Sun Cluster Manager GUI를 사용하여 이 절차를 수행할 수도 있습니다. 자세한 내용은 Sun Cluster Manager 온라인 도움말을 참조하십시오.
이 옵션을 사용하면 기존 클러스터 전송 케이블을 사용할 수 있습니다.
이 절차에서는 장문형 Sun Cluster 명령을 제공합니다. 대부분의 명령에는 단문형도 있습니다. 명령은 명령 이름이 장문형과 단문형인 것을 제외하면 동일합니다. 명령 및 단문형 명령의 목록을 보려면 부록 A, Sun Cluster 객체 지향 명령를 참조하십시오.
임의의 클러스터의 노드에서 수퍼유저로 전환합니다.
clsetup 유틸리티를 시작합니다.
# clsetup |
주 메뉴가 표시됩니다.
클러스터 상호 연결 메뉴에 액세스하는 옵션에 해당하는 번호를 입력하고 Enter 키를 누릅니다.
전송 케이블 활성화하는 옵션에 해당하는 번호를 입력하고 Enter 키를 누릅니다.
화면의 지시를 따르십시오. 식별하려는 케이블 끝점 중 하나의 노드와 어댑터 이름을 모두 입력해야 합니다.
케이블이 활성화되었는지 확인합니다.
# clinterconnect show node:adapter,adapternode |
이 예는 노드 phys-schost-2에 있는 어댑터 qfe-1에서 클러스터 전송 케이블을 활성화하는 방법입니다.
[Become superuser on any node.] [Start the clsetup utility:] # clsetup [Select Cluster interconnect>Enable a transport cable.[ [Answer the questions when prompted.[ [You will need the following information.[ You Will Need: Information: Example: node names phys-schost-2 adapter names qfe1 switch names hub1 [Verify that the scinterconnect command was completed successfully:] clinterconnect enable phys-schost-2:qfe1 Command completed successfully. [Quit the clsetup Cluster Interconnect Menu and Main Menu.] [Verify that the cable is enabled:] # clinterconnect show phys-schost-1:qfe2,hub2 Transport cable: phys-schost-2:qfe1@0 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled |