您可以引导一个节点且不使其成为群集成员(即,处于非群集模式)。当安装群集软件或执行某些管理过程(如修补一个节点)时,非群集模式很有用。
此过程提供了 Sun Cluster 命令的长格式。此外,大多数命令还有简短格式。这些命令除了名称长短的不同以外,其功能都是相同的。有关命令及其简短格式的列表,请参见附录 A,Sun Cluster 面向对象的命令。
在将要以非群集模式启动的群集节点上,成为超级用户或使用一个可提供 solaris.cluster.admin RBAC 授权的角色。
使用 clnode evacuate 和 shutdown 命令关闭节点。
clnode evacuate 命令可将所有设备组从指定节点切换到下一个首选节点。此外,该命令还可将所有资源组从指定节点的全局或非全局区域切换到位于其他节点的下一个首选全局或非全局区域。
# clnode evacuate node # shutdown -g0 -y |
检验节点是否显示 ok 提示符(在基于 Solaris 的系统中)或 Press any key to continue 消息(在基于 x86 的系统的 GRUB 菜单)。
以非群集模式引导节点。
在基于 SPARC 的系统中,执行以下命令:
phys-schost# boot -xs |
在基于 x86 的系统中,执行以下命令:
phys-schost# shutdown -g -y -i0 Press any key to continue |
在 GRUB 菜单中,使用方向键选择适当的 Solaris 条目,然后键入 e 以编辑其命令。
GRUB 菜单显示如下内容:
GNU GRUB version 0.95 (631K lower / 2095488K upper memory) +-------------------------------------------------------------------------+ | Solaris 10 /sol_10_x86 | | Solaris failsafe | | | +-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line. |
有关基于 GRUB 进行引导的更多信息,请参见《System Administration Guide: Basic Administration》中的第 11 章 “GRUB Based Booting (Tasks)”。
在引导参数屏幕中,使用方向键选择内核条目,然后键入 e 以编辑该条目。
GRUB 引导参数屏幕的显示与以下内容类似:
GNU GRUB version 0.95 (615K lower / 2095552K upper memory) +----------------------------------------------------------------------+ | root (hd0,0,a) | | kernel /platform/i86pc/multiboot | | module /platform/i86pc/boot_archive | +----------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press 'b' to boot, 'e' to edit the selected command in the boot sequence, 'c' for a command-line, 'o' to open a new line after ('O' for before) the selected line, 'd' to remove the selected line, or escape to go back to the main menu. |
向命令中添加 -x 以指定将系统引导至非群集模式。
[ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ESC at any time exits. ] grub edit> kernel /platform/i86pc/multiboot -x |
按 Enter 键接受所做更改,并返回到引导参数屏幕。
屏幕将显示编辑后的命令。
GNU GRUB version 0.95 (615K lower / 2095552K upper memory) +----------------------------------------------------------------------+ | root (hd0,0,a) | | kernel /platform/i86pc/multiboot -x | | module /platform/i86pc/boot_archive | +----------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press 'b' to boot, 'e' to edit the selected command in the boot sequence, 'c' for a command-line, 'o' to open a new line after ('O' for before) the selected line, 'd' to remove the selected line, or escape to go back to the main menu.- |
键入 b 以将节点引导至非群集模式。
对内核引导参数命令所做的这一更改在系统引导后将失效。下次重新引导节点时,系统将引导至群集模式。如果希望引导至非群集模式,请重新执行上述步骤,并将 -x 选项添加到内核引导参数命令中。
以下示例显示了当系统关闭节点 phys-schost-1 并以非群集模式重新启动时控制台的输出。-g0 选项表示将宽限期设置为零,-y 选项表示在接收到要求确认的问题时自动回答 yes,而 -i0 选项则表示调用运行级别 0 (零)。群集中其他节点的控制台上也显示此节点的关闭消息。
# clnode evacuate phys-schost-1 # cluster shutdown -T0 -y Shutdown started. Wed Mar 10 13:47:32 phys-schost-1 cl_runtime: WARNING: CMM monitoring disabled. phys-schost-1# ... rg_name = schost-sa-1 ... offline node = phys-schost-2 ... num of node = 0 ... phys-schost-1# INIT: New run level: 0 The system is coming down. Please wait. System services are now being stopped. Print services stopped. syslogd: going down on signal 15 ... The system is down. syncing file systems... done WARNING: node phys-schost-1 is being shut down. Program terminated ok boot -x ... Not booting as part of cluster ... The system is ready. phys-schost-1 console login: |