Solaris オペレーティング環境では、さまざまなネームサービスに対応できるように、スイッチテンプレートファイルが 4 つ用意されています。 ファイルごとに、異なるデフォルトの情報ソースセットが提供されます。
4 つのテンプレートファイルは、次のとおりです。
「LDAP テンプレートファイル」(nsswitch.ldap ファイル)。 この構成ファイルでは、マシンの情報の一次ソースとして LDAP ディレクトリが指定されています。
LDAP ネームサービスを使用するには、すべての LDAP クライアントマシンを正しく設定し、nsswitch.conf を変更する必要があります。 詳細については、第 16 章「クライアントの設定 (手順)」を参照してください。
「NIS+ テンプレートファイル」(nsswitch.nisplus ファイル)。 nsswitch.nisplus 構成ファイルでは、passwd、group、automount、aliases を除くすべての情報の一次ソースとして NIS+ が指定されています。 これら 4 つのファイルでは、一次ソースはローカルの /etc ディレクトリのファイルで、 二次ソースは NIS+ テーブルです。 [NOTFOUND=return] という検索基準は、スイッチが「No such entry」というメッセージを受け取ったら NIS+ テーブルの検索を停止するという意味です。 スイッチは、NIS+ サーバーを使用できない場合、ローカルファイルのみ検索します。
「NIS テンプレートファイル」(nsswitch.nis ファイル)。 この構成ファイルは、NIS+ テーブルではなく NIS マップを使用するという点を除けば、NIS+ テンプレートファイルとほぼ同じです。 passwd、group の情報に関しては files nis という順序で検索するよう指定されているため、/etc/passwd と /etc/group に + エントリを指定する必要はありません。
「Files テンプレートファイル」(nsswitch.files ファイル)。 この構成ファイルでは、マシンの情報ソースとしてローカルの /etc ディレクトリのファイルだけが指定されています。 netgroup に関する files のソースは存在しないため、クライアントがスイッチファイルでこのエントリを使用することはありません。
要件に一番近いテンプレートファイルを nsswitch.conf 構成ファイルにコピーして、必要に応じてファイルを変更します。
たとえば、LDAP テンプレートファイルを使用する場合は、次のコマンドを入力します。
mymachine# cp /etc/nsswitch.ldap /etc/nsswitch.conf |
Solaris オペレーティング環境で用意されている 4 つのスイッチファイルは、次のとおりです。
# # # /etc/nsswitch.nisplus: # # # An example file that could be copied over to /etc/nsswitch.conf; # it uses NIS+ (NIS Version 3) in conjunction with files. # # "hosts:" and "services:" in this file are used only if the # /etc/netconfig file has a "-" for nametoaddr_libs of "inet" # transports. # the following two lines obviate the "+" entry in /etc/passwd # and /etc/group. passwd: files nisplus group: files nisplus # consult /etc "files" only if nisplus is down. hosts: nisplus [NOTFOUND=return] files # Uncomment the following line, and comment out the above, to use # both DNS and NIS+. You must also set up the /etc/resolv.conf # file for DNS name server lookup. See resolv.conf(4). # hosts: nisplus dns [NOTFOUND=return] files services: nisplus [NOTFOUND=return] files networks: nisplus [NOTFOUND=return] files protocols: nisplus [NOTFOUND=return] files rpc: nisplus [NOTFOUND=return] files ethers: nisplus [NOTFOUND=return] files netmasks: nisplus [NOTFOUND=return] files bootparams: nisplus [NOTFOUND=return] files publickey: nisplus netgroup: nisplus automount: files nisplus aliases: files nisplus sendmailvars: files nisplus |
# # /etc/nsswitch.nis: # # An example file that could be copied over to /etc/nsswitch.conf; # it uses NIS (YP) in conjunction with files. # # "hosts:" and "services:" in this file are used only if the # /etc/netconfig file has a "-" for nametoaddr_libs of "inet" # transports. # # the following two lines obviate the "+" entry in /etc/passwd # and /etc/group. passwd: files nis group: files nis # consult /etc "files" only if nis is down. hosts: nis [NOTFOUND=return] files networks: nis [NOTFOUND=return] files protocols: nis [NOTFOUND=return] files rpc: nis [NOTFOUND=return] files ethers: nis [NOTFOUND=return] files netmasks: nis [NOTFOUND=return] files bootparams: nis [NOTFOUND=return] files publickey: nis [NOTFOUND=return] files netgroup: nis automount: files nis aliases: files nis # for efficient getservbyname() avoid nis services: files nis sendmailvars: files |
# # /etc/nsswitch.files: # # An example file that could be copied over to /etc/nsswitch.conf; # it does not use any naming service. # # "hosts:" and "services:" in this file are used only if the # /etc/netconfig file has a "-" for nametoaddr_libs of "inet" # transports. passwd: files group: files hosts: files networks: files protocols: files rpc: files ethers: files netmasks: files bootparams: files publickey: files # At present there isn't a 'files' backend for netgroup; # the system will figure it out pretty quickly, and will notuse # netgroups at all. netgroup: files automount: files aliases: files services: files sendmailvars: files |
# # /etc/nsswitch.ldap: # # An example file that could be copied over to /etc/nsswitch.conf; it # uses LDAP in conjunction with files. # # "hosts:" and "services:" in this file are used only if the # /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports. # the following two lines obviate the "+" entry in /etc/passwd and /etc/group. passwd: files ldap group: files ldap hosts: ldap [NOTFOUND=return] files networks: ldap [NOTFOUND=return] files protocols: ldap [NOTFOUND=return] files rpc: ldap [NOTFOUND=return] files ethers: ldap [NOTFOUND=return] files netmasks: ldap [NOTFOUND=return] files bootparams: ldap [NOTFOUND=return] files publickey: ldap [NOTFOUND=return] files netgroup: ldap automount: files ldap aliases: files ldap # for efficient getservbyname() avoid ldap services: files ldap sendmailvars: files |
Solaris オペレーティング環境と共にインストールされるデフォルトの nsswitch.conf ファイルは、インストール時に選択したネームサービスで決まります。 ファイルの各行は、ネットワーク情報の種類 (ホスト、パスワード、グループなど) と、それに対する情報ソース (NIS+ テーブル、NIS マップ、DNS ホストテーブル、同一マシン上の /etc など) を対応させています。 ネームサービスを選択すると、そのサービスのスイッチテンプレートファイルがコピーされ新しい nsswitch.conf ファイルが作成されます。 たとえば、NIS+ を選択した場合は、nsswitch.nisplus ファイルがコピーされ新しい nsswitch.conf ファイルが作成されます。
nsswitch.conf ファイルは、Solaris 9 リリースをインストールすると各マシンの /etc ディレクトリに自動的に作成されます。また、次の 4 つの代替テンプレートファイルも作成されます。
これらの 4 つの代替テンプレートファイルには、それぞれネットワーク情報の情報ソースとして NIS+、NIS、ローカルファイル、 または LDAP を使用する標準的なスイッチ構成が設定されています。 DNS 用のデフォルトファイルは提供されませんが、これら 4 つのファイルのどれでも編集して DNS 用に使用できます。 第 5 章「DNS の管理 (参照情報)」を参照してください。 Solaris オペレーティング環境をマシンに最初にインストールするとき、インストーラによりマシンのデフォルトのネームサービスが選択されます。 インストール中に、選択されたネームサービスに対応するテンプレートファイルが /etc/nsswitch.conf にコピーされます。 たとえば、NIS+ を使用しているクライアントマシンでは、インストールの過程で nsswitch.nisplus が nsswitch.conf にコピーされます。
ネットワークがインターネットに接続されており、ユーザーが DNS を使用してインターネット上のホストにアクセスする必要がある場合は、DNS 転送を有効にする必要があります。
特殊な名前空間を持っている場合を除き、通常の操作には nsswitch.conf にコピーされるデフォルトのテンプレートファイルを使用します。