[Ensure that the physical cable is installed.]
[Start the clsetup utility:]
# clsetup
[Select Cluster interconnect]

[Select either Add a transport cable, 
Add a transport adapter to a node, 
or Add a transport switch.}
[Answer the questions when prompted.]
   [You Will Need:  ]       
[Information:       Example:[
   node names             phys-schost-1
   adapter names          qfe2
   switch names         hub2
   transport type         dlpi
[Verify that the clinterconnect
 command completed successfully:]Command completed successfully.
Quit the clsetup Cluster Interconnect Menu and Main Menu. 
[Verify that the cable, adapter, and switch are added:]
# clinterconnect show phys-schost-1:qfe2,hub2
  ===Transport Cables ===
Transport Cable:                  phys-schost-1:qfe2@0,hub2
  Endpoint1:                  phys-schost-2:qfe0@0
  Endpoint2:                  ethernet-1@2 ???? Should this be hub2?
  State:                      Enabled

# clinterconnect show phys-schost-1:qfe2
=== Transport Adepters for qfe2
Transport Adapter:                             qfe2
  Adapter State:                                 Enabled
  Adapter Transport Type:                        dlpi
  Adapter Property (device_name):                ce
  Adapter Property (device_instance):            0
  Adapter Property (lazy_free):                  1
  Adapter Property (dlpi_heartbeat_timeout):     10000
  Adpater Property (dlpi_heartbeat_quantum):     1000
  Adapter Property (nw_bandwidth):               80
  Adapter Property (bandwidth):                  70
  Adapter Property (ip_address):                 172.16.0.129
  Adapter Property (netmask):                    255.255.255.128
  Adapter Port Names:                            0
  Adapter Port STate (0):                        Enabled

# clinterconnect show phys-schost-1:hub2

=== Transport Switches ===
Transport Switch:                              hub2
  Switch State:                                  Enabled
  Switch Type:                                   switch
  Switch Port Names:                             1 2
  Switch Port State(1):                          Enabled
  Switch Port State(2):                          Enabled