Listing of sczbt_config

#
# Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
# ident	"@(#)sczbt_config	1.1	06/02/22 SMI"
#
# This file will be sourced in by sczbt_register and the parameters
# listed below will be used.
#
# These parameters can be customized in (key=value) form
#
#               RS - Name of the resource
#               RG - Name of the resource group containing RS
#     PARAMETERDIR - Name of the parameter file direcrory
#       SC_NETWORK - Identfies if SUNW.LogicalHostname will be used
#			true = zone will use SUNW.LogicalHostname 
#	               false = zone will use it's own configuration 
#
#	The configuration of a zone's network addresses depends on
#	  whether you require IPMP protection or protection against
#	  the failure of all physical interfaces.
#
#	If you require only IPMP protection, configure the zone's 
#	  addresses by using the zonecfg utility and then place the
#	  zone's address in an IPMP group. 
#
#	  	To configure this option set 
#		  SC_NETWORK=false
#		  SC_LH=
#
#	If IPMP protection is not required, just configure the 
#	  zone's addresses by using the zonecfg utility. 
#
#	  	To configure this option set 
#		  SC_NETWORK=false
#		  SC_LH=
#
#	If you require protection against the failure of all physical
#	  interfaces, choose one option from the following list. 
#
#	- If you want the SUNW.LogicalHostName resource type to manage
#	    the zone's addresses, configure a SUNW.LogicalHostName
#	    resource with at least one of the zone's addresses. 
#	
#	  	To configure this option set 
#		  SC_NETWORK=true
#		  SC_LH=<Name of the SC Logical Hostname resource>
#
#	- Otherwise, configure the zone's addresses by using the 
#	    zonecfg utility and configure a redundant IP address
#	    for use by a SUNW.LogicalHostName resource. 
#
#	  	To configure this option set 
#		  SC_NETWORK=false
#		  SC_LH=<Name of the SC Logical Hostname resource>
#
#	Whichever option is chosen, multiple zone addresses can be 
# 	  used either in the zone's configuration or using several
#	  SUNW.LogicalHostname resources.
#
#	   e.g.	SC_NETWORK=true
#	  	SC_LH=zone1-lh1,zone1-lh2
#
#            SC_LH - Name of the SC Logical Hostname resource
#         FAILOVER - Identifies if the zone's zone path is on a 
#                      highly available local file system
#
#	  e.g.	FAILOVER=true - highly available local file system
#	  	FAILOVER=false - local file system
#
#           HAS_RS - Name of the HAStoragePlus SC resource
#

RS=
RG=
PARAMETERDIR=
SC_NETWORK=
SC_LH=
FAILOVER=
HAS_RS=

#
# The following variable will be placed in the parameter file
#
# Parameters for sczbt (Zone Boot)
#
# Zonename      Name of the zone
# Zonebootopt   Zone boot options 
# Milestone     SMF Milestone which needs to be online 
#                before the zone is considered booted
# Mounts 	Mounts is a list of directories and their mount options, 
#		which are loopback mounted from the global zone into the 
#		newly booted zone. The mountpoint in the local zone can 
#		be different to the mountpoint from the global zone.
#
#		The Mounts parameter format is as follows,
#
#		Mounts="/<global zone directory>:/<local zone directory>:<mount options>"
#
#		The following are valid examples for the "Mounts" variable
#
#		Mounts="/globalzone-dir1:/localzone-dir1:rw"
#		Mounts="/globalzone-dir1:/localzone-dir1:rw /globalzone-dir2:rw"
#
#		The only required entry is the /<global zone directory>, the
#		/<local zone directory> and <mount options> can be omitted.
#
#		Omitting /<local zone directory> will make the local zone mountpoint
#		the same as the global zone directory.
#
#		Omitting <mount options> will not provide any mount options except
#		the default options from the mount command.
#	
#		Note: You must manually create any local zone mountpoint directories that 
#		will be used within the Mounts variable, before registering this resource
#		within Sun Cluster.
#
# Note:	Zonebootopt="-s" requires Milestone=single-user
#

Zonename=
Zonebootopt=
Milestone=multi-user-server
Mounts=