Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade T6340 Server Modules |
![]() |
Documentation, Support, and Training
Understanding ILOM for the Sun Blade T6340 Server Module
Chassis Monitoring Module Features
Resetting the Password to the Factory Default
Viewing and Configuring Host Control Information
Managing Host Diagnostics and POST
Managing System User Interactions
Managing the Service Processor
Changing Service Processor Settings to Factory Defaults
Change Console Escape Characters (CLI)
Changing Configuration Policy Settings
Managing Power Usage and Monitoring Power Consumption
Monitoring Active System Faults
Managing Virtual Keyswitch Settings
Configuring the Host for Using Remote Console With OpenBoot
Configuring the Host for Using Remote Console With Solaris OS
Sensors on the Sun Blade T6340 Server Module
Indicators on the Sun Blade T6340 Server Module
Limits to Backward Compatibility
Create an ALOM CMT Compatibility Shell
Switch Between the ALOM CMT Shell and the Host Console
Return to the ILOM From the ILOM CMT Shell
Comparing ILOM and ALOM CMT Commands
Event Messages Available Through the ALOM Compatibility Shell
Service Processor Usage Event Messages
Environmental Monitoring Event Messages
There are a number of different ways that you can connect to Oracle’s Sun Blade T6340 Server Module to use the remote console, as described in this figure.
Figure Legend
1 Server (local or remote)
2 Computer connected to RJ-45 Ethernet (remote ILOM Remote Console connections)
3 Ethernet cable connected to RJ-45 Ethernet connector on the chassis management module (CMM) (NET MGMT 0)
4 CMM with two connectors
5 RJ-45 cable connected to CMM serial port (SER MGT)
6 Computer connected to CMM RJ-45 serial connector
7 Computer connected to dongle cable RJ-45 serial connector
8 Keyboard, video monitor, mouse (local KVM)
9 Dongle cable with one RJ-45 serial, two USB 2 connectors and one HD15-pin connector (VGA)
10 Sun Blade T6340 Server Module with service processor (SP)