Before creating the pool, deploy the connector module (resource adapter) associated with the pool. The values that are specified for the new pool depend on the connector module that is deployed.
In the tree component, expand the Resource node and then the Connectors node. Select the Connector Connection Pools node. On the Connector Connection Pools page, click New.
On the first Create Connector Connection Pool page, specify the following settings:
Select a value from the Connection Definition combo box.
The choices in the combo box depend on the resource adapter you selected. The Connection Definition attribute identifies a resource adapter's connection-definition element in thera.xml file.
Click Next.
On the next Create Connector Connection Pool page, perform these tasks:
In the General Settings section verify that the values are correct.
For the fields in the Pool Settings section, the default values can be retained.
These settings can be changed at a later time. See To Edit a Connector Connection Pool.
In the Additional Properties table, add any required properties.
In the previous Create Connector Connection Pool page, you selected a class in the Connection Definition combo box. If this class is in the server’s classpath, then the Additional Properties table displays default properties.
Click Finish.
create-connector-connection-pool
In the tree component, expand the Resources node and then the Connectors node. Expand the Connector Connection Pools node and select the connector connection pool you want to edit.
On the Edit Connector Connection Pool page, you can change the settings of this connection pool. (Optional) Under General Settings, modify the description for the connection pool.
Under Pool Settings, you can specify the parameter values as explained in the following table.
Parameter |
Description |
Initial and Minimum Pool Size |
The minimum number of connections in the pool. This value also determines the number of connections placed in the pool when the pool is first created or when application server starts. |
Maximum Pool Size |
The maximum number of connections in the pool. |
Pool Resize Quantity |
When the pool scales up and scales down towards the maximum and minimum pool size respectively, it is resized in batches. This value determines the number of connections in the batch. Making this value too large will delay connection creation and recycling; making it too small will make it less efficient. |
Idle Timeout |
The maximum time in seconds that a connection can remain idle in the pool. After this time expires, the connection is removed from the pool. |
Max Wait Time |
The amount of time the application requesting a connection will wait before getting a connection timeout. |
On Any Failure |
If you select the checkbox labelled Close All Connections, if a single connection fails, then the application server will close all connections in the pool and then reestablish them. If you do not select the checkbox, then individual connections will be reestablished only when they are used. |
Transaction Support |
Use the Transaction Support list to select the type of transaction support for the connection pool. The chosen transaction support overrides the transaction support attribute in the resource adapter associated with this connection pool in a downward compatible way. In other words, it can support a lower transaction level than that specified in the resource adapter or the same transaction level as that specified in resource adapter, but it cannot specify a higher level. The transaction support options include the following. The None selection from the Transaction Support menu indicates that the resource adapter does not support resource manager local or JTA transactions and does not implement XAResource or LocalTransaction interfaces. For JAXR resource adapters, you need to choose None from the Transaction Support menu. JAXR resource adapters do not support local or JTA transactions. Local transaction support means that the resource adapter supports local transactions by implementing the LocalTransaction interface. Local transactions are managed internal to a resource manager and involve no external transaction managers. XA transaction support means that the resource adapter supports resource manager local and JTA transactions by implementing the LocalTransaction and XAResourceinterfaces. XA transactions are controlled and coordinated by a transaction manager external to a resource manager. Local transactions are managed internal to a resource manager and involve no external transaction managers. |
Connection Validation |
Select the Required checkbox to enable connection validation. |
Click Save.
Click Load Defaults if you want to restore the default values of all the settings.
You can use the asadmin get and set commands to view and change the values of the connection pool properties.
To list all the connector connection pools in the server:
asadmin list domain.resources.connector-connection-pool.*
To view the properties of the connector connection pool, you can use the following command:
asadmin get domain.resources.connector-connection-pool.conectionpoolname.*
To set a property of the connector connection pool, you can use the following command:
asadmin set domain.resources.connector-connection-pool.conectionpoolname.pool-resize-quantity=3
Use the Advanced tab to edit the advanced attributes for a connector connection pool.
Parameter |
Description |
Validate Atmost Once |
Amount of time, in seconds, after which a connection is validated at most once. This will help reduce the number of validation requests by a connection. The default value 0 implies that connection validation is not enabled. |
Leak Timeout |
Amount of time, in seconds, to trace connection leaks in a connection pool. The default value 0 means that connection leak tracing is disabled. If connection leak tracing is enabled, you can get statistics on the number of connection leaks in the Monitoring Resources tab. To view this tab, go to Application Server > Monitoring > Resources. |
Leak Reclaim |
If this option is enabled, leaked connections will be restored to the pool after leak connection tracing is complete. |
Creation Retry Attempts |
Number of attempts that will be made if there is a failure in creating a new connection. The default value of 0 implies that no attempts will be made to create the connection again. |
Retry Interval |
Specify the interval, in seconds, between two attempts to create a connection. The default value is 10 seconds. This attribute is used only if the value of Creation Retry Attempts is greater than 0. |
Lazy Association |
Connections are lazily associated when an operation is performed on them. Also, they are disassociated when the transaction is completed and a component method ends, which helps reuse of the physical connections. Default value is false. |
Lazy Connection Enlistment |
Enable this option to enlist a resource to the transaction only when it is actually used in a method. |
Associate with Thread |
Enable this option to associate a connection with the thread such that when the same thread is in need of a connection, it can reuse the connection already associated with it, thereby not incurring the overhead of getting a connection from the pool. Default value is false. |
Match Connections |
Use this option to switch on/off connection matching for the pool. It can be set to false if the administrator knows that the connections in the pool will always be homogeneous and hence a connection picked from the pool need not be matched by the resource adapter. Default value is false. |
Max Connection Usage |
Specify the number of times a connection should be reused by the pool. Once a connection is reused for the specified number of times, it will be closed. This is useful, for instance, to avoid statement-leaks. The default value of 0 implies that this attribute is not enabled. |
Click Save for the changes to take effect.
Click Load Defaults if you want to restore the default values of all the settings.
You can use the asadmin get and set commands to view and change the values of the connection pool properties.
To list all the connector connection pools in the server:
asadmin list domain.resources.connector-connection-pool.*
To view the properties of the connector connection pool, you can use the following command:
asadmin get domain.resources.connector-connection-pool.conectionpoolname.*
To set a property of the connector connection pool, you can use the following command:
asadmin set domain.resources.connector-connection-pool.conectionpoolname.validate-atmost-once-period-in-seconds=3
Use the Additional Properties tab to modify the properties of an existing pool.
The properties specified depend on the resource adapter used by this pool. The name-value pairs specified by the deployer using this table can be used to override the default values for the properties defined by the resource-adapter vendor.
Click Save for the changes to take effect.
You can create, edit, and delete security maps associated with connector connection pools.
In the Edit Connector Connection Pool page, click the Security Maps tabbed pane.
Click New to create a new security map.
In the New Security Map page, provide a name for the security map, a user name, and password.
Click OK.
In the Edit Connector Connection Pool page, click the Security Maps tabbed pane.
From the list of security maps, click the name of the security map that you want to edit.
Modify the values as desired, and click Save.
In the tree component, expand the Resources node and then the Connectors node.
Select the Connector Connection Pools node.
On the Connector Connection Pools page, select the checkbox for the pool to be deleted.
Click Delete.
delete-connector-connection-pool