authtok_get.so.1
rlogin  auth     required   pam_dhkeys.so.1
rlogin  auth     binding    pam_unix_auth.so.1 server_policy
rlogin  auth     required   pam_ldap.so.1
#
# rsh service (explicit because of pam_rhost_auth,
# and pam_unix_auth for meaningful pam_setcred)
#
rsh     auth sufficient         pam_rhosts_auth.so.1
rsh     auth required           pam_unix_auth.so.1
#
# PPP service (explicit because of pam_dial_auth)
#
ppp     auth requisite          pam_authtok_get.so.1
ppp     auth required           pam_dhkeys.so.1
ppp     auth required           pam_dial_auth.so.1
ppp     auth binding            pam_unix_auth.so.1 server_policy
ppp     auth required           pam_ldap.so.1
#
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned for authentication
#
other   auth requisite          pam_authtok_get.so.1
other   auth required           pam_dhkeys.so.1
other   auth binding            pam_unix_auth.so.1 server_policy
other   auth required           pam_ldap.so.1
#
# passwd command (explicit because of a different authentication module)
#
passwd auth     binding   pam_passwd_auth.so.1 server_policy
passwd auth     required  pam_ldap.so.1
#
# cron service (explicit because of non-usage of pam_roles.so.1)
#
cron    account required        pam_projects.so.1
cron    account required        pam_unix_account.so.1
#
# Default definition for Account management
# Used when service name is not explicitly mentioned for account management
#
other  account  requisite pam_roles.so.1
other  account  required  pam_projects.so.1
other  account  binding   pam_unix_account.so.1 server_policy
other  account  required  pam_ldap.so.1
#
# Default definition for Session management
# Used when service name is not explicitly mentioned for session management
#
other   session required        pam_unix_session.so.1
#
# Default definition for Password management
# Used when service name is not explicitly mentioned for password management
#
other  password required  pam_dhkeys.so.1
other  password requisite pam_authtok_get.so.1
other  password requisite pam_authtok_check.so.1
other  password required  pam_authtok_store.so.1 server_policy
#
# Support for Kerberos V5 authentication (uncomment to use Kerberos)
#
#rlogin         auth optional           pam_krb5.so.1 try_first_pass
#login          auth optional           pam_krb5.so.1 try_first_pass
#other          auth optional           pam_krb5.so.1 try_first_pass
#cron           account optional        pam_krb5.so.1
#other          account optional        pam_krb5.so.1
#other          session optional        pam_krb5.so.1
#other          password optional       pam_krb5.so.1 try_first_pass

IETF Schemas

Schemas are definitions that describe what types of information can be stored as entries in a server's directory.

For a directory server to support Solaris LDAP naming clients, schemas defined in this chapter must be configured in the server unless schema is mapped using the schema mapping feature of the clients.

There are three required LDAP schemas defined by IETF: the RFC 2307 Network Information Service schema, the LDAP Mailgroups Internet draft, and the LDAP Internet Print Protocol (IPP) draft schema. To support the Naming Information Service, the definition of these schemas must be added to the directory server. The various RFCs can also be accessed on the IETF Web site http://www.ietf.org.

Note –

Internet drafts are draft documents valid for a maximum of six months and might be updated, or rendered obsolete, by other documents at any time.

RFC 2307 Network Information Service Schema

The LDAP servers must be configured to support the revised RFC 2307.

The nisSchema OID is 1.3.6.1.1. The RFC 2307 attributes are the following.

( nisSchema.1.0 NAME 'uidNumber'
DESC 'An integer uniquely identifying a user in an
		administrative domain'
EQUALITY integerMatch SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.1 NAME 'gidNumber'
DESC 'An integer uniquely identifying a group in an
		administrative domain'
EQUALITY integerMatch SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.2 NAME 'gecos'
DESC 'The GECOS field; the common name'
EQUALITY caseIgnoreIA5Match
SUBSTRINGS caseIgnoreIA5SubstringsMatch
SYNTAX 'IA5String' SINGLE-VALUE )
 
( nisSchema.1.3 NAME 'homeDirectory'
DESC 'The absolute path to the home directory'
EQUALITY caseExactIA5Match
SYNTAX 'IA5String' SINGLE-VALUE )
 
( nisSchema.1.4 NAME 'loginShell'
DESC 'The path to the login shell'
EQUALITY caseExactIA5Match
SYNTAX 'IA5String' SINGLE-VALUE )
 
( nisSchema.1.5 NAME 'shadowLastChange'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.6 NAME 'shadowMin'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.7 NAME 'shadowMax'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.8 NAME 'shadowWarning'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.9 NAME 'shadowInactive'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.10 NAME 'shadowExpire'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.11 NAME 'shadowFlag'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.12 NAME 'memberUid'
EQUALITY caseExactIA5Match
SUBSTRINGS caseExactIA5SubstringsMatch
SYNTAX 'IA5String' )
 
( nisSchema.1.13 NAME 'memberNisNetgroup'
EQUALITY caseExactIA5Match
SUBSTRINGS caseExactIA5SubstringsMatch
SYNTAX 'IA5String' )
 
( nisSchema.1.14 NAME 'nisNetgroupTriple'
DESC 'Netgroup triple'
SYNTAX 'nisNetgroupTripleSyntax' )
 
( nisSchema.1.15 NAME 'ipServicePort'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.16 NAME 'ipServiceProtocol'
SUP name )
 
( nisSchema.1.17 NAME 'ipProtocolNumber'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )
 
( nisSchema.1.18 NAME 'oncRpcNumber'
EQUALITY integerMatch
SYNTAX 'INTEGER' SINGLE-VALUE )

( nisSchema.1.19 NAME 'ipHostNumber'
DESC 'IP address as a dotted decimal, eg. 192.168.1.1
	     omitting leading zeros'
SUP name )
 
( nisSchema.1.20 NAME 'ipNetworkNumber'
DESC 'IP network as a dotted decimal, eg. 192.168,
     	omitting leading zeros'
SUP name SINGLE-VALUE )
 
( nisSchema.1.21 NAME 'ipNetmaskNumber'
DESC 'IP netmask as a dotted decimal, eg. 255.255.255.0,
	      omitting leading zeros'
EQUALITY caseIgnoreIA5Match
SYNTAX 'IA5String{128}' SINGLE-VALUE )
 
( nisSchema.1.22 NAME 'macAddress'
DESC 'MAC address in maximal, colon separated hex
      notation, eg. 00:00:92:90:ee:e2'
EQUALITY caseIgnoreIA5Match
SYNTAX 'IA5String{128}' )
 
( nisSchema.1.23 NAME 'bootParameter'
DESC 'rpc.bootparamd parameter'
SYNTAX 'bootParameterSyntax' )
 
( nisSchema.1.24 NAME 'bootFile'
DESC 'Boot image name'
EQUALITY caseExactIA5Match
SYNTAX 'IA5String' )
 
( nisSchema.1.26 NAME 'nisMapName'
SUP name )
 
( nisSchema.1.27 NAME 'nisMapEntry'
EQUALITY caseExactIA5Match
SUBSTRINGS caseExactIA5SubstringsMatch
SYNTAX 'IA5String{1024}' SINGLE-VALUE )
 
( nisSchema.1.28 NAME 'nisPublicKey'
DESC 'NIS public key'
SYNTAX 'nisPublicKeySyntax' )
 
( nisSchema.1.29 NAME 'nisSecretKey'
DESC 'NIS secret key'
SYNTAX 'nisSecretKeySyntax' )
 
( nisSchema.1.30 NAME 'nisDomain'
DESC 'NIS domain'
SYNTAX 'IA5String' )

( nisSchema.1.31 NAME 'automountMapName'
DESC 'automount Map Name'
EQUALITY caseExactIA5Match
SUBSTR caseExactIA5SubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )

( nisSchema.1.32 NAME 'automountKey'
DESC 'Automount Key value'
EQUALITY caseExactIA5Match
SUBSTR caseExactIA5SubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )

( nisSchema.1.33 NAME 'automountInformation'
DESC 'Automount information'
EQUALITY caseExactIA5Match
SUBSTR caseExactIA5SubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )

The nisSchema OID is 1.3.6.1.1. The RFC 2307 objectClasses are the following.

( nisSchema.2.0 NAME 'posixAccount' SUP top AUXILIARY
  DESC 'Abstraction of an account with POSIX attributes'
  MUST ( cn $ uid $ uidNumber $ gidNumber $ homeDirectory )
  MAY ( userPassword $ loginShell $ gecos $ description ) )
 
( nisSchema.2.1 NAME 'shadowAccount' SUP top AUXILIARY
  DESC 'Additional attributes for shadow passwords'
  MUST uid
  MAY ( userPassword $ shadowLastChange $ shadowMin
        shadowMax $ shadowWarning $ shadowInactive $
        shadowExpire $ shadowFlag $ description ) )
 
( nisSchema.2.2 NAME 'posixGroup' SUP top STRUCTURAL
  DESC 'Abstraction of a group of accounts'
  MUST ( cn $ gidNumber )
  MAY ( userPassword $ memberUid $ description ) )
 
( nisSchema.2.3 NAME 'ipService' SUP top STRUCTURAL
  DESC 'Abstraction an Internet Protocol service.
        Maps an IP port and protocol (such as tcp or udp)
        to one or more names; the distinguished value of
        the cn attribute denotes the service's canonical
        name'
  MUST ( cn $ ipServicePort $ ipServiceProtocol )
  MAY ( description ) )
 
( nisSchema.2.4 NAME 'ipProtocol' SUP top STRUCTURAL
  DESC 'Abstraction of an IP protocol. Maps a protocol number
        to one or more names. The distinguished value of the cn
        attribute denotes the protocol's canonical name'
  MUST ( cn $ ipProtocolNumber )
  MAY  description )
 
( nisSchema.2.5 NAME 'oncRpc' SUP top STRUCTURAL
  DESC 'Abstraction of an Open Network Computing (ONC)
        [RFC1057] Remote Procedure Call (RPC) binding.
        This class maps an ONC RPC number to a name.
        The distinguished value of the cn attribute denotes
        the RPC service's canonical name'
  MUST ( cn $ oncRpcNumber $ description )
  MAY  description )
 
( nisSchema.2.6 NAME 'ipHost' SUP top AUXILIARY
  DESC 'Abstraction of a host, an IP device. The distinguished
        value of the cn attribute denotes the host's canonical
        name. Device SHOULD be used as a structural class'
  MUST ( cn $ ipHostNumber )
  MAY ( l $ description $ manager $ userPassword ) )
 
( nisSchema.2.7 NAME 'ipNetwork' SUP top STRUCTURAL
  DESC 'Abstraction of a network. The distinguished value of
        the cn attribute denotes the network's canonical name'
  MUST ipNetworkNumber
  MAY ( cn $ ipNetmaskNumber $ l $ description $ manager ) )
 
( nisSchema.2.8 NAME 'nisNetgroup' SUP top STRUCTURAL
  DESC 'Abstraction of a netgroup. May refer to other netgroups'
  MUST cn
  MAY ( nisNetgroupTriple $ memberNisNetgroup $ description ) )

( nisSchema.2.9 NAME 'nisMap' SUP top STRUCTURAL
  DESC 'A generic abstraction of a NIS map'
  MUST nisMapName
  MAY description )
 
( nisSchema.2.10 NAME 'nisObject' SUP top STRUCTURAL
  DESC 'An entry in a NIS map'
  MUST ( cn $ nisMapEntry $ nisMapName )
  MAY description )

( nisSchema.2.11 NAME 'ieee802Device' SUP top AUXILIARY
  DESC 'A device with a MAC address; device SHOULD be
        used as a structural class'
  MAY macAddress )
 
( nisSchema.2.12 NAME 'bootableDevice' SUP top AUXILIARY
  DESC 'A device with boot parameters; device SHOULD be
  used as a structural class'
  MAY ( bootFile $ bootParameter ) )
 
( nisSchema.2.14 NAME 'nisKeyObject' SUP top AUXILIARY
  DESC 'An object with a public and secret key'
  MUST ( cn $ nisPublicKey $ nisSecretKey )
  MAY ( uidNumber $ description ) )
 
( nisSchema.2.15 NAME 'nisDomainObject' SUP top AUXILIARY
  DESC 'Associates a NIS domain with a naming context'
  MUST nisDomain )

( nisSchema.2.16 NAME 'automountMap' SUP top STRUCTURAL
  MUST ( automountMapName )
  MAY description )

( nisSchema.2.17 NAME 'automount' SUP top STRUCTURAL
  DESC 'Automount information'
  MUST ( automountKey $ automountInformation )
  MAY description )

Mail Alias Schema

Mail alias information uses the schema defined by the LDAP Mailgroups Internet draft, formerly known as the draft-steinback-ldap-mailgroups draft. Until a new schema becomes available, Solaris LDAP clients will continue to use this schema for mail alias information.

The original LDAP Mailgroups schema contains a large number of attributes and object classes. Only two attributes and a single object class are used by Solaris clients. These are listed below.

The mail alias Attributes are the following.

( 0.9.2342.19200300.100.1.3
  NAME 'mail'
  DESC 'RFC822 email address for this person'
  EQUALITY caseIgnoreIA5Match
  SYNTAX 'IA5String(256)'
  SINGLE-VALUE )
 
( 2.16.840.1.113730.3.1.30
  NAME 'mgrpRFC822MailMember'
  DESC 'RFC822 mail address of email only member of group'
  EQUALITY CaseIgnoreIA5Match
  SYNTAX 'IA5String(256)' )

The mail alias objectClass is the following.

( 2.16.840.1.113730.3.2.4
  NAME 'mailGroup'
  SUP top
  STRUCTURAL
  MUST mail
  MAY ( cn $ mailAlternateAddress $ mailHost $ mailRequireAuth $
   mgrpAddHeader $ mgrpAllowedBroadcaster $ mgrpAllowedDomain $
   mgrpApprovePassword $ mgrpBroadcasterModeration $ mgrpDeliverTo $
   mgrpErrorsTo $ mgrpModerator $ mgrpMsgMaxSize $
   mgrpMsgRejectAction $ mgrpMsgRejectText $ mgrpNoMatchAddrs $
   mgrpRemoveHeader $ mgrpRFC822MailMember ))

Directory User Agent Profile (`DUAProfile`) Schema

The DUAConfSchemaOID is 1.3.6.1.4.1.11.1.3.1.

DESC 'Default LDAP server host address used by a DUA'
            EQUALITY caseIgnoreMatch
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
            SINGLE-VALUE )

          ( DUAConfSchemaOID.1.1 NAME 'defaultSearchBase'
            DESC 'Default LDAP base DN used by a DUA'
            EQUALITY distinguishedNameMatch
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
            SINGLE-VALUE )

          ( DUAConfSchemaOID.1.2 NAME 'preferredServerList'
            DESC 'Preferred LDAP server host addresses to be used by a
            DUA'
            EQUALITY caseIgnoreMatch
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
            SINGLE-VALUE )

          ( DUAConfSchemaOID.1.3 NAME 'searchTimeLimit'
            DESC 'Maximum time in seconds a DUA should allow for a
            search to complete'
            EQUALITY integerMatch
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
            SINGLE-VALUE )

          ( DUAConfSchemaOID.1.4 NAME 'bindTimeLimit'
            DESC 'Maximum time in seconds a DUA should allow for the
            bind operation to complete'
            EQUALITY integerMatch
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
            SINGLE-VALUE )

          ( DUAConfSchemaOID.1.5 NAME 'followReferrals'
            DESC 'Tells DUA if it should follow referrals
            returned by a DSA search result'
            EQUALITY caseIgnoreIA5Match
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
            SINGLE-VALUE )

          ( DUAConfSchemaOID.1.6 NAME 'authenticationMethod'
            DESC 'A keystring which identifies the type of
            authentication method used to contact the DSA'
            EQUALITY caseIgnoreMatch
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
            SINGLE-VALUE )

          ( DUAConfSchemaOID.1.7 NAME 'profileTTL'
            DESC 'Time to live, in seconds, before a client DUA
            should re-read this configuration profile' 
				'serviceSearchDescriptor'
            DESC 'LDAP search descriptor list used by a DUA'
            EQUALITY caseExactMatch
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )

          ( DUAConfSchemaOID.1.9 NAME 'attributeMap'
            DESC 'Attribute mappings used by a DUA'
            EQUALITY caseIgnoreIA5Match
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )

          ( DUAConfSchemaOID.1.10 NAME 'credentialLevel'
            DESC 'Identifies type of credentials a DUA should
            use when binding to the LDAP server'
            EQUALITY caseIgnoreIA5Match
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.26
            SINGLE-VALUE )

          ( DUAConfSchemaOID.1.11 NAME 'objectclassMap'
            DESC 'Objectclass mappings used by a DUA'
            EQUALITY caseIgnoreIA5Match
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )

          ( DUAConfSchemaOID.1.12 NAME 'defaultSearchScope' SINGLE-VALUE )

          ( DUAConfSchemaOID.1.13 NAME 'serviceCredentialLevel'
            DESC 'Identifies type of credentials a DUA
            should use when binding to the LDAP server for a
            specific service'
            EQUALITY caseIgnoreIA5Match
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )

          ( DUAConfSchemaOID.1.15 NAME 'serviceAuthenticationMethod'
            DESC 'Authentication Method used by a service of the DUA'
            EQUALITY caseIgnoreMatch
            SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )

			  ( DUAConfSchemaOID.2.4 NAME 'DUAConfigProfile'
			  	 SUP top STRUCTURAL
				 DESC 'Abstraction of a base configuration for a DUA'
				 MUST ( cn )
				 MAY ( defaultServerList $ preferredServerList $
                defaultSearchBase $ defaultSearchScope $
                searchTimeLimit $ bindTimeLimit $
                credentialLevel $ authenticationMethod $
                followReferrals $ serviceSearchDescriptor $
                serviceCredentialLevel $ serviceAuthenticationMethod $
                objectclassMap $ attributeMap $
                profileTTL ) )

Solaris Schemas

The schemas required for the Solaris operating environment are the following.

Solaris Projects schema
Role-based access control and execution profile schemas
Printer schemas

Solaris Projects Schema

/etc/project is a local source of attributes associated with projects. For more information, see project(4).

The Project Attributes are the following.

( 1.3.6.1.4.1.42.2.27.5.1.1 NAME 'SolarisProjectID'
  DESC 'Unique ID for a Solaris Project entry'
  EQUALITY integerMatch
  SYNTAX INTEGER SINGLE )

( 1.3.6.1.4.1.42.2.27.5.1.2 NAME 'SolarisProjectName'
  DESC 'Name of a Solaris Project entry'
  EQUALITY caseExactIA5Match
  SYNTAX IA5String SINGLE )

( 1.3.6.1.4.1.42.2.27.5.1.3 NAME 'SolarisProjectAttr'
  DESC 'Attributes of a Solaris Project entry'
  EQUALITY caseExactIA5Match
  SYNTAX IA5String )

( 1.3.6.1.4.1.42.2.27.5.1.30 NAME 'memberGid'
  DESC 'Posix Group Name'
  EQUALITY caseExactIA5Match
  SYNTAX 'IA5String' )

The Project objectClass is the following.

( 1.3.6.1.4.1.42.2.27.5.2.1 NAME 'SolarisProject'
  SUP top STRUCTURAL
  MUST ( SolarisProjectID $ SolarisProjectName )
  MAY ( memberUid $ memberGid $ description $ SolarisProjectAttr ) )

Role-Based Access Control and Execution Profile Schema

/etc/user_attr is a local source of extended attributes associated with users and roles. For more information, see user_attr(4).

The role-based access control Attributes are the following.

( 1.3.6.1.4.1.42.2.27.5.1.4 NAME 'SolarisAttrKeyValue'
  DESC 'Semi-colon separated key=value pairs of attributes'
  EQUALITY caseIgnoreIA5Match
  SUBSTRINGS caseIgnoreIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )
 
( 1.3.6.1.4.1.42.2.27.5.1.7 NAME 'SolarisAttrShortDesc'
  DESC 'Short description about an entry, used by GUIs'
  EQUALITY caseIgnoreIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )
 
( 1.3.6.1.4.1.42.2.27.5.1.8 NAME 'SolarisAttrLongDesc'
  DESC 'Detail description about an entry'
  EQUALITY caseIgnoreIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )
 
( 1.3.6.1.4.1.42.2.27.5.1.9 NAME 'SolarisKernelSecurityPolicy'
  DESC 'Solaris  kernel security policy'
  EQUALITY caseIgnoreIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )
 
( 1.3.6.1.4.1.42.2.27.5.1.10 NAME 'SolarisProfileType'
  DESC 'Type of object defined in profile'
  EQUALITY caseIgnoreIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )
 
( 1.3.6.1.4.1.42.2.27.5.1.11 NAME 'SolarisProfileId'
  DESC 'Identifier of object defined in profile'
  EQUALITY caseExactIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )
 
( 1.3.6.1.4.1.42.2.27.5.1.12 NAME 'SolarisUserQualifier'
  DESC 'Per-user login attributes'
  EQUALITY caseIgnoreIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )
 
( 1.3.6.1.4.1.42.2.27.5.1.13 NAME 'SolarisReserved1'
  DESC 'Reserved for future use'
  EQUALITY caseIgnoreIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )
 
( 1.3.6.1.4.1.42.2.27.5.1.14 NAME 'SolarisReserved2'
  DESC 'Reserved for future use'
  EQUALITY caseIgnoreIA5Match
  SYNTAX 'IA5String' SINGLE-VALUE )

The role based access control objectClassses are the following.

( 1.3.6.1.4.1.42.2.27.5.2.3 NAME 'SolarisUserAttr' SUP top AUXILIARY
  DESC 'User attributes'
  MAY ( SolarisUserQualifier $ SolarisAttrReserved1 $ \
        SolarisAttrReserved2 $ SolarisAttrKeyValue ) )
 
( 1.3.6.1.4.1.42.2.27.5.2.4 NAME 'SolarisAuthAttr' SUP top STRUCTURAL
  DESC 'Authorizations data'
  MUST cn
  MAY ( SolarisAttrReserved1 $ SolarisAttrReserved2 $ \
        SolarisAttrShortDesc $ SolarisAttrLongDesc $ \
        SolarisAttrKeyValue ) )
 
( 1.3.6.1.4.1.42.2.27.5.2.5 NAME 'SolarisProfAttr' SUP top STRUCTURAL
  DESC 'Profiles data'
  MUST cn
  MAY ( SolarisAttrReserved1 $ SolarisAttrReserved2 $ \
        SolarisAttrLongDesc $ SolarisAttrKeyValue ) )
 
( 1.3.6.1.4.1.42.2.27.5.2.6 NAME 'SolarisExecAttr' SUP top AUXILIARY
  DESC 'Profiles execution attributes'
  MAY ( SolarisKernelSecurityPolicy $ SolarisProfileType $ \
        SolarisAttrReserved1 $ SolarisAttrReserved2 $ \
        SolarisProfileId $ SolarisAttrKeyValue ) )

Internet Print Protocol Information

The following sections provide information about the attributes and ObjectClasses for the internet print protocol and the Sun printer.

Internet Print Protocol (IPP) Attributes

( 1.3.18.0.2.4.1140 
NAME 'printer-uri' 
DESC 'A URI supported by this printer.  
This URI SHOULD be used as a relative distinguished name (RDN).  
If printer-xri-supported is implemented, then this URI value 
MUST be listed in a member value of printer-xri-supported.' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )

( 1.3.18.0.2.4.1107 
NAME 'printer-xri-supported' 
DESC 'The unordered list of XRI (extended resource identifiers) supported 
by this printer.  
Each member of the list consists of a URI (uniform resource identifier) 
followed by optional authentication and security metaparameters.' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )

( 1.3.18.0.2.4.1135 
NAME 'printer-name' 
DESC 'The site-specific administrative name of this printer, more end-user 
friendly than a URI.' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127}  SINGLE-VALUE )

( 1.3.18.0.2.4.1119 
NAME 'printer-natural-language-configured' 
DESC 'The configured language in which error and status messages will be 
generated (by default) by this printer.  
Also, a possible language for printer string attributes set by operator, 
system administrator, or manufacturer.  
Also, the (declared) language of the "printer-name", "printer-location", 
"printer-info", and "printer-make-and-model" attributes of this printer. 
For example: "en-us" (US English) or "fr-fr" (French in France) Legal values of 
language tags conform to [RFC3066] "Tags for the Identification of Languages".' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127}  SINGLE-VALUE )

( 1.3.18.0.2.4.1136 
NAME 'printer-location' 
DESC 'Identifies the location of the printer. This could include
things like: "in Room 123A", "second floor of building XYZ".' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )

( 1.3.18.0.2.4.1139 
NAME 'printer-info' 
DESC 'Identifies the descriptive information about this printer.  
This could include things like: "This printer can be used for 
printing color transparencies for HR presentations", or 
"Out of courtesy for others, please print only small (1-5 page) 
jobs at this printer", or even "This printer is going away on July 1, 1997, 
please find a new printer".' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} 
SINGLE-VALUE )

( 1.3.18.0.2.4.1134 
NAME 'printer-more-info' 
DESC 'A URI used to obtain more information about this specific printer.  
For example, this could be an HTTP type URI referencing an HTML page 
accessible to a Web Browser.  
The information obtained from this URI is intended for end user consumption.' 
EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )

( 1.3.18.0.2.4.1138 
NAME 'printer-make-and-model' 
DESC 'Identifies the make and model of the device.  
The device manufacturer MAY initially populate this attribute.' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127}  SINGLE-VALUE )

( 1.3.18.0.2.4.1133 
NAME 'printer-ipp-versions-supported' 
DESC 'Identifies the IPP protocol version(s) that this printer supports, 
including major and minor versions, 
i.e., the version numbers for which this Printer implementation meets 
the conformance requirements.' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )

( 1.3.18.0.2.4.1132 
NAME 'printer-multiple-document-jobs-supported' 
DESC 'Indicates whether or not the printer supports more than one 
document per job, i.e., more than one Send-Document or Send-Data 
operation with document data.' 
EQUALITY booleanMatch 
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE )

( 1.3.18.0.2.4.1109 
NAME 'printer-charset-configured' 
DESC 'The configured charset in which error and status messages will be 
generated (by default) by this printer.  
Also, a possible charset for printer string attributes set by operator, 
system administrator, or manufacturer.  
For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1).  
Legal values are defined by the IANA Registry of Coded Character Sets and 
the "(preferred MIME name)" SHALL be used as the tag.  
For coherence with IPP Model, charset tags in this attribute SHALL be 
lowercase normalized.  
This attribute SHOULD be static (time of registration) and SHOULD NOT be
dynamically refreshed attributetypes: (subsequently).' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{63} SINGLE-VALUE )

( 1.3.18.0.2.4.1131 
NAME 'printer-charset-supported' 
DESC 'Identifies the set of charsets supported for attribute type values of 
type Directory String for this directory entry.  
For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1).  
Legal values are defined by the IANA Registry of Coded Character Sets and 
the preferred MIME name.' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{63} )

( 1.3.18.0.2.4.1137 
NAME 'printer-generated-natural-language-supported' 
DESC 'Identifies the natural language(s) supported for this directory entry.  
For example: "en-us" (US English) or "fr-fr" (French in France).  
Legal values conform to [RFC3066], Tags for the Identification of Languages.' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{63} )

( 1.3.18.0.2.4.1130 
NAME 'printer-document-format-supported' 
DESC 'The possible document formats in which data may be interpreted 
and printed by this printer.  
Legal values are MIME types come from the IANA Registry of Internet Media Types.' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )

( 1.3.18.0.2.4.1129 
NAME 'printer-color-supported' 
DESC 'Indicates whether this printer is capable of any type of color printing 
at all, including highlight color.' 
EQUALITY booleanMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.7  SINGLE-VALUE )

( 1.3.18.0.2.4.1128 
NAME 'printer-compression-supported' 
DESC 'Compression algorithms supported by this printer.  
For example: "deflate, gzip".  Legal values include; "none", "deflate" 
attributetypes: (public domain ZIP), "gzip" (GNU ZIP), "compress" (UNIX).' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )

( 1.3.18.0.2.4.1127 
NAME 'printer-pages-per-minute' 
DESC 'The nominal number of pages per minute which may be output by this 
printer (e.g., a simplex or black-and-white printer).  
This attribute is informative, NOT a service guarantee.  
Typically, it is the value used in marketing literature to describe this printer.' 
EQUALITY integerMatch 
ORDERING integerOrderingMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.27  SINGLE-VALUE )

( 1.3.18.0.2.4.1126 NAME 'printer-pages-per-minute-color' 
DESC 'The nominal number of color pages per minute which may be output by this 
printer (e.g., a simplex or color printer).  
This attribute is informative, NOT a service guarantee.  
Typically, it is the value used in marketing literature to describe this printer.' 
EQUALITY integerMatch 
ORDERING integerOrderingMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.27  SINGLE-VALUE )

( 1.3.18.0.2.4.1125 NAME 'printer-finishings-supported' 
DESC 'The possible finishing operations supported by this printer. 
Legal values include; "none", "staple", "punch", "cover", "bind", "saddle-stitch", 
"edge-stitch", "staple-top-left", "staple-bottom-left", "staple-top-right", 
"staple-bottom-right", "edge-stitch-left", "edge-stitch-top", "edge-stitch-right", 
"edge-stitch-bottom", "staple-dual-left", "staple-dual-top", "staple-dual-right", 
"staple-dual-bottom".' 
EQUALITY caseIgnoreMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )

( 1.3.18.0.2.4.1124 NAME 'printer-number-up-supported' 
DESC 'The possible numbers of print-stream pages to impose upon a single side of 
an instance of a selected medium. Legal values include; 1, 2, and 4.  
Implementations may support other values.' 
EQUALITY integerMatch 
ORDERING integerOrderingMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.27 )

( 1.3.18.0.2.4.1123 NAME 'printer-sides-supported' 
DESC 'The number of impression sides (one or two) and the two-sided impression 
rotations supported by this printer.  
Legal values include; "one-sided", "two-sided-long-edge", "two-sided-short-edge".' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )

( 1.3.18.0.2.4.1122 NAME 'printer-media-supported' 
DESC 'The standard names/types/sizes (and optional color suffixes) of the media 
supported by this printer.  
For example: "iso-a4",  "envelope", or "na-letter-white".  
Legal values  conform to ISO 10175, Document Printing Application (DPA), and any 
IANA registered extensions.'
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )

( 1.3.18.0.2.4.1117 NAME 'printer-media-local-supported' 
DESC 'Site-specific names of media supported by this printer, in the language in 
"printer-natural-language-configured".  
For example: "purchasing-form" (site-specific name) as opposed to 
(in "printer-media-supported"): "na-letter" (standard keyword from ISO 10175).' 
EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )

( 1.3.18.0.2.4.1121 NAME 'printer-resolution-supported' 
DESC 'List of resolutions supported for printing documents by this printer.  
Each resolution value is a string with 3 fields:  
1) Cross feed direction resolution (positive integer), 2) Feed direction 
resolution (positive integer), 3) Resolution unit.  
Legal values are "dpi" (dots per inch) and "dpcm" (dots per centimeter).  
Each resolution field is delimited by ">".  For example:  "300> 300> dpi>".' 
EQUALITY caseIgnoreMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )

( 1.3.18.0.2.4.1120 NAME 'printer-print-quality-supported' 
DESC 'List of print qualities supported for printing documents on this printer.  
For example: "draft, normal".  Legal values include; "unknown", "draft", "normal", 
"high".' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )

( 1.3.18.0.2.4.1110 NAME 'printer-job-priority-supported' 
DESC 'Indicates the number of job priority levels supported.  
An IPP conformant printer which supports job priority must always support a 
full range of priorities from "1" to "100" 
(to ensure consistent behavior), therefore this attribute describes the 
"granularity". 
 Legal values of this attribute are from "1" to "100".' 
EQUALITY integerMatch 
ORDERING integerOrderingMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.27  SINGLE-VALUE )

( 1.3.18.0.2.4.1118 
NAME 'printer-copies-supported' 
DESC 'The maximum number of copies of a document that may be printed as a single job.  
A value of "0" indicates no maximum limit.  
A value of "-1" indicates unknown.' 
EQUALITY integerMatch 
ORDERING integerOrderingMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.27  SINGLE-VALUE )

( 1.3.18.0.2.4.1111 
NAME 'printer-job-k-octets-supported' 
DESC 'The maximum size in kilobytes (1,024 octets actually) incoming print job that 
this printer will accept.  
A value of "0" indicates no maximum limit.  A value of "-1" indicates unknown.' 
EQUALITY integerMatch 
ORDERING integerOrderingMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.27  SINGLE-VALUE )

( 1.3.18.0.2.4.1113 
NAME 'printer-service-person' 
DESC 'The name of the current human service person responsible for servicing this 
printer.  
It is suggested that this string include information that would enable other humans 
to reach the service person, such as a phone number.' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127}  
SINGLE-VALUE )

( 1.3.18.0.2.4.1114 
NAME 'printer-delivery-orientation-supported' 
DESC 'The possible delivery orientations of pages as they are printed and ejected 
from this printer.  
Legal values include; "unknown", "face-up", and "face-down".' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )

( 1.3.18.0.2.4.1115 
NAME 'printer-stacking-order-supported' 
DESC 'The possible stacking order of pages as they are printed and ejected from 
this printer. 
Legal values include; "unknown", "first-to-last", "last-to-first".' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )

( 1.3.18.0.2.4.1116 
NAME 'printer-output-features-supported' 
DESC 'The possible output features supported by this printer. 
Legal values include; "unknown", "bursting", "decollating", "page-collating", 
"offset-stacking".' 
EQUALITY caseIgnoreMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )

( 1.3.18.0.2.4.1108 
NAME 'printer-aliases' 
DESC 'Site-specific administrative names of this printer in addition the printer 
name specified for printer-name.' 
EQUALITY caseIgnoreMatch 
ORDERING caseIgnoreOrderingMatch 
SUBSTR caseIgnoreSubstringsMatch 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )

( 1.3.6.1.4.1.42.2.27.5.1.63 
NAME 'sun-printer-bsdaddr' 
DESC 'Sets the server, print queue destination name and whether the client generates 
protocol extensions. 
"Solaris" specifies a Solaris print server extension. The value is represented b the 
following value: server "," destination ", Solaris".' 
SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' SINGLE-VALUE )

( 1.3.6.1.4.1.42.2.27.5.1.64 
NAME 'sun-printer-kvp' 
DESC 'This attribute contains a set of key value pairs which may have meaning to the 
print subsystem or may be user defined. 
Each value is represented by the following: key "=" value.' 
SYNTAX '1.3.6.1.4.1.1466.115.121.1.15' )

Internet Print Protocol (IPP) `ObjectClasses`

objectclasses: ( 1.3.18.0.2.6.2549 
NAME 'slpService' 
DESC 'DUMMY definition' 
SUP 'top' MUST (objectclass) MAY ())

objectclasses: ( 1.3.18.0.2.6.254 
NAME 'slpServicePrinter' 
DESC 'Service Location Protocol (SLP) information.' 
AUXILIARY SUP 'slpService')

objectclasses: ( 1.3.18.0.2.6.258 
NAME 'printerAbstract' 
DESC 'Printer related information.' 
ABSTRACT SUP 'top' MAY ( printer-name 
$ printer-natural-language-configured 
$ printer-location 
$ printer-info 
$ printer-more-info 
$ printer-make-and-model 
$ printer-multiple-document-jobs-supported 
$ printer-charset-configured 
$ printer-charset-supported 
$ printer-generated-natural-language-supported 
$ printer-document-format-supported 
$ printer-color-supported 
$ printer-compression-supported 
$ printer-pages-per-minute 
$ printer-pages-per-minute-color 
$ printer-finishings-supported 
$ printer-number-up-supported 
$ printer-sides-supported 
$ printer-media-supported 
$ printer-media-local-supported 
$ printer-resolution-supported 
$ printer-print-quality-supported 
$ printer-job-priority-supported 
$ printer-copies-supported 
$ printer-job-k-octets-supported 
$ printer-current-operator 
$ printer-service-person 
$ printer-delivery-orientation-supported 
$ printer-stacking-order-supported $ printer! -output-features-supported ))

objectclasses: ( 1.3.18.0.2.6.255 
NAME 'printerService' 
DESC 'Printer information.' 
STRUCTURAL SUP 'printerAbstract' MAY ( printer-uri 
$ printer-xri-supported ))

objectclasses: ( 1.3.18.0.2.6.257 
NAME 'printerServiceAuxClass' 
DESC 'Printer information.' 
AUXILIARY SUP 'printerAbstract' MAY ( printer-uri $ printer-xri-supported ))

objectclasses: ( 1.3.18.0.2.6.256 
NAME 'printerIPP' 
DESC 'Internet Printing Protocol (IPP) information.' 
AUXILIARY SUP 'top' MAY   ( printer-ipp-versions-supported $ 
printer-multiple-document-jobs-supported ))

objectclasses: ( 1.3.18.0.2.6.253 
NAME 'printerLPR' 
DESC 'LPR information.' 
AUXILIARY SUP 'top' MUST ( printer-name ) MAY ( printer-aliases))

objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.14 
NAME 'sunPrinter' 
DESC 'Sun printer information' 
SUP 'top' AUXILIARY MUST (objectclass $ printer-name)  MAY 
(sun-printer-bsdaddr $ sun-printer-kvp))

Sun Printer Attributes

ATTRIBUTE ( 1.3.6.1.4.1.42.2.27.5.1.63
NAME sun-printer-bsdaddr
DESC 'Sets the server, print queue destination name and whether the 
     client generates protocol extensions. "Solaris" specifies a 
     Solaris print server extension.  The value is represented by 
     the following value: server "," destination ", Solaris".'
EQUALITY caseIgnoreIA5Match
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15   
SINGLE-VALUE
)


ATTRIBUTE ( 1.3.6.1.4.1.42.2.27.5.1.64
NAME sun-printer-kvp
DESC 'This attribute contains a set of key value pairs which may have
      meaning to the print subsystem or may be user defined.  Each
      value is represented by the following: key "=" value.'
EQUALITY caseIgnoreIA5Match 
SYNTAX  1.3.6.1.4.1.1466.115.121.1.15  )

Sun Printer `ObjectClasses`

OBJECTCLASS ( 1.3.6.1.4.1.42.2.27.5.2.14
NAME sunPrinter
DESC 'Sun printer information'
SUP  top
AUXILIARY
MUST ( printer-name )
MAY  ( sun-printer-bsdaddr $ sun-printer-kvp ))

Generic Directory Server Requirements

To support Solaris 9 LDAP clients, the server, regardless of what brand, must support the LDAP v3 protocol and compound naming and auxiliary object classes. In addition, at least one of the following controls must be supported.

Simple paged-mode (RFC 2696)
Virtual List View controls

The server must support at least one of the following authentication methods.
- anonymous
- simple
- sasl/cram-MD5
- sasl/digest-MD5

If using pam_unix, the server must support storing passwords in UNIX crypt format.

If using TLS, the server must support SSL or TLS.

Default Filters Used by LDAP Naming Services

If you do not manually specify a parameter for a given service using an SSD, the default filter is used. To list the default filters for a given service, use ldaplist with the —v option.

In the following example, filter=(&(objectclass=iphost)(cn=abcde)defines the default filters.

database=hosts
filter=(&(objectclass=iphost)(cn=abcde)
user data=(&(%s) (cn=abcde))

ldaplist generates the following list of default filters, where %s signifies a string and %d, a number.

hosts
(&(objectclass=iphost)(cn=%s))
--------------
passwd
(&(objectclass=posixaccount)(uid=%s))
--------------
services
(&(objectclass=ipservice)(cn=%s))
--------------
group
(&(objectclass=posixgroup)(cn=%s))
--------------
netgroup
(&(objectclass=nisnetgroup)(cn=%s))
--------------
networks
(&(objectclass=ipnetwork)(ipnetworknumber=%s))
--------------
netmasks
(&(objectclass=ipnetwork)(ipnetworknumber=%s))
--------------
rpc
(&(objectclass=oncrpc)(cn=%s))
--------------
protocols
(&(objectclass=ipprotocol)(cn=%s))
--------------
bootparams
(&(objectclass=bootableDevice)(cn=%s))
--------------
ethers
(&(objectclass=ieee802Device)(cn=%s))
--------------
publickey
(&(objectclass=niskeyobject)(cn=%s))
or
(&(objectclass=niskeyobject)(uidnumber=%d))
--------------
aliases
(&(objectclass=mailGroup)(cn=%s))
--------------

Table 18–4 LDAP Filters Used in getXbyY Calls


Filter	Definition
`bootparamByName`	`(&(objectClass=bootableDevice)(cn=%s))`
`etherByHost`	`(&(objectClass=ieee802Device)(cn=%s))`
`etherByEther`	`(&(objectClass=ieee802Device)(macAddress=%s))`
`groupByName`	`(&(objectClass=posixGroup)(cn=%s))`
`groupByGID`	`(&(objectClass=posixGroup)(gidNumber=%ld))`
`groupByMember`	`(&(objectClass=posixGroup)(memberUid=%s))`
`hostsByName`	`(&(objectClass=ipHost)(cn=%s))`
`hostsByAddr`	`(&(objectClass=ipHost)(ipHostNumber=%s))`
`keyByUID`	`(&(objectClass=nisKeyObject)(uidNumber=%s))`
`keyByHost`	`(&(objectClass=nisKeyObject)(cn=%s))`
`netByName`	`(&(objectClass=ipNetwork)(cn=%s))`
`netByAddr`	`(&(objectClass=ipNetwork)(ipNetworkNumber=%s))`
`nisgroupMember`	`(membernisnetgroup=%s)`
`maskByNet`	`(&(objectClass=ipNetwork)(ipNetworkNumber=%s))`
`printerByName`	`(&(objectClass=sunPrinter)(printer-name=%s))`
`projectByName`	`(&(objectClass=SolarisProject)(SolarisProjectName=%s))`
`projectByID`	`(&(objectClass=SolarisProject)(SolarisProjectID=%ld)`)
`protoByName`	`(&(objectClass=ipProtocol)(cn=%s))`
`protoByNumber`	`(&(objectClass=ipProtocol)(ipProtocolNumber=%d))`
`passwordByName`	`(&(objectClass=posixAccount)(uid=%s))`
`passwordByNumber`	`(&(objectClass=posixAccount)(uidNumber=%ld))`
`rpcByName`	`(&(objectClass=oncRpc)(cn=%s))`
`rpcByNumber`	`(&(objectClass=oncRpc)(oncRpcNumber=%d))`
`serverByName`	`(&(objectClass=ipService)(cn=%s))`
`serverByPort`	`(&(objectClass=ipService)(ipServicePort=%ld))`
`serverByNameAndProto`	`(&(objectClass=ipService)(cn=%s)(ipServiceProtocol=%s))`
`specialByNameserver`	`(ipServiceProtocol=%s))`
`ByPortAndProto`	`(&(objectClass=shadowAccount)(uid=%s))`
`netgroupByTriple`	`(&(objectClass=nisNetGroup)(nisnetgrouptriple=(%s,%s,%s)))`
`netgroupByMember`	`(&(objectClass=nisNetGroup)(\|(membernisnetgroup=%s)`
`authName`	`(&(objectClass=SolarisAuthAttr)(cn=%s))`
`auditUserByName`	`(&(objectClass=SolarisAuditUser)(uid=%s))`
`execByName`	`(&(objectClass=SolarisExecAttr)(cn=%s) (SolarisKernelSecurityPolicy=%s)(SolarisProfileType=%s))`
`execByPolicy`	`(&(objectClass=SolarisExecAttr)(SolarisProfileId=%s) (SolarisKernelSecurityPolicy=%s)(SolarisProfileType=%s))`
`profileByName`	`(&(objectClass=SolarisProfAttr)(cn=%s))`
`userByName`	`(&(objectClass=SolarisUserAttr)(uid=%s))`

The following table lists the getent attribute filters.

Table 18–5 getent Attribute Filters


Filter	Definition
`aliases`	`(objectClass=rfc822MailGroup)`
`auth_attr`	`(objectClass=SolarisAuthAttr)`
`audit_user`	`(objectClass=SolarisAuditUser)`
`exec_attr`	`(objectClass=SolarisExecAttr)`
`group`	`(objectClass=posixGroup)`
`hosts`	`(objectClass=ipHost)`
`networks`	`(objectClass=ipNetwork)`
`prof_attr`	`(objectClass=SolarisProfAttr)`
`protocols`	`(objectClass=ipProtocol)`
`passwd`	`(objectClass=posixAccount)`
`printers`	`(objectClass=sunPrinter)`
`rpc`	`(objectClass=oncRpc)`
`services`	`(objectClass=ipService)`
`shadow`	`(objectclass=shadowAccount)`
`project`	`(objectClass=SolarisProject)`
`usr_attr`	`(objectClass=SolarisUserAttr)`