执行此过程时,您必须先停止群集,使用 boot -sx 或 shtudown -g -y -i0 命令将每个节点引导至单用户模式,然后再应用修补程序。
在应用修补程序之前,请查看 Sun Cluster 产品 Web 站点中是否有关于安装前或安装后的特殊说明。
成为群集中任一节点上的超级用户。
关闭群集。
# cluster shutdown -y -g grace-period “message” |
指定在出现确认提示时回答 yes。
指定关闭前等待的时间,以秒为单位。默认宽限期为 60 秒。
指定要广播的警告消息。如果 message 中包含多个词,请使用引号。
将每个节点引导到非群集单用户模式。
在每个节点的控制台上,运行以下命令。
在基于 SPARC 的系统上,运行以下命令。
ok boot -sx |
在基于 x86 的系统上,运行以下命令。
phys-schost# shutdown -g -y -i0 Press any key to continue |
在 GRUB 菜单中,使用方向键选择适当的 Solaris 条目,然后键入 e 编辑其命令。
GRUB 菜单显示如下内容:
GNU GRUB version 0.95 (631K lower / 2095488K upper memory) +-------------------------------------------------------------------------+ | Solaris 10 /sol_10_x86 | | Solaris failsafe | | | +-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line. |
有关基于 GRUB 的引导的更多信息,请参见《系统管理指南:基本管理》中的“使用 GRUB 引导基于 x86 的系统(任务图)”。
在引导参数屏幕中,使用方向键选择内核条目,然后键入 e 编辑该条目。
GRUB 引导参数屏幕的显示与以下内容类似:
GNU GRUB version 0.95 (615K lower / 2095552K upper memory) +----------------------------------------------------------------------+ | root (hd0,0,a) | | kernel /platform/i86pc/multiboot | | module /platform/i86pc/boot_archive | +----------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press 'b' to boot, 'e' to edit the selected command in the boot sequence, 'c' for a command-line, 'o' to open a new line after ('O' for before) the selected line, 'd' to remove the selected line, or escape to go back to the main menu. |
向命令中添加 -sx 以指定将系统引导至非群集模式。
[ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ESC at any time exits. ] grub edit> kernel /platform/i86pc/multiboot -sx |
按 Enter 键接受所做更改,并返回到引导参数屏幕。
屏幕将显示编辑后的命令。
GNU GRUB version 0.95 (615K lower / 2095552K upper memory) +----------------------------------------------------------------------+ | root (hd0,0,a) | | kernel /platform/i86pc/multiboot -sx | | module /platform/i86pc/boot_archive | +----------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press 'b' to boot, 'e' to edit the selected command in the boot sequence, 'c' for a command-line, 'o' to open a new line after ('O' for before) the selected line, 'd' to remove the selected line, or escape to go back to the main menu.- |
键入 b 将节点引导至非群集模式。
对内核引导参数命令所做的这一更改在系统引导后将失效。下次重新引导节点时,系统将引导至群集模式。如果希望引导至非群集模式,请重新执行上述步骤,将 -sx 选项添加到内核引导参数命令中。
应用软件或固件的修补程序。
每次在一个节点上运行以下命令。
# patchadd -M patch-dir patch-id |
指定修补程序的目录位置。
指定给定修补程序的修补程序号。
每次都要按照修补程序目录中的、可替代本章中的过程的说明操作。
检验是否已成功地在每个节点上安装了修补程序。
# showrev -p | grep patch-id |
在将修补程序应用到所有节点后,重新将节点引导到群集中。
在每个节点上运行以下命令。
# reboot |
查看是否需要使用 scversions 命令来升级修补程序软件。
# /usr/cluster/bin/scversions |
您将会看见以下结果之一:
Upgrade commit is needed. Upgrade commit is NOT needed. All versions match. |
如果需要升级,请升级修补程序软件。
# scversions -c |
运行 scversions 将导致 CMM 进行一次或多次重新配置,这取决于具体情况。
检验修补程序是否有效,以及该节点和群集是否正常运行。
以下示例说明将一个需重新引导的 Sun Cluster 修补程序应用到一个群集的过程。
# cluster shutdown -g0 -y ... |
将群集引导到非群集单用户模式。
SPARC:键入以下内容:
ok boot -sx |
x86:将每个节点引导到非群集单用户模式下。参见上述过程以了解相关步骤。
... # patchadd -M /var/tmp/patches 234567-05 (Apply patch to other cluster nodes) ... # showrev -p | grep 234567-05 # reboot # scversions Upgrade commit is needed. # scversions -c |
如果需要取消修补程序,请参见更改 Sun Cluster 修补程序。