Index (Sun Cluster Software Installation Guide for Solaris OS)

Sun Cluster Software Installation Guide for Solaris OS


A

	adapters
		local MAC address
			NIC support ( )
			required setting ( )
		SBus SCI restriction ( )
		SCI-PCI
			installing Solaris packages ( ) ( )
			installing Sun Cluster packages ( )
			installing Sun Cluster packages with JumpStart ( )
			package requirements ( )
		tagged VLAN
			cluster interconnect guidelines ( )
			public network guidelines ( )

	adding
		See also configuring
		See also installing
		cluster file system mount points to new nodes ( )
		drives to a disk set ( )
		mediator hosts ( )
		nodes to the Sun Cluster module to Sun Management Center ( )

	administrative console
		installing CCP software ( )
		IP addresses ( )
		`MANPATH` ( )
		`PATH` ( )

	alternate boot path, displaying ( )

	applications, installing on a cluster file system ( )

	authentication, See authorized-node list

	authorized-node list
		adding nodes ( )
		removing nodes ( )

	`autoboot` property ( )

	automatic power-saving shutdown, restriction ( )

	automatic reboot on disk-path failures
		enabling ( )
		verifying ( )

	`autoscinstall.class` file ( )


B

	boot devices, alternate boot path ( )

	booting, into noncluster mode ( )


C

	`cconsole` command ( )
		installing the software ( )
		using ( ) ( )

	`ccp` command ( )

	`ce_taskq_disable` variable ( )

	changing
		private hostnames ( )
		private IP address range ( )

	`claccess` command
		adding nodes to the authorized-node list ( )
		removing nodes from the authorized-node list ( )

	`class` file, modifying ( )

	`cldevice` command
		determining device-ID names ( )
		updating the global-devices namespace ( )
		verifying command processing ( )

	`cldevicegroup` command
		enabling the `localonly` property ( ) ( ) ( ) ( )
		removing nodes from raw-disk device groups ( ) ( ) ( ) ( ) ( )
		verifying disk-group configurations ( )

	`clnode` command
		moving resource groups and device groups ( )
		viewing private hostnames ( )

	`clquorumserver` command, starting the quorum server ( )

	`clsetup` command
		adding cluster interconnects ( )
		changing private hostnames ( )
		postinstallation setup ( )
		registering device groups ( )

	`cluster` command
		adding nodes ( )
		creating new clusters ( )
		verifying installation mode ( )

	Cluster Control Panel (CCP) software
		installing ( )
		starting ( )

	cluster file systems
		See also shared file systems
		adding to a new node ( )
		caution notice ( )
		configuring ( )
		installing applications ( )
		LOFS restriction ( )
		mount options ( )
		planning ( ) ( )
		restrictions
			communication end-points ( )
			`fattach` command ( )
			`forcedirectio` ( )
			LOFS ( )
			quotas ( )
			VxFS ( )
		verifying the configuration ( )

	cluster interconnects
		changing the private IP address range ( )
		configuring on a single-node cluster ( )
		planning ( )

	cluster name ( )

	cluster nodes
		adding nodes
			by using an XML file ( )
			by using JumpStart ( )
			by using `scinstall` ( )
			updating quorum devices with new nodes ( )
		adding to the Sun Cluster module to Sun Management Center ( )
		creating the cluster
			by using an XML file ( )
			by using JumpStart ( )
			by using `scinstall` ( )
		determining the node-ID number ( )
		planning ( )
		verifying
			installation mode ( )
			status ( ) ( ) ( ) ( )

	`clusters` file, administrative console ( )

	`clvxvm` command, installing VxVM ( )

	common agent container, enabling the daemon ( )

	communication end-points, restriction on cluster file systems ( )

	configuring
		additional nodes
			by using an XML file ( )
			by using JumpStart ( )
			by using `scinstall` ( )
			by using SPS Sun Cluster plug-in ( )
		cluster file systems ( )
		cluster interconnects on a single-node cluster ( )
		disk sets ( )
		IPMP groups ( )
		local disk groups ( )
		`md.tab` file ( )
		multipathing software ( )
		Network Time Protocol (NTP) ( )
		new clusters
			by using an XML file ( )
			by using JumpStart ( )
			by using `scinstall` ( )
			by using SPS Sun Cluster plug-in ( )
		non-global zones ( )
		quorum devices ( )
		Quorum Server software ( )
		quorum servers ( )
		Solaris IP Filter ( )
		Solaris Volume Manager ( )
		state database replicas ( )
		user work environment ( )
		VERITAS Volume Manager (VxVM) ( )

	console-access devices
		IP addresses ( )
		planning ( )
		serial-port numbers ( )

	CVM, See VERITAS Volume Manager (VxVM) cluster feature


D

	data services
		installing ( )
			by using SPS Sun Cluster plug-in ( )

	deporting device groups ( )

	device groups
		See also disk groups
		See also raw-disk device groups
		deporting ( )
		importing ( )
		moving ( )
		planning ( )
		registering changes to ( )
		registering disk groups as ( )
		reminoring ( )
		replicated disks ( )
		setting the replication property ( )
		status ( )
		verifying registration ( )

	device-ID names, determining ( )

	Dirty Region Logging (DRL), planning ( )

	disabling
		installation mode ( )
		LOFS ( ) ( ) ( ) ( )
		NTP daemon ( )

	disk device groups, See device groups

	disk drives, See drives

	disk groups
		See also device groups
		configuring ( )
		description of types ( )
		registering as device groups ( )
		verifying the configuration ( )

	disk-path failures
		enabling automatic reboot ( )
		verifying enabled automatic reboot ( )

	disk sets
		adding drives ( )
		configuring ( )
		planning the maximum number ( )
		repartitioning drives ( )
		setting the maximum number ( )

	disk strings, dual-string mediator requirements ( )

	disks, See drives

	disksets, See disk sets

	domain console network interfaces, IP addresses ( )

	drives
		adding to disk sets ( )
		mirroring differing device sizes ( )
		repartitioning ( )

	DRL, planning ( )

	dual-string mediators
		adding hosts ( )
		overview ( )
		planning ( )
		repairing data ( )
		status ( )

	Dynamic Multipathing (DMP) ( )


E

	enabling
		automatic reboot on disk-path failures ( )
		common agent container daemon ( )
		kernel cage ( )
		LOFS requirements ( )
		multipathing ( )
		NTP ( )
		remote access ( )

	encapsulated root disks
		configuring ( )
		mirroring ( )
		planning ( )
		unconfiguring ( )

	Enclosure-Based Naming, planning ( )

	error messages
		cluster ( )
		`metainit` command ( )
		NTP ( )

	establishing a new cluster, by using an XML file ( )

	`/etc/clusters` file ( )

	`/etc/inet/hosts` file
		configuring ( ) ( )
		planning ( )

	`/etc/inet/ipnodes` file, configuring ( )

	`/etc/inet/ntp.conf.cluster` file
		configuring ( )
		starting NTP ( )
		stopping NTP ( )

	`/etc/inet/ntp.conf` file
		configuring ( )
		starting NTP ( )
		stopping NTP ( )

	`/etc/init.d/xntpd.cluster` command, starting NTP ( )

	`/etc/init.d/xntpd` command
		starting NTP ( )
		stopping NTP ( )

	`/etc/lvm/md.tab` file ( )

	`/etc/name_to_major` file
		non-VxVM nodes ( ) ( )
		VxVM–installed nodes ( )

	`/etc/nsswitch.conf file`, non-global zone modifications ( )

	`/etc/serialports` file ( )

	`/etc/system` file
		`ce` adapter setting ( )
		`kernel_cage_enable` variable ( )
		LOFS setting ( ) ( ) ( ) ( )
		stack-size setting ( )
		thread stack-size setting ( )

	`/etc/vfstab` file
		adding mount points ( )
		verifying the configuration ( )

	examples
		activating volumes in the `md.tab` file ( )
		adding drives to a disk set ( )
		adding mediator hosts ( )
		assigning a minor number to a device group ( )
		configuring Sun Cluster software on additional nodes
			by using `scinstall` ( )
		configuring Sun Cluster software on all nodes
			by using an XML file ( )
			by using `scinstall` ( )
		creating a cluster file system ( )
		creating a disk set ( )
		creating state database replicas ( )
		`md.tab` file ( )
		mirroring file systems that can be unmounted ( )
		mirroring file systems that cannot be unmounted ( )
		mirroring the encapsulated root disk ( )
		mirroring the global devices namespace ( )
		mirroring the root (`/`) file system ( )
		unloading the RSMRDT driver ( )
		updating SCSI quorum devices after adding a node ( )

	`explorer` command ( )


F

	failover file system, See highly available local file system

	`fattach` command, restriction on cluster file systems ( )

	file–system logging, planning ( )

	`finish` script, JumpStart ( )

	`forcedirectio` command, restriction ( )


G

	global devices
		caution notice ( )
		`/global/.devices/` directory
			mirroring ( )
			`node@nodeid` file system ( )
		`/globaldevices` partition
			creating ( )
			planning ( )
		planning ( )
		updating the namespace ( )

	`/global` directory ( )

	global file systems
		See cluster file systems

	global zones, See Solaris zones


H

	hardware RAID, internal disk mirroring ( )

	help ( )

	high-priority processes, restriction ( )

	`hosts` file
		configuring ( ) ( )
		planning ( )

	hot spare disks, planning ( )


I

	importing device groups ( )

	initialization files ( )

	installation mode
		disabling ( )
		verifying ( )

	installing
		See also adding
		See also configuring
		Cluster Control Panel (CCP) ( )
		data services ( )
			by using SPS Sun Cluster plug-in ( )
		in zones ( )
		man pages ( )
		multipathing software ( )
		Quorum Server software ( )
		RSMAPI
			Solaris packages ( ) ( )
			Sun Cluster packages ( ) ( )
			Sun Cluster packages with JumpStart ( )
		RSMRDT drivers
			Solaris packages ( ) ( )
			Sun Cluster packages ( )
			Sun Cluster packages with JumpStart ( )
		SCI-PCI adapters
			Solaris packages ( )
			Sun Cluster packages ( )
			Sun Cluster packages with JumpStart ( )
		Solaris software
			alone ( )
			with Sun Cluster software ( )
		Sun Cluster Geographic Edition ( )
		Sun Cluster Manager ( )
		Sun Cluster software
			by using SPS Sun Cluster plug-in ( )
			packages ( )
			verifying ( )
		Sun Management Center
			requirements ( )
			Sun Cluster module ( )
		Sun StorEdge QFS software ( )
		Sun StorEdge Traffic Manager ( )
		VERITAS File System (VxFS) ( )
		VERITAS Volume Manager (VxVM) ( ) ( )

	integrated mirroring ( )

	internal hardware disk mirroring ( )

	IP addresses
		adding to a naming service ( )
		changing the private IP address range ( )
		planning the private network ( )
		planning the public network ( )

	IP Filter, See Solaris IP Filter

	IP network multipathing (IPMP) groups, automatic creation during installation ( )

	IPMP groups
		See IP network multipathing (IPMP) groups
		configuring ( )

	`ipnodes` file, configuring ( )

	IPv6 addresses
		private network restriction ( ) ( )
		public network use ( )


J

	Java ES, removing the Sun Cluster entry ( )

	JumpStart
		`class` file ( )
		`finish` script ( )
		installing Solaris and Sun Cluster software ( )
		troubleshooting installation ( )

	junctions, See switches


K

	`kernel_cage_enable` variable ( )

	`/kernel/drv/md.conf` file ( )
		caution notice ( ) ( )
		configuring ( )

	`/kernel/drv/scsi_vhci.conf` file ( )


L

	licenses, planning ( )

	loading the Sun Cluster module to Sun Management Center ( )

	local disk groups
		configuring ( )
		description ( )

	local MAC address
		NIC support ( )
		required setting ( )

	local volumes
		unique name requirement ( ) ( )

	LOFS
		disabling ( ) ( ) ( ) ( )
		restriction ( ) ( )

	log files, Sun Cluster installation ( )

	logging for cluster file systems, planning ( )

	logical addresses, planning ( )

	logical network interfaces, restriction ( )

	loopback file system (LOFS)
		disabling ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )
		restriction ( ) ( )


M

	man pages, installing ( )

	`MANPATH`
		administrative console ( )
		cluster nodes ( )

	`md.conf` file
		caution notice ( )
		configuring ( )
		planning ( )

	`md_nsets` field
		configuring ( )
		planning ( )

	`md.tab` file, configuring ( )

	mediators, See dual-string mediators

	`messages` files, cluster ( )

	minor-number conflicts, repairing ( )

	mirroring
		differing device sizes ( )
		global devices namespace ( )
		internal disks ( )
		multihost disks ( )
		planning ( )
		root (`/`) file system ( )
		root disks ( )
			caution notice ( )
			planning ( )
		troubleshooting ( )

	mount options for cluster file systems
		requirements ( )
		UFS ( )
		VxFS ( ) ( )

	mount points
		adding to new nodes ( )
		cluster file systems ( )
		modifying the `/etc/vfstab` file ( )
		nested ( )

	`mpxio-disable` parameter ( )

	multi-user services
		verifying ( ) ( ) ( ) ( ) ( )

	multihost disks
		mirroring ( )
		planning ( )

	multipathing software
		enabling ( )
		installing ( )
		troubleshooting installation ( )

	multiported disks, See multihost disks


N

	`name_to_major` file
		non-VxVM nodes ( ) ( )
		VxVM–installed nodes ( )

	naming conventions
		cluster ( )
		cluster nodes ( )
		local volumes ( )
		private hostnames ( )
		raw-disk devices ( )
		tagged VLAN adapters ( )
		zones ( )

	naming service, adding IP address mappings ( )

	NAS devices, configuring as quorum devices ( )

	Network Appliance NAS devices, configuring as quorum devices ( )

	Network File System (NFS)
		See also Sun Cluster HA for NFS
		guidelines for cluster nodes ( )

	Network Time Protocol (NTP)
		configuring ( )
		error messages ( )
		starting ( )
		stopping ( )

	NFS, See Network File System (NFS)

	NIS servers, restriction for cluster nodes ( )

	`nmd` field, configuring ( )

	node lists
		device groups ( )
		raw-disk device groups
			removing nodes from ( )
			viewing ( )

	nodes, See cluster nodes

	non-global zones
		See Solaris zones
		`nsswitch.conf` file modifications ( )

	noncluster mode, booting into ( )

	`nsswitch.conf file`, non-global zone modifications ( )

	NTP
		configuring ( )
		error messages ( )
		starting ( )
		stopping ( )

	`ntp.conf.cluster` file
		configuring ( )
		starting NTP ( )
		stopping NTP ( )

	`ntp.conf` file
		configuring ( )
		starting NTP ( )
		stopping NTP ( )


O

	`/opt/SUNWcluster/bin/` directory ( )

	`/opt/SUNWcluster/bin/cconsole` command ( )
		installing the software ( )
		using ( ) ( )

	`/opt/SUNWcluster/bin/ccp` command ( )

	`/opt/SUNWcluster/man/` directory ( )

	Oracle Parallel Server, See Oracle RAC


P

	package installation
		Cluster Control Panel (CCP) software ( )
		data services ( )
			by using SPS Sun Cluster plug-in ( )
		RSMAPI ( )
		RSMRDT drivers ( ) ( )
		SCI-PCI adapters ( )
		Sun Cluster man pages ( )
		Sun Cluster software ( )

	partitions
		`/globaldevices` ( ) ( )
		repartitioning drives ( )
		root (`/`) file system ( )
		`swap` ( )
		volume manager ( )

	patches, planning ( )

	`PATH`
		administrative console ( )
		cluster nodes ( )

	PCI adapters, See SCI-PCI adapters

	ports, See serial ports

	private hostnames
		changing ( )
		planning ( )
		verifying ( )

	private network
		changing the IP address range ( )
		IPv6 address restriction ( )
		planning ( )

	profile, JumpStart ( )

	public network
		adding IP addresses to a naming service ( )
		IPv6 support ( )
		planning ( )


Q

	QFS, See Sun StorEdge QFS software

	quorum devices
		caution notice ( )
		initial configuration ( )
		and mirroring ( )
		NAS devices ( )
		planning ( )
		quorum servers ( )
		restriction for replicated devices ( )
		SCSI protocol setting ( )
		troubleshooting configuration ( )
		updating after adding a node ( )
		verifying ( )
		ZFS restriction ( )

	quorum server, requirements as a quorum device ( )

	quorum servers
		configuring ( )
		configuring as quorum devices ( )
		`/etc/scqsd/scqsd.conf` file ( )
		guidelines ( )
		installation directory ( )
		installing Quorum Server software ( )
		packages installed ( )
		removing ( )
		starting ( )
		troubleshooting ( )
		uninstalling ( )

	quotas, restriction on cluster file systems ( )


R

	RAID, restriction ( )

	`raidctl` command ( )

	`rarpd` service, restriction for cluster nodes ( )

	raw-disk device groups
		See also device groups
		removing nodes from node lists ( )
		viewing node lists ( )

	raw-disk devices, naming conventions ( )

	rebooting, into noncluster mode ( )

	recovering, unsuccessful cluster node creation ( )

	registering VxVM device groups ( )

	Remote Shared Memory Application Programming Interface (RSMAPI)
		package requirements ( )
		Solaris packages
			installing by using JumpStart ( )
			installing by using `pkgadd` ( )
		Sun Cluster packages
			installing by using JumpStart ( ) ( )
			installing by using `pkgadd` ( )

	removing
		See also uninstalling
		Java ES product registry ( )
		Sun Cluster software ( )

	removing quorum servers ( )

	repairing
		mediator data ( )
		minor-number conflicts ( )

	replicated devices
		disk requirement ( )
		restriction as quorum devices ( )
		setting the replication property ( )

	resource groups, moving ( )

	root (`/`) file system, mirroring ( )

	root disk groups
		configuring
			on encapsulated root disks ( )
			on nonroot disks ( )
		planning ( )
		simple ( )
		unconfiguring encapsulated root disks ( )

	root disks
		encapsulating ( )
		internal disk mirroring ( )
		mirroring ( )
			caution notice ( )
			planning ( )
		unencapsulating ( )

	root environment, configuring ( )

	`rootdg`, See root disk groups

	routers, restriction for cluster nodes ( )

	RPC service, restricted program numbers ( )

	`rpcmod` settings ( )

	RSMAPI, See Remote Shared Memory Application Programming Interface (RSMAPI)

	RSMRDT drivers
		installing
			Solaris packages ( )
			Sun Cluster packages ( )
			Sun Cluster packages with JumpStart ( )
		package installation ( )
		requirements ( )
		Solaris packages ( )
		troubleshooting unloading ( )
		uninstalling ( )
		unloading ( )


S

	SBus SCI adapters, restriction ( )

	`sccheck` command, `vfstab` file check ( )

	SCI-PCI adapters
		package requirements ( )
		Solaris packages
			installing by using JumpStart ( )
			installing by using `pkgadd` ( )
		Sun Cluster packages
			installing by using JumpStart ( ) ( )
			installing by using `pkgadd` ( )

	`scinstall` command
		adding nodes ( )
		adding nodes by using JumpStart ( )
		creating the cluster ( )
		creating the cluster by using JumpStart ( )
		unconfiguring Sun Cluster software ( )

	SCSI devices
		correcting reservations after adding a third node ( )
		installing quorum devices ( )
		protocol setting in quorum devices ( )

	SCSI fencing protocol, quorum devices ( )

	secondary root disks ( )

	serial ports
		configuring on the administrative console ( )
		Simple Network Management Protocol (SNMP) ( )

	`serialports` file ( )

	Service Management Facility (SMF)
		verifying online services ( ) ( ) ( ) ( ) ( )

	shared disk groups, description ( )

	Simple Network Management Protocol (SNMP), port for Sun Management Center ( )

	SMF
		verifying online services ( ) ( ) ( ) ( ) ( )

	SNMP, port for Sun Management Center ( )

	software RAID, restriction ( )

	Solaris IP Filter
		configuring ( )
		guidelines ( )
		restrictions ( )

	Solaris software
		installing
			alone ( )
			with Sun Cluster software ( )
		planning ( )
			`/globaldevices` file system ( )
			partitions ( )
			root (`/`) file system ( )
			software groups ( )
			volume managers ( )
		restrictions
			automatic power-saving shutdown ( )
			interface groups ( )
			Solaris IP Filter ( )
			zones ( )

	Solaris Volume Manager
		coexistence with VxVM ( )
		configuring ( )
		disk sets
			adding drives ( )
			configuring ( )
			repartitioning drives ( )
			setting the maximum number ( )
		dual-string mediators
			adding hosts ( )
			overview ( )
			repairing bad data ( )
			status ( )
		error messages ( )
		`md.tab` file ( )
		mediators
			See dual-string mediators
		mirroring
			global devices namespace ( )
			root (`/`) file system ( )
			root disks ( )
		planning ( )
		raw-disk device names ( )
		state database replicas ( )
		volumes
			activating ( )
			planning the maximum number ( )
			setting the maximum number ( )

	Solaris zones
		`autoboot` property ( )
		configuring ( )
		guidelines ( )
		installation requirements ( )
		LOFS coexistence with Sun Cluster HA for NFS ( )
		LOFS requirement ( )
		naming conventions ( )

	SPS, See Sun N1 Service Provisioning System

	SSP, See console-access devices

	stack-size setting ( ) ( )

	starting
		Cluster Control Panel (CCP) ( )
		quorum servers ( )
		Sun Management Center ( )

	state database replicas, configuring ( )

	status
		device groups ( )
		dual-string mediators ( )
		verifying ( )

	Sun Cluster Geographic Edition, installing ( )

	Sun Cluster HA for NFS
		restriction with LOFS ( ) ( )

	Sun Cluster Manager
		See also SunPlex Manager
		installing ( )
		required packages ( )

	Sun Cluster module to Sun Management Center ( )
		adding nodes ( )
		installing ( )
		loading ( )
		requirements ( ) ( )

	Sun Enterprise 10000 servers
		dynamic reconfiguration support ( )
		`kernel_cage_enable` variable ( )
		`serialports` file ( )

	Sun Fire 15000 servers
		IP addresses ( )
		serial-port numbers ( )

	Sun Management Center
		installation requirements ( )
		starting ( )
		Sun Cluster module ( )
			adding nodes ( )
			installing ( )
			loading ( )

	Sun N1 Service Provisioning System, Sun Cluster plug-in ( )

	Sun NAS devices, configuring as quorum devices ( )

	Sun StorEdge QFS software, installing ( )

	Sun StorEdge Traffic Manager software
		enabling ( )
		installing ( )
		troubleshooting installation ( )

	SunPlex Manager
		See also Sun Cluster Manager
		uninstalling ( )

	`swap`, planning ( )

	switches, See transport switches

	system controllers (SC), See console-access devices

	`system` file
		`kernel_cage_enable` variable ( )
		stack-size setting ( )
		thread stack-size setting ( )

	System Service Processor (SSP), See console-access devices


T

	tagged VLAN adapters
		cluster interconnect guidelines ( )
		public network guidelines ( )

	technical support ( )

	`telnet` command, serial-port numbers ( )

	terminal concentrators (TC), See console-access devices

	thread stack-size setting ( )

	three-way mirroring ( )

	Traffic Manager software
		enabling ( )
		installing ( )
		troubleshooting installation ( )

	transport adapters, See adapters

	transport junctions, See transport switches

	transport switches, planning ( )

	troubleshooting
		adding nodes to the Sun Cluster module to Sun Management Center ( )
		configuring
			additional nodes ( )
			new clusters ( )
			quorum devices ( )
		`explorer` baseline record of the configuration ( )
		installing multipathing software ( )
		JumpStart installation ( )
		local VxVM disk groups ( )
		mirroring root file systems ( ) ( )
		quorum server installation ( )
		Sun StorEdge Traffic Manager installation ( )
		unloading the RSMRDT driver ( )


U

	UFS logging, planning ( )

	unconfiguring Sun Cluster software ( )

	unencapsulating the root disk ( )

	uninstalling
		See also removing
		RSMRDT package ( )
		SunPlex Manager ( )

	uninstalling quorum servers ( )

	user-initialization files, modifying ( )

	`/usr/cluster/bin/` directory ( )

	`/usr/cluster/bin/claccess` command
		adding nodes to the authorized-node list ( )
		removing nodes from the authorized-node list ( )

	`/usr/cluster/bin/cldevice` command
		determining device-ID names ( )
		updating the global-devices namespace ( )
		verifying command processing ( )

	`/usr/cluster/bin/cldevicegroup` command
		enabling the `localonly` property ( ) ( ) ( ) ( )
		removing nodes from raw-disk device groups ( ) ( ) ( ) ( ) ( )
		verifying disk-group configurations ( )

	`/usr/cluster/bin/clnode` command
		moving resource groups and device groups ( )
		viewing private hostnames ( )

	`/usr/cluster/bin/clquorumserver` command, starting the quorum server ( )

	`/usr/cluster/bin/clsetup` command
		adding cluster interconnects ( )
		changing private hostnames ( )
		postinstallation setup ( )
		registering device groups ( )

	`/usr/cluster/bin/cluster` command
		adding nodes ( )
		creating new clusters ( )
		verifying installation mode ( )

	`/usr/cluster/bin/clvxvm` command, installing VxVM ( )

	`/usr/cluster/bin/sccheck` command, `vfstab` file check ( )

	`/usr/cluster/bin/scinstall` command
		adding nodes ( )
		adding nodes by using JumpStart ( )
		creating the cluster ( )
		creating the cluster by using JumpStart ( )
		unconfiguring Sun Cluster software ( )

	`/usr/cluster/man/` directory ( )


V

	`/var/adm/messages` file ( )

	verifying
		automatic reboot on disk-path failures ( )
		`cldevice` command processing ( )
		cluster node status ( ) ( ) ( ) ( )
		installation mode ( )
		private hostnames ( )
		quorum configurations ( )
		SMF services ( ) ( ) ( ) ( ) ( )
		`vfstab` configuration ( )
		VxVM disk-group configurations ( )

	VERITAS File System (VxFS)
		administering ( )
		installing ( )
		mounting cluster file systems ( ) ( )
		planning ( ) ( )
		restrictions ( )

	VERITAS Volume Manager (VxVM)
		cluster feature
			creating shared disk groups ( )
			installation requirement ( )
		configuring ( )
			disk groups ( )
			local disk groups ( )
			non-VxVM nodes ( )
			volumes ( )
		device groups
			importing and deporting ( )
			reminoring ( )
		disk groups
			configuring ( )
			description of types ( )
			registering ( )
			troubleshooting local disk groups ( )
			troubleshooting registration ( )
			verifying configurations ( )
		encapsulating the root disk ( )
		Enclosure-Based Naming ( )
		installing ( ) ( )
		local disk groups
			configuring ( )
			description ( )
			troubleshooting ( )
		mirroring the encapsulated root disk ( )
		planning ( ) ( )
		raw-disk device names ( )
		root disk groups
			configuring on nonroot disks ( )
			configuring on root disks ( )
			planning ( ) ( )
			simple ( )
			unconfiguring from root disks ( )
		root disks
			caution when unencapsulating ( )
			encapsulating ( )
			unencapsulating ( )
		shared disk groups
			description ( )
		Solaris Volume Manager coexistence ( )
		unencapsulating the root disk ( )

	`vfstab` file
		adding mount points ( )
		verifying the configuration ( )

	VLAN adapters
		cluster interconnect guidelines ( )
		public network guidelines ( )

	volume managers
		See also Solaris Volume Manager
		See also VERITAS Volume Manager (VxVM)
		partitions for ( )
		planning
			general ( )
			Solaris Volume Manager ( )
			VERITAS Volume Manager ( )

	volumes
		Solaris Volume Manager
			activating ( )
			planning the maximum number ( )
			setting the maximum number ( )
		VxVM
			configuring ( )
			verifying ( )

	VxFS, See VERITAS File System (VxFS)

	`vxio` driver major number
		non-VxVM nodes ( )
		VxVM–installed nodes ( )

	VxVM, See VERITAS Volume Manager (VxVM)


X

	`xntpd.cluster` command, starting NTP ( )

	`xntpd` command
		starting NTP ( )
		stopping NTP ( )


Z

	ZFS storage pools, restriction against adding quorum disks ( )

	zones, See Solaris zones