How to Add a Highly Available Local File System to a Zone Cluster

Perform this procedure to add a highly available local file system on the global cluster for use by the zone cluster.

To add a ZFS pool to a zone cluster, instead perform procedures in How to Add a ZFS Storage Pool to a Zone Cluster.

1. On the global cluster, configure the highly available local file system that you want to use in the zone cluster.

   See Enabling Highly Available Local File Systems in Sun Cluster Data Services Planning and Administration Guide for Solaris OS.

2. Become superuser on a node of the global cluster that hosts the zone cluster.

   You perform all steps of the procedure from a node of the global cluster.

3. Display the /etc/vfstab entry for the file system that you want to mount on the zone cluster.

   phys-schost# vi /etc/vfstab

4. Add the file system to the zone-cluster configuration.

   phys-schost# clzonecluster configure zoneclustername clzc:zoneclustername> add fs clzc:zoneclustername:fs> set dir=mountpoint clzc:zoneclustername:fs> set special=disk-device-name clzc:zoneclustername:fs> set raw=raw-disk-device-name clzc:zoneclustername:fs> set type=FS-type clzc:zoneclustername:fs> end clzc:zoneclustername> exit

   dir=mountpoint

   Specifies the file system mount point

   special=disk-device-name

   Specifies the name of the disk device

   raw=raw-disk-device-name

   Specifies the name of the raw disk device

   type=FS-type

   Specifies the type of file system

5. Verify the addition of the file system.

   phys-schost# clzonecluster show -v zoneclustername

Example 6–4 Adding a Highly Available Local File System to a Zone Cluster

This example adds the highly available local file system /global/oracle/d1 for use by the sczone zone cluster.

phys-schost-1# vi /etc/vfstab
#device           device        mount   FS      fsck    mount   mount
#to mount         to fsck       point   type    pass    at boot options
#                     
/dev/md/oracle/dsk/d1 /dev/md/oracle/rdsk/d1 /global/oracle/d1 ufs 5 no logging

phys-schost-1# clzonecluster configure sczone
clzc:sczone> add fs
clzc:sczone:fs> set dir=/global/oracle/d1
clzc:sczone:fs> set special=/dev/md/oracle/dsk/d1
clzc:sczone:fs> set raw=/dev/md/oracle/rdsk/d1
clzc:sczone:fs> set type=ufs
clzc:sczone:fs> end
clzc:sczone> exit

phys-schost-1# clzonecluster show -v sczone
…
  Resource Name:                            fs
    dir:                                       /global/oracle/d1
    special:                                   /dev/md/oracle/dsk/d1
    raw:                                       /dev/md/oracle/rdsk/d1
    type:                                      ufs
    options:                                   []
…