Preface

The Sun Cluster 3.1 - 3.2 With Sun StorEdge T3 or T3+ Array Manual for Solaris OS provides procedures specific to Sun StorEdge^TM T3 or T3+ arrays in single-controller and partner-group configurations when placed in a Sun^TM Cluster environment.

Use this manual with any version of Sun Cluster 3.1 or 3.2 software. Unless otherwise noted, procedures are the same for all Sun Cluster versions. See the Revision History for a list of changes to this manual.

Who Should Use This Book

This book is for Sun representatives who are performing the initial installation of a Sun Cluster configuration and for system administrators who are responsible for maintaining the system.

This document is intended for experienced system administrators with extensive knowledge of Sun software and hardware. Do not use this document as a planning or a pre-sales guide. You should have already determined your system requirements and purchased the appropriate equipment and software before reading this document.

How This Book Is Organized

This book contains the following chapters.

Chapter 1, Installing and Configuring a Sun StorEdge T3 or T3+ Array discusses how to install and configure the StorEdge T3 and T3+ storage array.

Chapter 2, Maintaining and Upgrading a Sun StorEdge T3 or T3+ Array discusses how to maintain the StorEdge T3 and T3+ storage array.

Revision History

The following table lists the information that has been revised or added since the initial release of this documentation. The table also lists the revision date for these changes.

Table P–1 Sun Cluster 3.1 - 3.2 With Sun StorEdge T3 or T3+ Array Manual for Solaris OS

Revision Date	New Information
March 2008	Changed the procedure in How to Add a Storage Array to an Existing Cluster, Using a Partner-Group Configuration so that you do not perform a reconfiguration boot.
January 2009	Updates links to Sun Cluster documentation in Preface.

Related Documentation

The following books provide conceptual information or procedures to administer hardware and applications. If you plan to use this documentation in a hardcopy format, ensure that you have these books available for your reference.

The following Sun Cluster books support the Sun Cluster 3.1 and 3.2 releases. If you are maintaining a different version of Sun Cluster software, refer to the appropriate documentation. All Sun Cluster documentation is available at http://docs.sun.com. Documentation that is not available at http://docs.sun.com is listed with the appropriate URL.

Table P–2 Hardware Documentation

Title	Part Number
Sun StorEdge Traffic Manager Installation and Configuration Guide Available on http://www.sun.com/products-n-solutions/hardware/docs	816-1420
Sun StorEdge T3 and T3+ Array Configuration Guide Available on http://www.sun.com/products-n-solutions/hardware/docs	816-4771
Sun StorEdge T3 and T3+ Array Installation, Operation, and Service Manual Available on http://www.sun.com/products-n-solutions/hardware/docs	816-0773
Sun StorEdge T3 and T3+ Array Release Notes Available on http://www.sun.com/products-n-solutions/hardware/docs	816-3652
Sun StorEdge T3 Array Controller Upgrade Manual Available on http://www.sun.com/products-n-solutions/hardware/docs	816-0780

Table P–3 Sun Cluster Documentation

Documentation
Solaris Cluster 3.2
Sun Cluster 3.1

Using UNIX Commands

This document contains information about commands that are used to install, configure, or upgrade a Sun Cluster configuration. This document might not contain complete information about basic UNIX® commands and procedures such as shutting down the system, booting the system, and configuring devices.

See one or more of the following sources for this information:

• Online documentation for the Solaris^TM Operating System (Solaris OS)

• Other software documentation that you received with your system

• Solaris Operating System man pages

Getting Help

If you have problems installing or using Sun Cluster, contact your service provider and provide the following information.

• Your name and email address (if available)

• Your company name, address, and phone number

• The model number and serial number of your systems

• The release number of the operating environment (for example, Solaris 10)

• The release number of Sun Cluster (for example, Sun Cluster 3.2)

Use the following commands to gather information about your system for your service provider.

Command	Function
prtconf -v	Displays the size of the system memory and reports information about peripheral devices
psrinfo -v	Displays information about processors
showrev -p	Reports which patches are installed
prtdiag -v	Displays system diagnostic information
/usr/cluster/bin/clnode show-rev/usr/cluster/bin/scinstall -pv	Displays Sun Cluster release and package version information

Also have available the contents of the /var/adm/messages file.

Documentation, Support, and Training

The Sun web site provides information about the following additional resources:

• Documentation

• Support

• Training

Typographic Conventions

The following table describes the typographic conventions that are used in this book.

Table P–4 Typographic Conventions

Typeface	Meaning	Example
AaBbCc123	The names of commands, files, and directories, and onscreen computer output	Edit your .login file. Use ls -a to list all files. machine_name% you have mail.
AaBbCc123	What you type, contrasted with onscreen computer output	machine_name% su Password:
aabbcc123	Placeholder: replace with a real name or value	The command to remove a file is rm filename.
AaBbCc123	Book titles, new terms, and terms to be emphasized	Read Chapter 6 in the User's Guide. A cache is a copy that is stored locally. Do not save the file. Note: Some emphasized items appear bold online.

Shell Prompts in Command Examples

The following table shows the default UNIX system prompt and superuser prompt for the C shell, Bourne shell, and Korn shell.

Table P–5 Shell Prompts

Shell	Prompt
C shell	machine_name%
C shell for superuser	machine_name#
Bourne shell and Korn shell	$
Bourne shell and Korn shell for superuser	#