environment

Use the environment command to display a snapshot of server environmental status, such as temperatures, power supply status, front panel LED status, keyswitch position, and so forth. The display uses similar format to that used for the UNIX command prtdiag(1m). For example:

rsc> environment
                

==================== Environmental Status ====================


System Temperatures (Celsius):
------------------------------
      CPU0    42
      CPU1    52
       MB0    33
       MB1    27
       PDB    29
      SCSI    25

=================================
Front Status Panel:
-------------------

Keyswitch position is in On mode.

System LED Status:  DISK ERROR      POWER 
                      [OFF]         [ ON]      
                POWER SUPPLY ERROR  ACTIVITY 
                      [OFF]         [ ON]      
                    GENERAL ERROR   THERMAL ERROR  
                      [OFF]         [OFF]      

=================================


Disk LED Status:    OK = GREEN  ERROR = YELLOW
        DISK  5: [EMPTY]    DISK  3: [EMPTY]    DISK  1:    [OK]
        DISK  4: [EMPTY]    DISK  2:    [OK]    DISK  0:    [OK]

=================================


Fan Bank:
---------

Bank      Speed     Status
         (0-255)    
----      -----     ------
 SYS       151        OK

=================================


Power Supplies:
---------------

Supply     Status
------     ------
  0          OK  
  1          OK  

=================================

rsc>