test

Solaris Volume Manager Administration Guide

Maintaining Hot Spare Pools

The following sections show how to perform maintenance tasks on hot spare pools.

ProcedureHow to Check the Status of Hot Spares and Hot Spare Pools

Step

    To view the status of a hot spare pool and its hot spares, use one of the following methods:

    • From the Enhanced Storage tool within the Solaris Management Console, open the Hot Spare Pools node and select a hot spare pool. Choose Action->Properties to get detailed status information. For more information, see the online help.

    • Run the following form of the metastat command:


      metastat hot-spare-pool-name
Example 17–8 Viewing Hot Spare Pool Status

Here is sample output from the metastat command on a hot spare pool.


# metastat hsp001
hsp001: 1 hot spare
        c1t3d0s2                Available       16800 blocks

The metahs command can also be used to check the status of hot spare pool.

ProcedureHow to Replace a Hot Spare in a Hot Spare Pool

Steps

  1. Verify whether the hot spare is currently being used by using one of the following methods:

    • From the Enhanced Storage tool within the Solaris Management Console, open the Hot Spare Pools node and select a hot spare pool. Choose Action->Properties, then choose the Hot Spares panel and follow the instructions. For more information, see the online help.

    • Use the following form of the metastat command:


      metastat hot-spare-pool-name

      See the metastat(1M) man page.

  2. To replace the hot spare, use one of the following methods:

    • From the Enhanced Storage tool within the Solaris Management Console, open the Hot Spare Pools node and select a hot spare pool. Choose Action->Properties, then choose the Hot Spares panel and follow the instructions. For more information, see the online help.

    • Use the following form of the metahs command:


      metahs -r hot-spare-pool-name current-hot-spare replacement-hot-spare
      -r

      Specifies to replace disks in the hot spare pool named.

      hot-spare-pool

      Is the name of the hot spare pool, or the special keyword all to change all hot spare pool associations.

      current-hot-spare

      Is the name of the current hot spare that will be replaced.

      replacement-hot-spare

      Is the name of the slice to take the place of the current hot spare in the named pools.

      See the metahs(1M) man page for more information.

Example 17–9 Replacing a Hot Spare in One Hot Spare Pool


# metastat hsp003
hsp003: 1 hot spare
        c0t2d0s2                Broken       5600 blocks
# metahs -r hsp003 c0t2d0s2 c3t1d0s2
hsp003: Hotspare c0t2d0s2 is replaced with c3t1d0s2

In this example, the metastat command makes sure that the hot spare is not in use. The metahs -r command replaces hot spare /dev/dsk/c0t2d0s2 with /dev/dsk/c3t1d0s2 in the hot spare pool hsp003.

Example 17–10 Replacing a Hot Spare in All Associated Hot Spare Pools


# metahs -r all c1t0d0s2 c3t1d0s2
hsp001: Hotspare c1t0d0s2 is replaced with c3t1d0s2
hsp002: Hotspare c1t0d0s2 is replaced with c3t1d0s2
hsp003: Hotspare c1t0d0s2 is replaced with c3t1d0s2

In this example, the keyword all replaces hot spare /dev/dsk/c1t0d0s2 with /dev/dsk/c3t1d0s2 in all its associated hot spare pools.

ProcedureHow to Delete a Hot Spare From a Hot Spare Pool

Steps

  1. Verify whether the hot spare is currently being used by using one of the following methods:

    • From the Enhanced Storage tool within the Solaris Management Console, open the Hot Spare Pools node and select a hot spare pool. Choose Action->Properties, then choose the Hot Spares panel and follow the instructions. For more information, see the online help.

    • Use the following form of the metastat command:


      metastat hot-spare-pool-name

      See the metastat(1M) man page.

  2. To delete the hot spare, use one of the following methods:

    • From the Enhanced Storage tool within the Solaris Management Console, open the Hot Spare Pools node and select a hot spare pool. Choose Action->Properties, then choose the Hot Spares panel and follow the instructions. For more information, see the online help.

    • Use the following form of the metahs command:


      metahs -d hot-spare-pool-name current-hot-spare
      -d

      Specifies to delete a hot spare from the hot spare pool named.

      hot-spare-pool

      Is the name of the hot spare pool, or the special keyword all to delete from all hot spare pools.

      current-hot-spare

      Is the name of the current hot spare that will be deleted.

      See the metahs(1M) man page for more information.

Example 17–11 Deleting a Hot Spare from One Hot Spare Pool


# metastat hsp003
hsp003: 1 hot spare
        c0t2d0s2                Broken       5600 blocks
# metahs -d hsp003 c0t2d0s2

In this example, the metastat command makes sure that the hot spare is not in use. The metahs -d command deletes hot spare /dev/dsk/c0t2d0s2 in the hot spare pool hsp003.

ProcedureHow to Enable a Hot Spare

Step

    To return a hot spare to the “available” state, use one of the following methods:

    • From the Enhanced Storage tool within the Solaris Management Console, open the Hot Spare Pools node and select a hot spare pool. Choose Action->Properties, then the Hot Spares panel and follow the instructions. For more information, see the online help.

    • Use the following form of the metahs command:


      metahs -e hot-spare-slice
      -e

      Specifies to enable a hot spare.

      hot-spare-slice

      Is the name of the slice to enable.

      For more information, see the metahs(1M) man page.

Example 17–12 Enabling a Hot Spare


# metahs -e c0t0d0s2

In this example, the command places the hot spare /dev/dsk/c0t0d0s2 in the “Available” state after it has been repaired. It is unnecessary to specify a hot spare pool.